Linux SCSI subsystem development
 help / color / mirror / Atom feed
From: Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com>
To: jorge.ramirez@oss.qualcomm.com, beanhuo@iokpp.de,
	James.Bottomley@HansenPartnership.com,
	martin.petersen@oracle.com, alim.akhtar@samsung.com,
	avri.altman@wdc.com, bvanassche@acm.org, beanhuo@micron.com,
	can.guo@oss.qualcomm.com, sumit.garg@oss.qualcomm.com,
	jenswi@kernel.org
Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org,
	op-tee@lists.trustedfirmware.org
Subject: [PATCH v4 1/2] ufs: rpmb: retry power-on UNIT ATTENTION on the RPMB WLUN
Date: Thu, 27 Aug 2026 09:03:35 +0200	[thread overview]
Message-ID: <20260827070345.2853821-2-jorge.ramirez@oss.qualcomm.com> (raw)
In-Reply-To: <20260827070345.2853821-1-jorge.ramirez@oss.qualcomm.com>

After a power cycle, the first command sent to any UFS logical unit
completes with CHECK CONDITION reporting a power-on UNIT ATTENTION.
The SCSI core surfaces this condition to the caller rather than
retrying it.

For the RPMB well-known LU the first command after boot is the first
RPMB frame, and RPMB has no earlier, guaranteed access that could clear
the condition beforehand. The power-on UNIT ATTENTION therefore reaches
RPMB and fails that first frame, breaking RPMB on every cold boot.

The RPMB WLUN needs the power-on UNIT ATTENTION to be retried so that
RPMB works from the very first access after a power cycle.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com>
---
 drivers/ufs/core/ufs-rpmb.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/drivers/ufs/core/ufs-rpmb.c b/drivers/ufs/core/ufs-rpmb.c
index ffad049872b9..79e6cd2b20a0 100644
--- a/drivers/ufs/core/ufs-rpmb.c
+++ b/drivers/ufs/core/ufs-rpmb.c
@@ -21,6 +21,7 @@
 #include <linux/unaligned.h>
 #include "ufshcd-priv.h"
 
+#define UFS_RPMB_UA_RETRIES		3	/* Retries for the power-on UNIT ATTENTION */
 #define UFS_RPMB_SEC_PROTOCOL		0xEC	/* JEDEC UFS application */
 #define UFS_RPMB_SEC_PROTOCOL_ID	0x01	/* JEDEC UFS RPMB protocol ID, CDB byte3 */
 
@@ -40,6 +41,22 @@ struct ufs_rpmb_dev {
 static int ufs_sec_submit(struct ufs_hba *hba, u16 spsp, void *buffer, size_t len, bool send)
 {
 	struct scsi_device *sdev = hba->ufs_rpmb_wlun;
+	struct scsi_failure failure_defs[] = {
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = 0x29,	/* power on, reset, or bus device reset occurred */
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.allowed = UFS_RPMB_UA_RETRIES,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{}
+	};
+	struct scsi_failures failures = {
+		.failure_definitions = failure_defs,
+	};
+	const struct scsi_exec_args exec_args = {
+		.failures = &failures,
+	};
 	u8 cdb[12] = { };
 
 	cdb[0] = send ? SECURITY_PROTOCOL_OUT : SECURITY_PROTOCOL_IN;
@@ -48,7 +65,8 @@ static int ufs_sec_submit(struct ufs_hba *hba, u16 spsp, void *buffer, size_t le
 	put_unaligned_be32(len, &cdb[6]);
 
 	return scsi_execute_cmd(sdev, cdb, send ? REQ_OP_DRV_OUT : REQ_OP_DRV_IN,
-				buffer, len, /*timeout=*/30 * HZ, 0, NULL);
+				buffer, len, /*timeout=*/30 * HZ, /*retries=*/0,
+				&exec_args);
 }
 
 /* UFS RPMB route frames implementation */
-- 
2.54.0


  reply	other threads:[~2026-08-27  7:03 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-27  7:03 [PATCH v4 0/2] ufs: rpmb: make RPMB usable with OP-TEE key derivation Jorge Ramirez-Ortiz
2026-08-27  7:03 ` Jorge Ramirez-Ortiz [this message]
2026-08-27  7:03 ` [PATCH v4 2/2] ufs: rpmb: use a fixed-length RPMB dev_id Jorge Ramirez-Ortiz
2026-08-27  7:17   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260827070345.2853821-2-jorge.ramirez@oss.qualcomm.com \
    --to=jorge.ramirez@oss.qualcomm.com \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=alim.akhtar@samsung.com \
    --cc=avri.altman@wdc.com \
    --cc=beanhuo@iokpp.de \
    --cc=beanhuo@micron.com \
    --cc=bvanassche@acm.org \
    --cc=can.guo@oss.qualcomm.com \
    --cc=jenswi@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=op-tee@lists.trustedfirmware.org \
    --cc=sumit.garg@oss.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox