From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 40C5F26ED31; Sun, 8 Mar 2026 15:14:36 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=205.220.180.131 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1772982877; cv=none; b=rIP4cAJQdRCbJq2idK9b8A4PD0Jwo6KZNPTbWTMfP6pa8E1Mx82u9pEN8p49WaiHYy2MQOCAJREHJAKJndJZsl1P9P9XT1Eb80Jft6Q5g53rdOZMr5Ju5HWzqYB3bcT+LAyIGDIR6mLjpa52an1EEyFVsRQLIVnRN4c2r9HkmHc= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1772982877; c=relaxed/simple; bh=E4fFGB/5/RlU6Qh/XeTUmXPSr0ljF83EYbgzyktDLUg=; h=From:To:Cc:Subject:Date:Message-Id:MIME-Version; b=bo7AqOyE8jgkc5B3oVqS2femmDmnp2umE98XEJuSLC51PIgSbLI5G+buvusG1BZdjezwGIyZW2B8QJqKcMDn1absyy2H18bZTdI/9si4eKd7o3L3NnTz2gzNOT+AossI1tEUT5lqT4R85uXd/g4hBcmtdVroY44R48r9IagOoIQ= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=oss.qualcomm.com; spf=pass smtp.mailfrom=qualcomm.com; dkim=pass (2048-bit key) header.d=qualcomm.com header.i=@qualcomm.com header.b=ZcTmefrn; arc=none smtp.client-ip=205.220.180.131 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=oss.qualcomm.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=qualcomm.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=qualcomm.com header.i=@qualcomm.com header.b="ZcTmefrn" Received: from pps.filterd (m0279869.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.18.1.11/8.18.1.11) with ESMTP id 628Aubfu3505423; Sun, 8 Mar 2026 15:14:13 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=qualcomm.com; h= cc:content-transfer-encoding:date:from:message-id:mime-version :subject:to; s=qcppdkim1; bh=L6wwpnKtuOwHOrjm60nVxMezHxSgUmtLVef UEd3Gwpc=; b=ZcTmefrnfePMDnsL8+ec3ylGfV4chNf8DrnRjuMOjfpotB+g9lx 4jwafklOYjstDkebwXdYM7g6k8P+uFpv3Qex9h6DAhGrNM9iljd1AWbH7cCKvhWe Fnyua+TkYBy14uSwdypsv3lyW/+TzU6iINyfpGApUzJ63lqdpUmcfJHOhfC6FMHw 21vhpja6HFZKa3bMUYS/IYYANlXXQh7hlnSC+BAk6vJ5drJ+dF+YdqASDXEMWs5g tPsEZ5SuPu3JkViiN+XXg2mUg1WdYPm+0oDo+buPkY3hSFyhFtqrvBDqcOas//+J 4kl6sKScKJcMNvf+2zCbhciZrBXqLcuilEg== Received: from nalasppmta04.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 4crb14tu7e-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Sun, 08 Mar 2026 15:14:13 +0000 (GMT) Received: from pps.filterd (NALASPPMTA04.qualcomm.com [127.0.0.1]) by NALASPPMTA04.qualcomm.com (8.18.1.2/8.18.1.2) with ESMTP id 628FECjA029222; Sun, 8 Mar 2026 15:14:12 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NALASPPMTA04.qualcomm.com (PPS) with ESMTPS id 4crd3mjvae-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Sun, 08 Mar 2026 15:14:12 +0000 Received: from NALASPPMTA04.qualcomm.com (NALASPPMTA04.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 628FEBrO029213; Sun, 8 Mar 2026 15:14:11 GMT Received: from hu-devc-lv-u22-c.qualcomm.com (hu-cang-lv.qualcomm.com [10.81.25.255]) by NALASPPMTA04.qualcomm.com (PPS) with ESMTPS id 628FEBpY029207 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Sun, 08 Mar 2026 15:14:11 +0000 Received: by hu-devc-lv-u22-c.qualcomm.com (Postfix, from userid 359480) id 22C825A2; Sun, 8 Mar 2026 08:14:11 -0700 (PDT) From: Can Guo To: avri.altman@wdc.com, bvanassche@acm.org, beanhuo@micron.com, martin.petersen@oracle.com, mani@kernel.org Cc: linux-scsi@vger.kernel.org, Can Guo , Matthias Brugger , AngeloGioacchino Del Regno , linux-kernel@vger.kernel.org (open list:ARM/Mediatek SoC support:Keyword:mediatek), linux-arm-kernel@lists.infradead.org (moderated list:ARM/Mediatek SoC support:Keyword:mediatek), linux-mediatek@lists.infradead.org (moderated list:ARM/Mediatek SoC support:Keyword:mediatek) Subject: [PATCH v3 00/12] scsi: ufs: Add TX Equalization support for UFS 5.0 Date: Sun, 8 Mar 2026 08:13:57 -0700 Message-Id: <20260308151409.3779137-1-can.guo@oss.qualcomm.com> X-Mailer: git-send-email 2.34.1 Precedence: bulk X-Mailing-List: linux-scsi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Authority-Analysis: v=2.4 cv=IYSKmGqa c=1 sm=1 tr=0 ts=69ad9245 cx=c_pps a=ouPCqIW2jiPt+lZRy3xVPw==:117 a=ouPCqIW2jiPt+lZRy3xVPw==:17 a=Yq5XynenixoA:10 a=VkNPw1HP01LnGYTKEx00:22 a=u7WPNUs3qKkmUXheDGA7:22 a=_glEPmIy2e8OvE2BGh3C:22 a=QLgNSBeVHrqEueqQDqUA:9 X-Proofpoint-GUID: dXQESoPkDA4tqt1rOlzaFPmQdr93l97W X-Proofpoint-ORIG-GUID: dXQESoPkDA4tqt1rOlzaFPmQdr93l97W X-Proofpoint-Spam-Details-Enc: AW1haW4tMjYwMzA4MDE0MCBTYWx0ZWRfX+5JilGmmK8U2 l8xZLLRwMo0VWMqcs4CDAjl9vMmnmyUFZyXDx+vMt5Mmx7o4dbdNMqSuGus1g8f1XhVTwHuMo7L ROe8M+H5gChOXSV8AaqurxAFtS2+LsRcZqck/BDzT7DfHTuWZGOsFlistVpTplhtV9L3DPi4wJ2 l4t5SH3f6Z8rhUwD2CQHEQeZsqeFWrTSjSKgDyzmfe2Wxf+RB2y5evtEksFHp031aXiy9jtUbLv o/lODkMbrJC1UOpBzfeFx3JSSxYulxMfX7//lpRE/LPat7eSCfPbbKc3xxRPNwCQMkTS09vs1ej FfyAqziTD3w4UaNGrMyUtXvRqdKqII1z+M2J1VgCRRTZ1oCnnTrWQVZazPHDb8QCLhu/+KMj/Bn lkuRApGffay88fHZ/u01vKFU3LTnI+3Js4serrg20L5DQ6LfoXNCbkprC68rexK+W3DYx4kKovA Lk3xF3EfgszfCaaHRWQ== X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1143,Hydra:6.1.51,FMLib:17.12.100.49 definitions=2026-03-08_04,2026-03-06_02,2025-10-01_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 adultscore=0 suspectscore=0 lowpriorityscore=0 spamscore=0 impostorscore=0 phishscore=0 clxscore=1015 priorityscore=1501 malwarescore=0 bulkscore=0 classifier=typeunknown authscore=0 authtc= authcc= route=outbound adjust=0 reason=mlx scancount=1 engine=8.22.0-2602130000 definitions=main-2603080140 Hi, The UFS v5.0 and UFSHCI v5.0 standards have published, introducing support for HS-G6 (23.2 Gbps per lane) through the new UniPro V3.0 interconnect layer and M-PHY V6.0 physical layer specifications. To achieve reliable operation at these higher speeds, UniPro V3.0 introduces TX Equalization and Pre-Coding mechanisms that are essential for signal integrity. This patch series implements TX Equalization support in the UFS core driver as specified in UFSHCI v5.0, along with the necessary vendor operations and a reference implementation for Qualcomm UFS host controllers. Background ========== TX Equalization is a signal conditioning technique that compensates for channel impairments at high data rates (HS-G4 through HS-G6). It works by adjusting two key parameters: - PreShoot: Pre-emphasis applied before the main signal transition - DeEmphasis: De-emphasis applied after the main signal transition UniPro V3.0 defines TX Equalization