public inbox for linux-scsi@vger.kernel.org
 help / color / mirror / Atom feed
From: palash.kambar@oss.qualcomm.com
To: mani@kernel.org, James.Bottomley@HansenPartnership.com,
	martin.petersen@oracle.com
Cc: linux-arm-msm@vger.kernel.org, linux-scsi@vger.kernel.org,
	linux-kernel@vger.kernel.org, bvanassche@acm.org,
	shawn.lin@rock-chips.com, nitin.rawat@oss.qualcomm.com,
	Palash Kambar <palash.kambar@oss.qualcomm.com>
Subject: [PATCH V2 2/2] ufs: ufs-qcom: Enable Auto Hibern8 clock request support
Date: Fri, 27 Mar 2026 14:33:46 +0530	[thread overview]
Message-ID: <20260327090346.656324-3-palash.kambar@oss.qualcomm.com> (raw)
In-Reply-To: <20260327090346.656324-1-palash.kambar@oss.qualcomm.com>

From: Palash Kambar <palash.kambar@oss.qualcomm.com>

On platforms that support Auto Hibern8 (AH8), the UFS controller can
autonomously de-assert clk_req signals to the GCC when entering the
Hibern8 state. This allows GCC to gate unused clocks, improving
power efficiency.

Enable the Clock Request feature by setting the UFS_HW_CLK_CTRL_EN
bit in the UFS_AH8_CFG register, as recommended in the Hardware
Programming Guidelines.

Signed-off-by: Palash Kambar <palash.kambar@oss.qualcomm.com>
---
 drivers/ufs/host/ufs-qcom.c | 11 +++++++++++
 drivers/ufs/host/ufs-qcom.h | 11 +++++++++++
 2 files changed, 22 insertions(+)

diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 8ebee0cc5313..0e653b34b00d 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -683,6 +683,14 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, bool is_pre_scale_up, unsign
 	return 0;
 }
 
+static void ufs_qcom_link_startup_post_change(struct ufs_hba *hba)
+{
+	if (ufshcd_is_auto_hibern8_supported(hba)) {
+		ufshcd_rmwl(hba, UFS_HW_CLK_CTRL_EN, UFS_HW_CLK_CTRL_EN,
+			    UFS_AH8_CFG);
+	}
+}
+
 static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
 					enum ufs_notify_change_status status)
 {
@@ -708,6 +716,9 @@ static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
 		 */
 		err = ufshcd_disable_host_tx_lcc(hba);
 
+		break;
+	case POST_CHANGE:
+		ufs_qcom_link_startup_post_change(hba);
 		break;
 	default:
 		break;
diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
index 380d02333d38..f19def37c86f 100644
--- a/drivers/ufs/host/ufs-qcom.h
+++ b/drivers/ufs/host/ufs-qcom.h
@@ -228,6 +228,17 @@ enum {
  */
 #define NUM_TX_R1W1 13
 
+/* bit definitions for UFS_AH8_CFG register */
+#define CC_UFS_SYS_CLK_REQ_EN          BIT(2)
+#define CC_UFS_ICE_CORE_CLK_REQ_EN     BIT(3)
+#define CC_UFS_UNIPRO_CORE_CLK_REQ_EN  BIT(4)
+#define CC_UFS_AUXCLK_REQ_EN           BIT(5)
+
+#define UFS_HW_CLK_CTRL_EN	(CC_UFS_SYS_CLK_REQ_EN |\
+				CC_UFS_ICE_CORE_CLK_REQ_EN |\
+				CC_UFS_UNIPRO_CORE_CLK_REQ_EN |\
+				CC_UFS_AUXCLK_REQ_EN)
+
 static inline void
 ufs_qcom_get_controller_revision(struct ufs_hba *hba,
 				 u8 *major, u16 *minor, u16 *step)
-- 
2.34.1


  parent reply	other threads:[~2026-03-27  9:04 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-27  9:03 [PATCH V2 0/2] Add post change sequence for link start notify palash.kambar
2026-03-27  9:03 ` [PATCH V2 1/2] ufs: core: Configure only active lanes during link palash.kambar
2026-03-27  9:31   ` Shawn Lin
2026-03-27 11:58     ` Palash Kambar
2026-03-27 21:17   ` Bart Van Assche
2026-04-03 11:58     ` Palash Kambar
2026-03-27  9:03 ` palash.kambar [this message]
2026-03-27 21:22   ` [PATCH V2 2/2] ufs: ufs-qcom: Enable Auto Hibern8 clock request support Bart Van Assche
2026-04-03 11:59     ` Palash Kambar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260327090346.656324-3-palash.kambar@oss.qualcomm.com \
    --to=palash.kambar@oss.qualcomm.com \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=bvanassche@acm.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=mani@kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=nitin.rawat@oss.qualcomm.com \
    --cc=shawn.lin@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox