[PATCH 21/21] scsi: mpi3mr: Use the correct conversion for the diag buffer post request

[Ranjan Kumar <ranjan.kumar@broadcom.com>]

The diag buffer post request is filled in with le64_to_cpu and le32_to_cpu
where cpu_to_le64 and cpu_to_le32 are meant. Both swap bytes the same way,
so the result does not change, but sparse reports the wrong direction.

Use the helpers that match the direction.

Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
---
 drivers/scsi/mpi3mr/mpi3mr_app.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/mpi3mr/mpi3mr_app.c b/drivers/scsi/mpi3mr/mpi3mr_app.c
index e38208241707..792c34ab5bdf 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_app.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_app.c
@@ -266,8 +266,8 @@ int mpi3mr_issue_diag_buf_post(struct mpi3mr_ioc *mrioc,
 	diag_buf_post_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS);
 	diag_buf_post_req.function = MPI3_FUNCTION_DIAG_BUFFER_POST;
 	diag_buf_post_req.type = diag_buffer->type;
-	diag_buf_post_req.address = le64_to_cpu(diag_buffer->dma_addr);
-	diag_buf_post_req.length = le32_to_cpu(diag_buffer->size);
+	diag_buf_post_req.address = cpu_to_le64(diag_buffer->dma_addr);
+	diag_buf_post_req.length = cpu_to_le32(diag_buffer->size);
 
 	if (diag_buffer->is_segmented)
 		diag_buf_post_req.msg_flags |= MPI3_DIAG_BUFFER_POST_MSGFLAGS_SEGMENTED;
-- 
2.47.3