From: Sumit Saxena <sumit.saxena@avagotech.com>
To: Tomas Henzl <thenzl@redhat.com>,
jbottomley@parallels.com, hch@infradead.org,
martin.petersen@oracle.com
Cc: linux-scsi@vger.kernel.org, Kashyap Desai <kashyap.desai@avagotech.com>
Subject: RE: [PATCH 12/15] megaraid_sas: MFI adapter's OCR changes
Date: Thu, 28 Jan 2016 16:42:49 +0530 [thread overview]
Message-ID: <2d1edcb95703bd130dffd7a05df2d4a8@mail.gmail.com> (raw)
In-Reply-To: <569E46C1.7060104@redhat.com>
> -----Original Message-----
> From: Tomas Henzl [mailto:thenzl@redhat.com]
> Sent: Tuesday, January 19, 2016 7:53 PM
> To: Sumit Saxena; jbottomley@parallels.com; hch@infradead.org;
> martin.petersen@oracle.com
> Cc: linux-scsi@vger.kernel.org; kashyap.desai@avagotech.com
> Subject: Re: [PATCH 12/15] megaraid_sas: MFI adapter's OCR changes
>
> On 18.12.2015 14:27, Sumit Saxena wrote:
> > Optimized MFI adapters' OCR path, particularly
> megasas_wait_for_outstanding() function.
> >
> > Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com>
> > Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com>
> > ---
> > drivers/scsi/megaraid/megaraid_sas_base.c | 104
> > +++++++++++++++--------------
> > 1 files changed, 54 insertions(+), 50 deletions(-)
> >
> > diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c
> > b/drivers/scsi/megaraid/megaraid_sas_base.c
> > index 5eaf6fd..cc843d6 100644
> > --- a/drivers/scsi/megaraid/megaraid_sas_base.c
> > +++ b/drivers/scsi/megaraid/megaraid_sas_base.c
> > @@ -2456,15 +2456,19 @@ void megasas_sriov_heartbeat_handler(unsigned
> long instance_addr)
> > */
> > static int megasas_wait_for_outstanding(struct megasas_instance
> > *instance) {
> > - int i;
> > + int i, sl, outstanding;
> > u32 reset_index;
> > u32 wait_time = MEGASAS_RESET_WAIT_TIME;
> > unsigned long flags;
> > struct list_head clist_local;
> > struct megasas_cmd *reset_cmd;
> > u32 fw_state;
> > - u8 kill_adapter_flag;
> >
> > + if (atomic_read(&instance->adprecovery) ==
> MEGASAS_HW_CRITICAL_ERROR) {
> > + dev_info(&instance->pdev->dev, "%s:%d HBA is killed.\n",
> > + __func__, __LINE__);
> > + return FAILED;
> > + }
> >
> > if (atomic_read(&instance->adprecovery) !=
> MEGASAS_HBA_OPERATIONAL)
> > {
> >
> > @@ -2521,7 +2525,7 @@ static int megasas_wait_for_outstanding(struct
> megasas_instance *instance)
> > }
> >
> > for (i = 0; i < resetwaittime; i++) {
> > - int outstanding = atomic_read(&instance->fw_outstanding);
> > + outstanding = atomic_read(&instance->fw_outstanding);
> >
> > if (!outstanding)
> > break;
> > @@ -2540,65 +2544,65 @@ static int megasas_wait_for_outstanding(struct
> megasas_instance *instance)
> > }
> >
> > i = 0;
> > - kill_adapter_flag = 0;
> > + outstanding = atomic_read(&instance->fw_outstanding);
> > + fw_state =
> > +instance->instancet->read_fw_status_reg(instance->reg_set) &
> > +MFI_STATE_MASK;
> > +
> > + if ((!outstanding && (fw_state == MFI_STATE_OPERATIONAL)))
> > + goto no_outstanding;
> > +
> > + if (instance->disableOnlineCtrlReset)
> > + goto kill_hba_and_failed;
> > do {
> > - fw_state = instance->instancet->read_fw_status_reg(
> > - instance->reg_set) &
> MFI_STATE_MASK;
> > - if ((fw_state == MFI_STATE_FAULT) &&
> > - (instance->disableOnlineCtrlReset == 0)) {
> > - if (i == 3) {
> > - kill_adapter_flag = 2;
> > - break;
> > - }
> > + if ((fw_state == MFI_STATE_FAULT) ||
atomic_read(&instance-
> >fw_outstanding)) {
> > + dev_info(&instance->pdev->dev,
> > + "%s:%d waiting_for_outstanding: before
issue
> OCR. FW state = 0x%x, oustanding 0x%x\n",
> > + __func__, __LINE__, fw_state,
> atomic_read(&instance->fw_outstanding));
> > + if (i == 3)
> > + goto kill_hba_and_failed;
> > megasas_do_ocr(instance);
> > - kill_adapter_flag = 1;
> >
> > - /* wait for 1 secs to let FW finish the pending
cmds */
> > - msleep(1000);
> > + if (atomic_read(&instance->adprecovery) ==
> MEGASAS_HW_CRITICAL_ERROR) {
> > + dev_info(&instance->pdev->dev, "%s:%d OCR
> failed and HBA is killed.\n",
> > + __func__, __LINE__);
> > + return FAILED;
> > + }
> > + dev_info(&instance->pdev->dev, "%s:%d
> waiting_for_outstanding: after issue OCR.\n",
> > + __func__, __LINE__);
> > +
> > + for (sl = 0; sl < 10; sl++)
> > + msleep(500);
>
> ssleep(5); ?
>
> > +
> > + outstanding = atomic_read(&instance-
> >fw_outstanding);
> > +
> > + fw_state = instance->instancet-
> >read_fw_status_reg(instance->reg_set) & MFI_STATE_MASK;
> > + if ((!outstanding && (fw_state ==
> MFI_STATE_OPERATIONAL)))
> > + goto no_outstanding;
> > }
> > i++;
> > } while (i <= 3);
> >
> > - if (atomic_read(&instance->fw_outstanding) && !kill_adapter_flag)
{
> > - if (instance->disableOnlineCtrlReset == 0) {
> > - megasas_do_ocr(instance);
> > +no_outstanding:
> >
> > - /* wait for 5 secs to let FW finish the pending
cmds */
> > - for (i = 0; i < wait_time; i++) {
> > - int outstanding =
> > - atomic_read(&instance-
> >fw_outstanding);
> > - if (!outstanding)
> > - return SUCCESS;
> > - msleep(1000);
> > - }
> > - }
> > - }
> > + dev_info(&instance->pdev->dev, "%s:%d no more pending commands
> remain after reset handling.\n",
> > + __func__, __LINE__);
> > + return SUCCESS;
> >
> > - if (atomic_read(&instance->fw_outstanding) ||
> > - (kill_adapter_flag == 2)) {
> > - dev_notice(&instance->pdev->dev, "pending cmds after
> reset\n");
> > - /*
> > - * Send signal to FW to stop processing any pending cmds.
> > - * The controller will be taken offline by the OS now.
> > - */
> > - if ((instance->pdev->device ==
> > - PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
> > - (instance->pdev->device ==
> > - PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
> > - writel(MFI_STOP_ADP,
> > - &instance->reg_set->doorbell);
> > - } else {
> > - writel(MFI_STOP_ADP,
> > - &instance->reg_set->inbound_doorbell);
> > - }
> > +kill_hba_and_failed:
> > +
> > + fw_state =
instance->instancet->read_fw_status_reg(instance->reg_set)
> & MFI_STATE_MASK;
> > + if (instance->disableOnlineCtrlReset ||
> > + atomic_read(&instance->fw_outstanding) ||
> > + (fw_state == MFI_STATE_FAULT)) {
>
> You have tested all that many times before (fw_state etc.), so when you
after all
> that have arrived at kill_hba_and_failed: please just kill the HBA and
return
> FAILED.
Agree..will be accommodating this while resending patch.