Training (EQTR) procedure to automatically discover optimal TX Equalization settings. The EQTR procedure: 1. Starts from the most reliable link state (HS-G1) 2. Iterates through all possible PreShoot and DeEmphasis combinations 3. Evaluates signal quality using Figure of Merit (FOM) measurements 4. Selects the best settings for both host and device TX lanes For HS-G6, Pre-Coding is also introduced to further improve signal quality. Pre-Coding must be enabled on both transmitter and receiver when the RX_FOM indicates it is required. Implementation Overview ======================= The implementation follows the UFSHCI v5.0 specification and consists of: Core Infrastructure (Patches 1-6): - New vops callback negotiate_pwr_mode() to allow vendors to negotiate power mode parameters before applying TX Equalization settings - Support for HS-G6 gear enumeration - Complete TX EQTR procedure implementation in ufs-txeq.c - Debugfs interface for TX Equalization parameter inspection and manual retraining - Module parameters for adaptive TX Equalization control Qualcomm Implementation (Patches 7-11): - PHY-specific configurations for TX EQTR procedure - Vendor-specific FOM measurement support - TX Equalization settings application - Enable TX Equalization for HW version 0x7 and onwards The implementation is designed to be vendor-agnostic, with platform- specific details handled through the vops callbacks. Other vendors can add support by implementing the three new vops: - tx_eqtr_notify(): Called before/after TX EQTR for vendor setup - apply_tx_eqtr_settings(): Apply vendor-specific PHY configurations - get_rx_fom(): Retrieve vendor-specific FOM measurements if needed Module Parameters ================= The implementation provides several module parameters for flexibility: - use_adaptive_txeq: Enable/disable adaptive TX Equalization (default: false) - adaptive_txeq_gear: Minimum gear for adaptive TX EQ (default: HS-G6) - use_txeq_presets: Use only the 8 standard presets (default: true) - txeq_presets_selected[]: Select specific presets for EQTR Testing ======= This patch series has been tested on Qualcomm platforms with UFS 5.0 devices, validating: - Successful TX EQTR completion for HS-G6 - Proper FOM evaluation and optimal settings selection - Pre-Coding enablement for HS-G6 - Power mode changes with TX Equalization settings applied - Report of TX Equalization settings via debugfs entries - Report of TX EQTR histories via debug entries (see next section) - Re-training TX Equalization via debugfs entry Example of TX EQTR history ========================== # cat /sys/kernel/debug/ufshcd/*ufshcd*/tx_eq_hs_gear6/device_tx_eqtr_record Device TX EQTR record summary - Target Power Mode: HS-G6, Rate-B Number of records: 1 Last record timestamp: 11643252 us TX Lane 0 FOM - PreShoot\DeEmphasis \ 0 1 2 3 4 5 6 7 0 50 70 65 - - - - x 1 x x x x x x x x 2 100 90 70 - - - - x 3 x x x x x x x x 4 95 90 - - - - - x 5 - - - - - - - x 6 x x x x x x x x 7 x x x x x x x x TX Lane 1 FOM - PreShoot\DeEmphasis \ 0 1 2 3 4 5 6 7 0 50 70 60 - - - - x 1 x x x x x x x x 2 100 80 65 - - - - x 3 x x x x x x x x 4 95 85 - - - - - x 5 - - - - - - - x 6 x x x x x x x x 7 x x x x x x x x Patch Structure =============== Patches 1-3: Preparatory changes for power mode negotiation and HS-G6 Patch 4: Core TX Equalization and EQTR implementation Patches 5-7: Debugfs support for TX Equalization Patches 8-12: Qualcomm vendor implementation Next ==== One more series has been developed to enhance TX Equalization support, which will be submitted for review after this series is accepted: - Provide board specific (static) TX Equalization settings from DTS - Parse static TX Equalization settings from DTS if provided - Apply static TX Equalization settings if use_adaptive_txeq is disabled - Add support for UFS v5.0 attributes qTxEQGnSettings & wTxEQGnSettingsExt - Enable persistent storage and retrieval of optimal TX Equalization settings v2 -> v3: 1. Incorporated comments from Bart, Bean and Mani. 2. In patch 4, made ufshcd_config_pwr_mode() ignore TX EQTR error. 3. Added patch 6 to introduce helpers to pause/resume command processing. 4. In patch 7, changed debugfs entry to 'tx_eq_ctrl' and used 'refresh' as input to trigger TX Equalization refreshing. 5. In patch 7, renamed ufshcd_retrain_tx_eq() to ufshcd_refresh_tx_eq(). 6. Fixed typos and coding style issues. v1 -> v2: 1. Incorporated Bart's comments. 2. Fixed typos and coding style issues. 3. Added enum ufshcd_pmc_policy and use enum instead of boolen parameter. 4. Updated TX Equalization debugfs entries structure. 5. Extracted ufshcd_pause/resume_command_processing() in ufshcd.c. 6. Updated sequence in Qualcomm's vops get_rx_fom() implementation. Can Guo (12): scsi: ufs: core: Introduce a new ufshcd vops negotiate_pwr_mode() scsi: ufs: core: Pass force_pmc to ufshcd_config_pwr_mode() as a parameter scsi: ufs: core: Add UFS_HS_G6 and UFS_HS_GEAR_MAX to enum ufs_hs_gear_tag scsi: ufs: core: Add support for TX Equalization scsi: ufs: core: Add debugfs entries for TX Equalization params scsi: ufs: core: Add helpers to pause and resume command processing scsi: ufs: core: Add support to refresh TX Equalization via debugfs scsi: ufs: ufs-qcom: Fixup PAM-4 TX L0_L1_L2_L3 adaptation pattern length scsi: ufs: ufs-qcom: Implement vops tx_eqtr_notify() scsi: ufs: ufs-qcom: Implement vops get_rx_fom() scsi: ufs: ufs-qcom: Implement vops apply_tx_eqtr_settings() scsi: ufs: ufs-qcom: Enable TX Equalization drivers/ufs/core/Makefile | 2 +- drivers/ufs/core/ufs-debugfs.c | 272 ++++++ drivers/ufs/core/ufs-txeq.c | 1288 ++++++++++++++++++++++++++++ drivers/ufs/core/ufshcd-priv.h | 57 +- drivers/ufs/core/ufshcd.c | 187 +++- drivers/ufs/host/ufs-amd-versal2.c | 13 +- drivers/ufs/host/ufs-exynos.c | 44 +- drivers/ufs/host/ufs-hisi.c | 32 +- drivers/ufs/host/ufs-mediatek.c | 46 +- drivers/ufs/host/ufs-qcom.c | 602 ++++++++++++- drivers/ufs/host/ufs-qcom.h | 44 + drivers/ufs/host/ufs-sprd.c | 13 +- drivers/ufs/host/ufshcd-pci.c | 17 +- include/ufs/ufshcd.h | 145 +++- include/ufs/unipro.h | 141 ++- 15 files changed, 2788 insertions(+), 115 deletions(-) create mode 100644 drivers/ufs/core/ufs-txeq.c -- 2.34.1