public inbox for linux-scsi@vger.kernel.org
 help / color / mirror / Atom feed
From: "Alim Akhtar" <alim.akhtar@samsung.com>
To: "'Bart Van Assche'" <bvanassche@acm.org>,
	"'Martin K . Petersen'" <martin.petersen@oracle.com>,
	"'James E . J . Bottomley'" <jejb@linux.vnet.ibm.com>
Cc: <linux-scsi@vger.kernel.org>, "'Christoph Hellwig'" <hch@lst.de>,
	"'Kiwoong Kim'" <kwmad.kim@samsung.com>
Subject: RE: [PATCH] ufs-exynos: Move definitions from .h to .c
Date: Sun, 16 May 2021 07:42:33 +0530	[thread overview]
Message-ID: <21f801d749f8$efd9e2b0$cf8da810$@samsung.com> (raw)
In-Reply-To: <20210509213817.4348-1-bvanassche@acm.org>

Hi Bart,

> -----Original Message-----
> From: Bart Van Assche <bvanassche@acm.org>
> Sent: 10 May 2021 03:08
> To: Martin K . Petersen <martin.petersen@oracle.com>; James E . J .
> Bottomley <jejb@linux.vnet.ibm.com>
> Cc: linux-scsi@vger.kernel.org; Christoph Hellwig <hch@lst.de>; Bart Van
> Assche <bvanassche@acm.org>; Alim Akhtar <alim.akhtar@samsung.com>;
> Kiwoong Kim <kwmad.kim@samsung.com>
> Subject: [PATCH] ufs-exynos: Move definitions from .h to .c
> 
> In the Linux kernel definitions of data structures should occur in .c
files.
> Hence move the exynos7_uic_attr definition from a .h into a .c file.
> Additionally, declare exynos_ufs_drvs static. This patch fixes the
following
> two sparse warnings:
> 
> drivers/scsi/ufs/ufs-exynos.h:248:28: warning: symbol 'exynos_ufs_drvs'
> was not declared. Should it be static?
> drivers/scsi/ufs/ufs-exynos.h:250:28: warning: symbol 'exynos7_uic_attr'
> was not declared. Should it be static?
> 
> Cc: Alim Akhtar <alim.akhtar@samsung.com>
> Cc: Kiwoong Kim <kwmad.kim@samsung.com>
> Signed-off-by: Bart Van Assche <bvanassche@acm.org>
> ---
Just for the subject tag consistency, can add subsystem name , scsi: ufs:
<driver_name> 
Rest looks good.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>

