[PATCH 08/11] lpfc: Allow support for BB credit recovery in point-to-point topology

[Justin Tee <justintee8345@gmail.com>]

Currently, BB credit recovery is excluded to fabric topology mode.  This
patch allows setting of BB_SC_N in PLOGIs and PLOGI_ACCs when in
point-to-point mode so that BB credit recovery can operate in
point-to-point topology as well.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
---
 drivers/scsi/lpfc/lpfc_els.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 0045c1e29619..b066ba83ce87 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -2279,7 +2279,8 @@ lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry)
 
 	sp->cmn.valid_vendor_ver_level = 0;
 	memset(sp->un.vendorVersion, 0, sizeof(sp->un.vendorVersion));
-	sp->cmn.bbRcvSizeMsb &= 0xF;
+	if (!test_bit(FC_PT2PT, &vport->fc_flag))
+		sp->cmn.bbRcvSizeMsb &= 0xF;
 
 	/* Check if the destination port supports VMID */
 	ndlp->vmid_support = 0;
@@ -5670,7 +5671,8 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag,
 			sp->cmn.valid_vendor_ver_level = 0;
 			memset(sp->un.vendorVersion, 0,
 			       sizeof(sp->un.vendorVersion));
-			sp->cmn.bbRcvSizeMsb &= 0xF;
+			if (!test_bit(FC_PT2PT, &vport->fc_flag))
+				sp->cmn.bbRcvSizeMsb &= 0xF;
 
 			/* If our firmware supports this feature, convey that
 			 * info to the target using the vendor specific field.
-- 
2.38.0