>
> > + /* Reset not supported, kill adapter */
> > + dev_info(&instance->pdev->dev, "%s:%d killing adapter
scsi%d"
> > + " disableOnlineCtrlReset %d fw_outstanding %d \n",
> > + __func__, __LINE__, instance->host->host_no,
> instance->disableOnlineCtrlReset,
> > + atomic_read(&instance->fw_outstanding));
> > megasas_dump_pending_frames(instance);
> > - atomic_set(&instance->adprecovery,
> MEGASAS_HW_CRITICAL_ERROR);
> > - return FAILED;
> > + megaraid_sas_kill_hba(instance);
> > }
> >
> > - dev_notice(&instance->pdev->dev, "no pending cmds after reset\n");
> > -
> > - return SUCCESS;
> > + return FAILED;
> > }
> >
> > /**
next prev parent reply other threads:[~2016-01-28 11:12 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-18 13:26 [PATCH 00/15] megaraid_sas: Updates for scsi-next Sumit Saxena
2015-12-18 13:26 ` [PATCH 01/15] megaraid_sas: Do not allow PCI access during OCR Sumit Saxena
2016-01-11 17:02 ` Tomas Henzl
2015-12-18 13:26 ` [PATCH 02/15] megaraid_sas: MFI IO timeout handling Sumit Saxena
2016-01-11 17:02 ` Tomas Henzl
2015-12-18 13:26 ` [PATCH 03/15] megaraid_sas: Syncing request flags macro names with firmware Sumit Saxena
2016-01-11 17:03 ` Tomas Henzl
2015-12-18 13:26 ` [PATCH 04/15] megaraid_sas: Task management support Sumit Saxena
2016-01-11 17:03 ` Tomas Henzl
2016-01-14 12:04 ` Sumit Saxena
2015-12-18 13:26 ` [PATCH 05/15] megaraid_sas: Update device Queue depth based on interface type Sumit Saxena
2016-01-12 14:16 ` Tomas Henzl
2016-01-14 11:48 ` Sumit Saxena
2015-12-18 13:26 ` [PATCH 06/15] megaraid_sas: Fastpath region lock bypass Sumit Saxena
2016-01-12 14:44 ` Tomas Henzl
2015-12-18 13:27 ` [PATCH 07/15] megaraid_sas: Reply Descriptor Post Queue(RDPQ) support Sumit Saxena
2015-12-18 14:49 ` [PATCH] megaraid_sas: fix kzalloc-simple.cocci warnings kbuild test robot
2015-12-18 14:49 ` [PATCH 07/15] megaraid_sas: Reply Descriptor Post Queue(RDPQ) support kbuild test robot
2016-01-14 17:38 ` Tomas Henzl
2016-01-27 18:15 ` Sumit Saxena
2015-12-18 13:27 ` [PATCH 08/15] megaraid_sas: Code optimization build_and_issue_cmd return-type Sumit Saxena
2016-01-14 18:05 ` Tomas Henzl
2015-12-18 13:27 ` [PATCH 09/15] megaraid_sas: Dual Queue depth support Sumit Saxena
2016-01-19 13:34 ` Tomas Henzl
2016-01-19 13:44 ` Sumit Saxena
2016-01-20 13:55 ` Tomas Henzl
2016-01-20 14:09 ` Sumit Saxena
2016-01-20 14:16 ` Tomas Henzl
2016-01-20 15:08 ` Sumit Saxena
2016-01-20 16:00 ` Tomas Henzl
2016-01-27 2:02 ` Martin K. Petersen
2016-01-27 7:09 ` Sumit Saxena
2015-12-18 13:27 ` [PATCH 10/15] megaraid_sas: IO throttling support Sumit Saxena
2016-01-19 13:38 ` Tomas Henzl
2016-01-28 7:18 ` Sumit Saxena
2015-12-18 13:27 ` [PATCH 11/15] megaraid_sas: Make adprecovery variable atomic Sumit Saxena
2016-01-19 13:52 ` Tomas Henzl
2016-01-28 8:30 ` Sumit Saxena
2015-12-18 13:27 ` [PATCH 12/15] megaraid_sas: MFI adapter's OCR changes Sumit Saxena
2016-01-19 14:22 ` Tomas Henzl
2016-01-28 11:12 ` Sumit Saxena [this message]
2015-12-18 13:27 ` [PATCH 13/15] megaraid_sas: Introduce module parameter for SCSI command-timeout Sumit Saxena
2016-01-19 14:57 ` Tomas Henzl
2016-01-28 11:17 ` Sumit Saxena
2015-12-18 13:27 ` [PATCH 14/15] megaraid_sas: SPERC OCR changes Sumit Saxena
2016-01-19 15:14 ` Tomas Henzl
2015-12-18 13:27 ` [PATCH 15/15] megaraid_sas: SPERC boot driver reorder Sumit Saxena
2015-12-18 14:05 ` Christoph Hellwig
2016-01-08 7:07 ` Sumit Saxena
2016-01-12 5:26 ` Sumit Saxena
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2d1edcb95703bd130dffd7a05df2d4a8@mail.gmail.com \
--to=sumit.saxena@avagotech.com \
--cc=hch@infradead.org \
--cc=jbottomley@parallels.com \
--cc=kashyap.desai@avagotech.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=thenzl@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).