>  drivers/scsi/ufs/ufs-exynos.c | 27 ++++++++++++++++++++++++++-
> drivers/scsi/ufs/ufs-exynos.h | 26 --------------------------
>  2 files changed, 26 insertions(+), 27 deletions(-)
> 
> diff --git a/drivers/scsi/ufs/ufs-exynos.c b/drivers/scsi/ufs/ufs-exynos.c
> index 70647eacf195..4c38689ecdd2 100644
> --- a/drivers/scsi/ufs/ufs-exynos.c
> +++ b/drivers/scsi/ufs/ufs-exynos.c
> @@ -107,6 +107,7 @@ enum {
> 
>  #define CNTR_DIV_VAL 40
> 
> +static struct exynos_ufs_drv_data exynos_ufs_drvs;
>  static void exynos_ufs_auto_ctrl_hcc(struct exynos_ufs *ufs, bool en);
> static void exynos_ufs_ctrl_clkstop(struct exynos_ufs *ufs, bool en);
> 
> @@ -1231,8 +1232,32 @@ static int exynos_ufs_remove(struct
> platform_device *pdev)
>  	return 0;
>  }
> 
> -struct exynos_ufs_drv_data exynos_ufs_drvs = {
> +static struct exynos_ufs_uic_attr exynos7_uic_attr = {
> +	.tx_trailingclks		= 0x10,
> +	.tx_dif_p_nsec			= 3000000,	/* unit: ns */
> +	.tx_dif_n_nsec			= 1000000,	/* unit: ns */
> +	.tx_high_z_cnt_nsec		= 20000,	/* unit: ns */
> +	.tx_base_unit_nsec		= 100000,	/* unit: ns */
> +	.tx_gran_unit_nsec		= 4000,		/* unit: ns */
> +	.tx_sleep_cnt			= 1000,		/* unit: ns */
> +	.tx_min_activatetime		= 0xa,
> +	.rx_filler_enable		= 0x2,
> +	.rx_dif_p_nsec			= 1000000,	/* unit: ns */
> +	.rx_hibern8_wait_nsec		= 4000000,	/* unit: ns */
> +	.rx_base_unit_nsec		= 100000,	/* unit: ns */
> +	.rx_gran_unit_nsec		= 4000,		/* unit: ns */
> +	.rx_sleep_cnt			= 1280,		/* unit: ns */
> +	.rx_stall_cnt			= 320,		/* unit: ns */
> +	.rx_hs_g1_sync_len_cap		= SYNC_LEN_COARSE(0xf),
> +	.rx_hs_g2_sync_len_cap		= SYNC_LEN_COARSE(0xf),
> +	.rx_hs_g3_sync_len_cap		= SYNC_LEN_COARSE(0xf),
> +	.rx_hs_g1_prep_sync_len_cap	= PREP_LEN(0xf),
> +	.rx_hs_g2_prep_sync_len_cap	= PREP_LEN(0xf),
> +	.rx_hs_g3_prep_sync_len_cap	= PREP_LEN(0xf),
> +	.pa_dbg_option_suite		= 0x30103,
> +};
> 
> +static struct exynos_ufs_drv_data exynos_ufs_drvs = {
>  	.compatible		= "samsung,exynos7-ufs",
>  	.uic_attr		= &exynos7_uic_attr,
>  	.quirks			= UFSHCD_QUIRK_PRDT_BYTE_GRAN |
> diff --git a/drivers/scsi/ufs/ufs-exynos.h b/drivers/scsi/ufs/ufs-exynos.h
> index 06ee565f7eb0..67505fe32ebf 100644
> --- a/drivers/scsi/ufs/ufs-exynos.h
> +++ b/drivers/scsi/ufs/ufs-exynos.h
> @@ -245,30 +245,4 @@ static inline void
> exynos_ufs_disable_dbg_mode(struct ufs_hba *hba)
>  	ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_MODE), FALSE);  }
> 
> -struct exynos_ufs_drv_data exynos_ufs_drvs;
> -
> -struct exynos_ufs_uic_attr exynos7_uic_attr = {
> -	.tx_trailingclks		= 0x10,
> -	.tx_dif_p_nsec			= 3000000,	/* unit: ns */
> -	.tx_dif_n_nsec			= 1000000,	/* unit: ns */
> -	.tx_high_z_cnt_nsec		= 20000,	/* unit: ns */
> -	.tx_base_unit_nsec		= 100000,	/* unit: ns */
> -	.tx_gran_unit_nsec		= 4000,		/* unit: ns */
> -	.tx_sleep_cnt			= 1000,		/* unit: ns */
> -	.tx_min_activatetime		= 0xa,
> -	.rx_filler_enable		= 0x2,
> -	.rx_dif_p_nsec			= 1000000,	/* unit: ns */
> -	.rx_hibern8_wait_nsec		= 4000000,	/* unit: ns */
> -	.rx_base_unit_nsec		= 100000,	/* unit: ns */
> -	.rx_gran_unit_nsec		= 4000,		/* unit: ns */
> -	.rx_sleep_cnt			= 1280,		/* unit: ns */
> -	.rx_stall_cnt			= 320,		/* unit: ns */
> -	.rx_hs_g1_sync_len_cap		= SYNC_LEN_COARSE(0xf),
> -	.rx_hs_g2_sync_len_cap		= SYNC_LEN_COARSE(0xf),
> -	.rx_hs_g3_sync_len_cap		= SYNC_LEN_COARSE(0xf),
> -	.rx_hs_g1_prep_sync_len_cap	= PREP_LEN(0xf),
> -	.rx_hs_g2_prep_sync_len_cap	= PREP_LEN(0xf),
> -	.rx_hs_g3_prep_sync_len_cap	= PREP_LEN(0xf),
> -	.pa_dbg_option_suite		= 0x30103,
> -};
>  #endif /* _UFS_EXYNOS_H_ */


  reply	other threads:[~2021-05-16  4:32 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20210509213827epcas5p173b48dab49036c8d85eadfc8bda9efd8@epcas5p1.samsung.com>
2021-05-09 21:38 ` [PATCH] ufs-exynos: Move definitions from .h to .c Bart Van Assche
2021-05-16  2:12   ` Alim Akhtar [this message]
2021-05-16 18:10     ` Bart Van Assche
2021-05-16 18:14       ` Martin K. Petersen
2021-05-21 20:07   ` Martin K. Petersen
2021-05-26  4:07   ` Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='21f801d749f8$efd9e2b0$cf8da810$@samsung.com' \
    --to=alim.akhtar@samsung.com \
    --cc=bvanassche@acm.org \
    --cc=hch@lst.de \
    --cc=jejb@linux.vnet.ibm.com \
    --cc=kwmad.kim@samsung.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox