Linux SCSI subsystem development
 help / color / mirror / Atom feed
From: Joonhoe Kim <26rote@gmail.com>
To: James.Bottomley@HansenPartnership.com, mkp@kernel.org
Cc: alim.akhtar@samsung.com, bvanassche@acm.org, beanhuo@micron.com,
	stanleyjhu@google.com, peter.wang@mediatek.com,
	can.guo@oss.qualcomm.com, mani@kernel.org,
	linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org, stable@vger.kernel.org
Subject: [PATCH] scsi: ufs: core: Fix a deadlock between clock scaling and device commands
Date: Fri, 16 Oct 2026 21:46:08 +0900	[thread overview]
Message-ID: <20261016124608.46-1-26rote@gmail.com> (raw)

Since commit 08b12cda6c44 ("scsi: ufs: core: Switch to
scsi_get_internal_cmd()"), device management commands go through
blk_execute_rq() on the pseudo SCSI device, which shares the tagset
with the logical units, while ufshcd_dev_man_lock() holds
clk_scaling_lock for reading.

ufshcd_clock_scaling_prepare() and ufshcd_pause_command_processing()
quiesce the tagset before taking clk_scaling_lock for writing. A device
management command holding the lock for reading at that point is never
dispatched and never times out, so the writer waits forever with all
logical units quiesced. On a Lenovo Legion Tab Y700 Gen 5 this ended in
a hung task panic.

Take clk_scaling_lock before quiescing the tagset, and in
ufshcd_clock_scaling_prepare() also wb_mutex, which is always taken
before clk_scaling_lock. Release them in the reverse order. Commit
b52d695d0620 ("scsi: ufs: core: Keep internal commands dispatchable
during error handling") fixed the same problem in the error handler.

Fixes: 08b12cda6c44 ("scsi: ufs: core: Switch to scsi_get_internal_cmd()")
Fixes: dc5dcac53278 ("scsi: ufs: core: Add helpers to pause and resume command processing")
Cc: stable@vger.kernel.org
Signed-off-by: Joonhoe Kim <26rote@gmail.com>
---
Reproduced on v7.3-rc4 with out-of-tree board support, using short fio
write bursts and readers of the exception_event_status attribute while
devfreq scales: a deadlock within 10 s without this patch, two clean
600 s runs with it. The pause path was only checked by reading the
code, and the reversed release order only by building it. Sashiko
flagged this lock order in [1] and [2].

[1] https://lore.kernel.org/all/20260723130641.92FD31F000E9@smtp.kernel.org/
[2] https://lore.kernel.org/all/20260813222950.8C1581F00A3E@smtp.kernel.org/

 drivers/ufs/core/ufshcd.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index cc75384c6502..87f78ffc8cbd 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -1360,13 +1360,13 @@ int ufshcd_pause_command_processing(struct ufs_hba *hba, u64 timeout_us)
 	int ret = 0;
 
 	mutex_lock(&hba->host->scan_mutex);
-	blk_mq_quiesce_tagset(&hba->host->tag_set);
 	down_write(&hba->clk_scaling_lock);
+	blk_mq_quiesce_tagset(&hba->host->tag_set);
 
 	if (ufshcd_wait_for_pending_cmds(hba, timeout_us)) {
 		ret = -EBUSY;
-		up_write(&hba->clk_scaling_lock);
 		blk_mq_unquiesce_tagset(&hba->host->tag_set);
+		up_write(&hba->clk_scaling_lock);
 		mutex_unlock(&hba->host->scan_mutex);
 	}
 
@@ -1383,8 +1383,8 @@ void ufshcd_resume_command_processing(struct ufs_hba *hba)
 	__releases(&hba->clk_scaling_lock)
 	__releases(&hba->host->scan_mutex)
 {
-	up_write(&hba->clk_scaling_lock);
 	blk_mq_unquiesce_tagset(&hba->host->tag_set);
+	up_write(&hba->clk_scaling_lock);
 	mutex_unlock(&hba->host->scan_mutex);
 }
 
@@ -1461,16 +1461,16 @@ static int ufshcd_clock_scaling_prepare(struct ufs_hba *hba, u64 timeout_us)
 	 * clock scaling is in progress
 	 */
 	mutex_lock(&hba->host->scan_mutex);
-	blk_mq_quiesce_tagset(&hba->host->tag_set);
 	mutex_lock(&hba->wb_mutex);
 	down_write(&hba->clk_scaling_lock);
+	blk_mq_quiesce_tagset(&hba->host->tag_set);
 
 	if (!hba->clk_scaling.is_allowed ||
 	    ufshcd_wait_for_pending_cmds(hba, timeout_us)) {
 		ret = -EBUSY;
+		blk_mq_unquiesce_tagset(&hba->host->tag_set);
 		up_write(&hba->clk_scaling_lock);
 		mutex_unlock(&hba->wb_mutex);
-		blk_mq_unquiesce_tagset(&hba->host->tag_set);
 		mutex_unlock(&hba->host->scan_mutex);
 		goto out;
 	}
@@ -1487,9 +1487,9 @@ static void ufshcd_clock_scaling_unprepare(struct ufs_hba *hba, int err)
 	__releases(&hba->wb_mutex)
 	__releases(&hba->host->scan_mutex)
 {
+	blk_mq_unquiesce_tagset(&hba->host->tag_set);
 	up_write(&hba->clk_scaling_lock);
 	mutex_unlock(&hba->wb_mutex);
-	blk_mq_unquiesce_tagset(&hba->host->tag_set);
 	mutex_unlock(&hba->host->scan_mutex);
 
 	/* Enable Write Booster if current gear requires it else disable it */
-- 
2.43.0


                 reply	other threads:[~2026-10-16 12:46 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261016124608.46-1-26rote@gmail.com \
    --to=26rote@gmail.com \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=alim.akhtar@samsung.com \
    --cc=beanhuo@micron.com \
    --cc=bvanassche@acm.org \
    --cc=can.guo@oss.qualcomm.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=mani@kernel.org \
    --cc=mkp@kernel.org \
    --cc=peter.wang@mediatek.com \
    --cc=stable@vger.kernel.org \
    --cc=stanleyjhu@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox