From: Justin Tee <justintee8345@gmail.com>
To: linux-scsi@vger.kernel.org
Cc: jsmart833426@gmail.com, justin.tee@broadcom.com,
Mathias Krause <minipli@grsecurity.net>,
Justin Tee <justintee8345@gmail.com>
Subject: [PATCH v2 1/1] scsi: lpfc: Properly set WC for DPP mapping
Date: Thu, 12 Feb 2026 11:23:27 -0800 [thread overview]
Message-ID: <20260212192327.141104-1-justintee8345@gmail.com> (raw)
From: Mathias Krause <minipli@grsecurity.net>
Using set_memory_wc() to enable write-combining for the DPP portion of
the MMIO mapping is wrong as set_memory_*() is meant to operate on RAM
only, not MMIO mappings. In fact, as used currently triggers a BUG_ON()
with enabled CONFIG_DEBUG_VIRTUAL.
Simply map the DPP region separately and in addition to the already
existing mappings, avoiding any possible negative side effects for
these.
Fixes: 1351e69fc6db ("scsi: lpfc: Add push-to-adapter support to sli4")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Justin Tee <justintee8345@gmail.com>
---
drivers/scsi/lpfc/lpfc_init.c | 2 ++
drivers/scsi/lpfc/lpfc_sli.c | 36 +++++++++++++++++++++++++++++------
drivers/scsi/lpfc/lpfc_sli4.h | 3 +++
3 files changed, 35 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index a116a16c4a6f..b5e53c7d33e7 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -12039,6 +12039,8 @@ lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba)
iounmap(phba->sli4_hba.conf_regs_memmap_p);
if (phba->sli4_hba.dpp_regs_memmap_p)
iounmap(phba->sli4_hba.dpp_regs_memmap_p);
+ if (phba->sli4_hba.dpp_regs_memmap_wc_p)
+ iounmap(phba->sli4_hba.dpp_regs_memmap_wc_p);
break;
case LPFC_SLI_INTF_IF_TYPE_1:
break;
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 734af3d039f8..690763e0aa55 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -15981,6 +15981,32 @@ lpfc_dual_chute_pci_bar_map(struct lpfc_hba *phba, uint16_t pci_barset)
return NULL;
}
+static __maybe_unused void __iomem *
+lpfc_dpp_wc_map(struct lpfc_hba *phba, uint8_t dpp_barset)
+{
+
+ /* DPP region is supposed to cover 64-bit BAR2 */
+ if (dpp_barset != WQ_PCI_BAR_4_AND_5) {
+ lpfc_log_msg(phba, KERN_WARNING, LOG_INIT,
+ "3273 dpp_barset x%x != WQ_PCI_BAR_4_AND_5\n",
+ dpp_barset);
+ return NULL;
+ }
+
+ if (!phba->sli4_hba.dpp_regs_memmap_wc_p) {
+ void __iomem *dpp_map;
+
+ dpp_map = ioremap_wc(phba->pci_bar2_map,
+ pci_resource_len(phba->pcidev,
+ PCI_64BIT_BAR4));
+
+ if (dpp_map)
+ phba->sli4_hba.dpp_regs_memmap_wc_p = dpp_map;
+ }
+
+ return phba->sli4_hba.dpp_regs_memmap_wc_p;
+}
+
/**
* lpfc_modify_hba_eq_delay - Modify Delay Multiplier on EQs
* @phba: HBA structure that EQs are on.
@@ -16944,9 +16970,6 @@ lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
uint8_t dpp_barset;
uint32_t dpp_offset;
uint8_t wq_create_version;
-#ifdef CONFIG_X86
- unsigned long pg_addr;
-#endif
/* sanity check on queue memory */
if (!wq || !cq)
@@ -17132,14 +17155,15 @@ lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
#ifdef CONFIG_X86
/* Enable combined writes for DPP aperture */
- pg_addr = (unsigned long)(wq->dpp_regaddr) & PAGE_MASK;
- rc = set_memory_wc(pg_addr, 1);
- if (rc) {
+ bar_memmap_p = lpfc_dpp_wc_map(phba, dpp_barset);
+ if (!bar_memmap_p) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"3272 Cannot setup Combined "
"Write on WQ[%d] - disable DPP\n",
wq->queue_id);
phba->cfg_enable_dpp = 0;
+ } else {
+ wq->dpp_regaddr = bar_memmap_p + dpp_offset;
}
#else
phba->cfg_enable_dpp = 0;
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index ee58383492b2..b6d90604bb61 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -785,6 +785,9 @@ struct lpfc_sli4_hba {
void __iomem *dpp_regs_memmap_p; /* Kernel memory mapped address for
* dpp registers
*/
+ void __iomem *dpp_regs_memmap_wc_p;/* Kernel memory mapped address for
+ * dpp registers with write combining
+ */
union {
struct {
/* IF Type 0, BAR 0 PCI cfg space reg mem map */
--
2.38.0
next reply other threads:[~2026-02-12 18:48 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-12 19:23 Justin Tee [this message]
2026-02-12 19:32 ` [PATCH v2 1/1] scsi: lpfc: Properly set WC for DPP mapping Mathias Krause
2026-02-18 2:11 ` Martin K. Petersen
2026-02-24 16:47 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260212192327.141104-1-justintee8345@gmail.com \
--to=justintee8345@gmail.com \
--cc=jsmart833426@gmail.com \
--cc=justin.tee@broadcom.com \
--cc=linux-scsi@vger.kernel.org \
--cc=minipli@grsecurity.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox