From: Ranjan Kumar <ranjan.kumar@broadcom.com>
To: linux-scsi@vger.kernel.org, martin.petersen@oracle.com
Cc: sathya.prakash@broadcom.com, chandrakanth.patil@broadcom.com,
vishakhavc@google.com, ipylypiv@google.com,
Ranjan Kumar <ranjan.kumar@broadcom.com>
Subject: [PATCH v1 01/10] mpi3mr: Skip device shutdown during unload per controller configuration
Date: Fri, 26 Jun 2026 17:11:00 +0530 [thread overview]
Message-ID: <20260626114109.43685-2-ranjan.kumar@broadcom.com> (raw)
In-Reply-To: <20260626114109.43685-1-ranjan.kumar@broadcom.com>
The controller may be configured through Driver Page 1 to suppress
device shutdown requests during driver unload. Cache this setting and
skip the device shutdown request during IOC shutdown when unloading
the driver.
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
---
drivers/scsi/mpi3mr/mpi3mr.h | 3 +++
drivers/scsi/mpi3mr/mpi3mr_fw.c | 35 ++++++++++++++++++++++++---------
drivers/scsi/mpi3mr/mpi3mr_os.c | 2 ++
3 files changed, 31 insertions(+), 9 deletions(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index c25525fe0671..39096004c60a 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -1410,6 +1410,9 @@ struct mpi3mr_ioc {
struct dma_pool *trace_buf_pool;
struct segments *trace_buf;
u8 invalid_io_comp;
+ bool is_unload;
+ bool skip_dev_shutdown_on_unload;
+
};
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 31b19ed1528e..eb730318db47 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -4107,26 +4107,35 @@ static int mpi3mr_repost_diag_bufs(struct mpi3mr_ioc *mrioc)
}
/**
- * mpi3mr_read_tsu_interval - Update time stamp interval
+ * mpi3mr_read_driver_page1 - Read Driver Page 1 parameters
* @mrioc: Adapter instance reference
*
- * Update time stamp interval if its defined in driver page 1,
- * otherwise use default value.
+ * Reads and caches Driver Page 1 parameters such as
+ * timestamp update interval and driver behavior flags.
*
* Return: Nothing
*/
static void
-mpi3mr_read_tsu_interval(struct mpi3mr_ioc *mrioc)
+mpi3mr_read_driver_page1(struct mpi3mr_ioc *mrioc)
{
struct mpi3_driver_page1 driver_pg1;
u16 pg_sz = sizeof(driver_pg1);
int retval = 0;
mrioc->ts_update_interval = MPI3MR_TSUPDATE_INTERVAL;
+ mrioc->skip_dev_shutdown_on_unload = 0;
retval = mpi3mr_cfg_get_driver_pg1(mrioc, &driver_pg1, pg_sz);
- if (!retval && driver_pg1.time_stamp_update)
+
+ if (retval)
+ return;
+
+ if (driver_pg1.time_stamp_update)
mrioc->ts_update_interval = (driver_pg1.time_stamp_update * 60);
+
+ mrioc->skip_dev_shutdown_on_unload =
+ (driver_pg1.flags &
+ MPI3_DRIVER1_FLAGS_DEVICE_SHUTDOWN_ON_UNLOAD_DISABLE) ? 1 : 0;
}
/**
@@ -4432,7 +4441,7 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
goto out_failed_noretry;
}
- mpi3mr_read_tsu_interval(mrioc);
+ mpi3mr_read_driver_page1(mrioc);
mpi3mr_print_ioc_info(mrioc);
dprint_init(mrioc, "allocating host diag buffers\n");
@@ -4604,7 +4613,7 @@ int mpi3mr_reinit_ioc(struct mpi3mr_ioc *mrioc, u8 is_resume)
goto out_failed_noretry;
}
- mpi3mr_read_tsu_interval(mrioc);
+ mpi3mr_read_driver_page1(mrioc);
mpi3mr_print_ioc_info(mrioc);
if (is_resume) {
@@ -5089,8 +5098,16 @@ static void mpi3mr_issue_ioc_shutdown(struct mpi3mr_ioc *mrioc)
return;
}
- shutdown_action = MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_NORMAL |
- MPI3_SYSIF_IOC_CONFIG_DEVICE_SHUTDOWN_SEND_REQ;
+ shutdown_action = MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_NORMAL;
+
+ if (!(mrioc->is_unload && mrioc->skip_dev_shutdown_on_unload))
+ shutdown_action |=
+ MPI3_SYSIF_IOC_CONFIG_DEVICE_SHUTDOWN_SEND_REQ;
+ else
+ ioc_info(mrioc,
+ "The shutdown request is issued without the device shutdown bit set\n"
+ "as indicated by the controller configuration\n");
+
ioc_config = readl(&mrioc->sysif_regs->ioc_configuration);
ioc_config |= shutdown_action;
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index 402d1f35d214..d2a20f2721db 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -5665,6 +5665,8 @@ static void mpi3mr_remove(struct pci_dev *pdev)
return;
mrioc = shost_priv(shost);
+ mrioc->is_unload = true;
+
while (mrioc->reset_in_progress || mrioc->is_driver_loading)
ssleep(1);
--
2.47.3
next prev parent reply other threads:[~2026-06-26 11:48 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-26 11:40 [PATCH v1 00/10] mpi3mr: Few Enhancements and minor fixes Ranjan Kumar
2026-06-26 11:41 ` Ranjan Kumar [this message]
2026-06-26 12:03 ` [PATCH v1 01/10] mpi3mr: Skip device shutdown during unload per controller configuration sashiko-bot
2026-06-26 11:41 ` [PATCH v1 02/10] mpi3mr: Update MPI Headers to revision 41 Ranjan Kumar
2026-06-26 12:07 ` sashiko-bot
2026-06-26 11:41 ` [PATCH v1 03/10] mpi3mr: Add early timestamp synchronization after driver load Ranjan Kumar
2026-06-26 11:41 ` [PATCH v1 04/10] mpi3mr: Fix NVMe page size caching for non-operational devices Ranjan Kumar
2026-06-26 12:07 ` sashiko-bot
2026-06-26 11:41 ` [PATCH v1 05/10] mpi3mr: Fix performance regression caused by extended IRQ poll sleep Ranjan Kumar
2026-06-26 12:02 ` sashiko-bot
2026-06-26 11:41 ` [PATCH v1 06/10] mpi3mr: Fix memory leak on operational queue creation failure Ranjan Kumar
2026-06-26 12:02 ` sashiko-bot
2026-06-26 11:41 ` [PATCH v1 07/10] mpi3mr: Fix firmware event reference leak during cleanup Ranjan Kumar
2026-06-26 12:03 ` sashiko-bot
2026-06-26 11:41 ` [PATCH v1 08/10] mpi3mr: Fix SAS port allocation and registration error handling Ranjan Kumar
2026-06-26 12:06 ` sashiko-bot
2026-06-26 11:41 ` [PATCH v1 09/10] mpi3mr: Fix SAS PHY cleanup in host addition error paths Ranjan Kumar
2026-06-26 12:16 ` sashiko-bot
2026-06-26 11:41 ` [PATCH v1 10/10] mpi3mr: Driver version update to 8.18.0.8.50 Ranjan Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260626114109.43685-2-ranjan.kumar@broadcom.com \
--to=ranjan.kumar@broadcom.com \
--cc=chandrakanth.patil@broadcom.com \
--cc=ipylypiv@google.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=sathya.prakash@broadcom.com \
--cc=vishakhavc@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox