From: sashiko-bot@kernel.org
To: "Runyu Xiao" <runyu.xiao@seu.edu.cn>
Cc: linux-scsi@vger.kernel.org
Subject: Re: [PATCH v2] scsi: target: file: avoid recursive configfs open in fd_init_prot()
Date: Tue, 18 Aug 2026 07:50:32 +0000 [thread overview]
Message-ID: <20260818075033.6E96F1F000E9@smtp.kernel.org> (raw)
In-Reply-To: <20260818073539.1555605-1-runyu.xiao@seu.edu.cn>
Thank you for your contribution! Sashiko AI review found 6 potential issue(s) to consider:
- [High] Double fetch of `d_name.len` allows concurrent rename to cause a heap buffer overflow and use-after-free
- [High] AB-BA deadlock between the directory inode lock (`i_rwsem`) and filesystem freeze protection (`sb_writers`)
- [High] Synthesizing a `struct path` using a bind mount's vfsmount and the underlying dcache parent creates an invalid VFS object state
- [High] Opening an existing protection sidecar file does not verify its file type, allowing an unprivileged user to panic the kernel
- [Medium] Usage of the unexported static function `lookup_one_qstr_excl()` causes build failures, and passing an uninitialized `qstr.hash` corrupts the dcache
- [Medium] Missing validation of the backing file's parent directory and hashed state after acquiring the parent inode lock
--
--- Patch [1]: [PATCH v2] scsi: target: file: avoid recursive configfs open in fd_init_prot() ---
commit dff9df1c1570ab279457bc3f5bedd541efae3c74
Author: Runyu Xiao <runyu.xiao@seu.edu.cn>
scsi: target: file: avoid recursive configfs open in fd_init_prot()
This commit addresses a potential recursive configfs open issue when creating
protection sidecar files. It introduces fd_open_prot_file() to lookup, and
either create or open the protection sidecar directly from the configured
backing file's parent directory, instead of using filp_open() which might
re-enter configfs.
> diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c
> index 62ced9f5102ff..9872f8eda1ac4 100644
> --- a/drivers/target/target_core_file.c
> +++ b/drivers/target/target_core_file.c
[ ... ]
> @@ -86,6 +90,86 @@ static struct se_device *fd_alloc_device(struct se_hba *hba, const char *name)
> return &fd_dev->dev;
> }
>
> +static bool fd_backing_file_is_configfs(struct file *file)
> +{
> + return d_real(file_dentry(file), D_REAL_DATA)->d_sb->s_magic ==
> + CONFIGFS_MAGIC;
> +}
> +
> +static int fd_open_prot_file(struct file *file, int flags, umode_t mode,
> + struct file **filep)
> +{
> + struct dentry *backing_dentry = file_dentry(file);
> + struct path parent_path = {
> + .mnt = mntget(file->f_path.mnt),
> + .dentry = dget_parent(backing_dentry),
> + };
[Severity: High]
Does this create an invalid VFS object state if the backing file is a
file-level bind mount?
If the file was provided via a file-level bind mount, the vfsmount's root is
the file itself. Using dget_parent() escapes this root to the underlying parent
directory, and passing this disjoint path to dentry_open() or dentry_create()
could violate VFS invariants.
> + struct path prot_path = { .mnt = parent_path.mnt };
> + struct file *prot_file;
> + struct qstr prot_qname;
> + char *prot_name;
> + size_t prot_name_len;
> + int ret;
> +
> + if (fd_backing_file_is_configfs(file)) {
> + ret = -EINVAL;
> + goto out_put_parent;
> + }
> +
> + prot_name_len = backing_dentry->d_name.len + strlen(".protection");
> + if (prot_name_len > NAME_MAX) {
> + ret = -ENAMETOOLONG;
> + goto out_put_parent;
> + }
> +
> + prot_name = kmalloc(prot_name_len + 1, GFP_KERNEL);
> + if (!prot_name) {
> + ret = -ENOMEM;
> + goto out_put_parent;
> + }
> +
> + memcpy(prot_name, backing_dentry->d_name.name, backing_dentry->d_name.len);
[Severity: High]
Is there a risk of a heap buffer overflow here?
The length of d_name is read without locks to allocate prot_name via kmalloc().
If an unprivileged user renames the backing file concurrently to a longer name,
couldn't the second fetch of d_name.len during memcpy() exceed the allocated
buffer size?
> + memcpy(prot_name + backing_dentry->d_name.len, ".protection",
> + strlen(".protection") + 1);
> + prot_qname = QSTR_INIT(prot_name, prot_name_len);
> +
> + inode_lock_nested(d_inode(parent_path.dentry), I_MUTEX_PARENT);
[Severity: Medium]
Is there a missing check for concurrent renames or unlinks here?
The parent dentry was fetched locklessly via dget_parent(), but there is no
re-validation that backing_dentry->d_parent still matches parent_path.dentry,
or that the dentry is still hashed, after acquiring the inode lock.
> + prot_path.dentry = lookup_one_qstr_excl(&prot_qname, parent_path.dentry,
> + LOOKUP_CREATE);
[Severity: Medium]
Will this cause a build failure when compiled as a module?
lookup_one_qstr_excl() is a static function in fs/namei.c and is not exported
to modules.
Additionally, prot_qname is initialized above using QSTR_INIT() without
computing its hash. Does passing a qstr with a zero hash to low-level VFS
functions force dentries into bucket 0 and corrupt the dcache hash table?
> + if (IS_ERR(prot_path.dentry)) {
> + ret = PTR_ERR(prot_path.dentry);
> + goto out_unlock;
> + }
> +
> + if (d_is_negative(prot_path.dentry)) {
> + ret = mnt_want_write_file(file);
[Severity: High]
Does this invert the standard VFS lock ordering and risk an AB-BA deadlock?
The directory's i_rwsem is currently held via inode_lock_nested(), and
mnt_want_write_file() internally acquires sb_writers (read). The standard
order is sb_writers before i_rwsem, so this could deadlock against a
filesystem freeze which takes sb_writers exclusively.
> + if (ret)
> + goto out_dput;
> +
> + prot_file = dentry_create(&prot_path, flags, mode, current_cred());
> + mnt_drop_write_file(file);
> + } else {
> + prot_file = dentry_open(&prot_path, flags & ~O_CREAT,
> + current_cred());
[Severity: High]
Is there a check missing to ensure the existing protection sidecar is a regular
file?
If an unprivileged user preemptively creates a symlink named with .protection,
opening it directly via dentry_open() triggers a WARN_ON in do_dentry_open()
because symlinks generally have a NULL i_fop. This can panic the kernel on
systems with panic_on_warn.
> + }
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260818073539.1555605-1-runyu.xiao@seu.edu.cn?part=1
next prev parent reply other threads:[~2026-08-18 7:50 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-18 4:58 [PATCH] scsi: target: file: reject configfs-backed paths in configfs stores Runyu Xiao
2026-08-18 5:12 ` sashiko-bot
2026-08-18 7:35 ` [PATCH v2] scsi: target: file: avoid recursive configfs open in fd_init_prot() Runyu Xiao
2026-08-18 7:50 ` sashiko-bot [this message]
2026-08-18 9:13 ` [PATCH v3] " Runyu Xiao
2026-08-18 9:27 ` sashiko-bot
2026-08-18 10:16 ` [PATCH v4] " Runyu Xiao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260818075033.6E96F1F000E9@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=runyu.xiao@seu.edu.cn \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox