From: Hannes Reinecke <hare@suse.de>
To: Damien Le Moal <dlemoal@kernel.org>, linux-ide@vger.kernel.org
Cc: linux-scsi@vger.kernel.org,
"Martin K . Petersen" <martin.petersen@oracle.com>,
John Garry <john.g.garry@oracle.com>,
Rodrigo Vivi <rodrigo.vivi@intel.com>,
Paul Ausbeck <paula@soe.ucsc.edu>,
Kai-Heng Feng <kai.heng.feng@canonical.com>,
Joe Breuer <linux-kernel@jmbreuer.net>,
Geert Uytterhoeven <geert@linux-m68k.org>,
Chia-Lin Kao <acelan.kao@canonical.com>
Subject: Re: [PATCH v3 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
Date: Fri, 15 Sep 2023 14:30:23 +0200 [thread overview]
Message-ID: <3404155e-a436-612e-970c-13c17a9b59ff@suse.de> (raw)
In-Reply-To: <20230915081507.761711-10-dlemoal@kernel.org>
On 9/15/23 10:14, Damien Le Moal wrote:
> If an error occurs when resuming a host adapter before the devices
> attached to the adapter are resumed, the adapter low level driver may
> remove the scsi host, resulting in a call to sd_remove() for the
> disks of the host. This in turn results in a call to sd_shutdown() which
> will issue a synchronize cache command and a start stop unit command to
> spindown the disk. sd_shutdown() issues the commands only if the device
> is not already suspended but does not check the power state for
> system-wide suspend/resume. That is, the commands may be issued with the
> device in a suspended state, which causes PM resume to hang, forcing a
> reset of the machine to recover.
>
> Fix this by not calling sd_shutdown() in sd_remove() if the device
> is not running.
>
> Cc: stable@vger.kernel.org
> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
> ---
> drivers/scsi/sd.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
> index 1d106c8ad5af..d86306d42445 100644
> --- a/drivers/scsi/sd.c
> +++ b/drivers/scsi/sd.c
> @@ -3727,7 +3727,8 @@ static int sd_remove(struct device *dev)
>
> device_del(&sdkp->disk_dev);
> del_gendisk(sdkp->disk);
> - sd_shutdown(dev);
> + if (sdkp->device->sdev_state == SDEV_RUNNING)
> + sd_shutdown(dev);
>
> put_disk(sdkp->disk);
> return 0;
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cheers,
Hannes
--
Dr. Hannes Reinecke Kernel Storage Architect
hare@suse.de +49 911 74053 688
SUSE Software Solutions Germany GmbH, Frankenstr. 146, 90461 Nürnberg
Managing Directors: I. Totev, A. Myers, A. McDonald, M. B. Moerman
(HRB 36809, AG Nürnberg)
next prev parent reply other threads:[~2023-09-15 12:30 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-15 8:14 [PATCH v3 00/23] Fix libata suspend/resume handling and code cleanup Damien Le Moal
2023-09-15 8:14 ` [PATCH v3 01/23] ata: libata-core: Fix ata_port_request_pm() locking Damien Le Moal
2023-09-19 13:21 ` Niklas Cassel
2023-09-19 16:31 ` Damien Le Moal
2023-09-20 7:21 ` Niklas Cassel
2023-09-20 7:30 ` Niklas Cassel
2023-09-20 10:22 ` Damien Le Moal
2023-09-20 10:20 ` Damien Le Moal
2023-09-15 8:14 ` [PATCH v3 02/23] ata: libata-core: Fix port and device removal Damien Le Moal
2023-09-19 13:21 ` Niklas Cassel
2023-09-19 17:42 ` Damien Le Moal
2023-09-15 8:14 ` [PATCH v3 03/23] ata: libata-scsi: link ata port and scsi device Damien Le Moal
2023-09-19 13:21 ` Niklas Cassel
2023-09-19 16:27 ` Damien Le Moal
2023-09-15 8:14 ` [PATCH v3 04/23] scsi: sd: Differentiate system and runtime start/stop management Damien Le Moal
2023-09-15 12:26 ` Hannes Reinecke
2023-09-15 8:14 ` [PATCH v3 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop Damien Le Moal
2023-09-15 12:27 ` Hannes Reinecke
2023-09-15 8:14 ` [PATCH v3 06/23] scsi: Do not attempt to rescan suspended devices Damien Le Moal
2023-09-15 12:29 ` Hannes Reinecke
2023-09-19 13:59 ` Niklas Cassel
2023-09-15 8:14 ` [PATCH v3 07/23] ata: libata-scsi: Fix delayed scsi_rescan_device() execution Damien Le Moal
2023-09-15 12:29 ` Hannes Reinecke
2023-09-19 14:00 ` Niklas Cassel
2023-09-15 8:14 ` [PATCH v3 08/23] ata: libata-core: Do not register PM operations for SAS ports Damien Le Moal
2023-09-15 8:14 ` [PATCH v3 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown Damien Le Moal
2023-09-15 12:30 ` Hannes Reinecke [this message]
2023-09-15 14:31 ` Bart Van Assche
2023-09-15 8:14 ` [PATCH v3 10/23] ata: libata-core: Fix compilation warning in ata_dev_config_ncq() Damien Le Moal
2023-09-15 8:14 ` [PATCH v3 11/23] ata: libata-eh: Fix compilation warning in ata_eh_link_report() Damien Le Moal
2023-09-15 8:14 ` [PATCH v3 12/23] scsi: Remove scsi device no_start_on_resume flag Damien Le Moal
2023-09-15 8:14 ` [PATCH v3 13/23] ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat() Damien Le Moal
2023-09-15 8:14 ` [PATCH v3 14/23] ata: libata-core: Synchronize ata_port_detach() with hotplug Damien Le Moal
2023-09-15 8:14 ` [PATCH v3 15/23] ata: libata-core: Detach a port devices on shutdown Damien Le Moal
2023-09-15 8:15 ` [PATCH v3 16/23] ata: libata-core: Remove ata_port_suspend_async() Damien Le Moal
2023-09-15 8:15 ` [PATCH v3 17/23] ata: libata-core: Remove ata_port_resume_async() Damien Le Moal
2023-09-15 8:15 ` [PATCH v3 18/23] ata: libata-core: Do not poweroff runtime suspended ports Damien Le Moal
2023-09-15 8:15 ` [PATCH v3 19/23] ata: libata-core: Do not resume " Damien Le Moal
2023-09-15 8:15 ` [PATCH v3 20/23] ata: libata-sata: Improve ata_sas_slave_configure() Damien Le Moal
2023-09-15 8:15 ` [PATCH v3 21/23] ata: libata-eh: Improve reset error messages Damien Le Moal
2023-09-15 8:15 ` [PATCH v3 22/23] ata: libata-eh: Reduce "disable device" message verbosity Damien Le Moal
2023-09-15 8:15 ` [PATCH v3 23/23] ata: libata: Cleanup inline DMA helper functions Damien Le Moal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3404155e-a436-612e-970c-13c17a9b59ff@suse.de \
--to=hare@suse.de \
--cc=acelan.kao@canonical.com \
--cc=dlemoal@kernel.org \
--cc=geert@linux-m68k.org \
--cc=john.g.garry@oracle.com \
--cc=kai.heng.feng@canonical.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@jmbreuer.net \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=paula@soe.ucsc.edu \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox