From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Justin T. Gibbs" Subject: Re: AIC7902 lockups Date: Wed, 13 Aug 2003 12:37:19 -0600 Sender: linux-scsi-owner@vger.kernel.org Message-ID: <3244592704.1060799839@aslan.btc.adaptec.com> References: <20030811143610.A19365@laokoon.bug.net> <2429712704.1060622870@aslan.btc.adaptec.com> <20030811204139.A26663@laokoon.bug.net> Reply-To: "Justin T. Gibbs" Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Return-path: Received: from magic-mail.adaptec.com ([208.236.45.100]:26325 "EHLO magic.adaptec.com") by vger.kernel.org with ESMTP id S275324AbTHMSfk (ORCPT ); Wed, 13 Aug 2003 14:35:40 -0400 In-Reply-To: <20030811204139.A26663@laokoon.bug.net> Content-Disposition: inline List-Id: linux-scsi@vger.kernel.org To: Thomas Beutin , linux-scsi@vger.kernel.org >> The messages are not complete... the top is clipped. Were you >> using a serial console to capture this log? > No, i did a "dmesg > file", but it seems the buffer is full after > booting so the first parts are lost. I've put syslog files on the web: ... The logs are still not complete. As best I can tell, the controller is seeing CRC errors when talking to the Fujitsu drives, but these drives are hanging up the bus instead of responding to our ATN condition. I believe that these drives have newer firmware available that might aid in CRC error recovery, but you should also double check your cable, termination, etc. -- Justin