From: Friedrich Lobenstock <fl@fl.priv.at>
To: linux-scsi@vger.kernel.org
Subject: Is this a termination problem?
Date: Fri, 12 Apr 2002 03:07:33 +0200 [thread overview]
Message-ID: <3CB63355.F90055C@fl.priv.at> (raw)
Hi!
I'm having trouble with a remote server. Can someone tell if the
message below comes from a scsi termination problem?
Apr 12 02:48:27 backup kernel: (scsi1:0:3:-1) Unexpected busfree, LASTPHASE = 0xa0, SEQADDR = 0x162
Apr 12 02:48:28 backup kernel: st0: Error with sense data: Current st09:00: sns = 70 5
Apr 12 02:48:28 backup kernel: ASC=20 ASCQ= 0
Apr 12 02:48:28 backup kernel: Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0e 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 0x2c 0x01 0x00 0x00 0x00 0x00
This is with the old aic7xxx driver, but with the newer (Adaptec) aic7xxx
driver I get similar messages:
Apr 11 08:59:40 backup kernel: (scsi1:A:3:0): Unexpected busfree in Message-out phase
Apr 11 08:59:40 backup kernel: SEQADDR == 0x168
Apr 11 08:59:40 backup kernel: st0: Error 70000 (sugg. bt 0x0, driver bt 0x0, host bt 0x7).
Apr 11 08:59:40 backup kernel: st0: Error with sense data: Current st09:00: sns = 70 5
Apr 11 08:59:40 backup kernel: ASC=20 ASCQ= 0
Apr 11 08:59:40 backup kernel: Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0e 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 0x2c 0x01 0x00 0x00 0x00 0x00
The setup:
backup:~ # uname -a
Linux backup 2.4.16-4GB #1 Fri Mar 22 15:38:04 GMT 2002 i686 unknown
backup:~ # cat /etc/SuSE-release
SuSE Linux 7.3 (i386)
VERSION = 7.3
backup:~ # cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: 3ware Model: 3w-xxxx Rev: 1.0
Type: Direct-Access ANSI SCSI revision: ffffffff
Host: scsi1 Channel: 00 Id: 03 Lun: 00
Vendor: HP Model: Ultrium 1-SCSI Rev: E15D
Type: Sequential-Access ANSI SCSI revision: 03
backup:~ # cat /proc/scsi/aic7xxx/1
Adaptec AIC7xxx driver version: 5.2.4/5.2.0
Compile Options:
TCQ Enabled By Default : Enabled
AIC7XXX_PROC_STATS : Enabled
Adapter Configuration:
SCSI Adapter: Adaptec AIC-7892 Ultra 160/m SCSI host adapter
Ultra-160/m LVD/SE Wide Controller at PCI 0/9/0
PCI MMAPed I/O Base: 0xdffee000
Adapter SEEPROM Config: SEEPROM found and used.
Adaptec SCSI BIOS: Enabled
IRQ: 11
SCBs: Active 0, Max Active 1,
Allocated 31, HW 32, Page 255
Interrupts: 159823
BIOS Control Word: 0x08f4
Adapter Control Word: 0x7c5d
Extended Translation: Enabled
Disconnect Enable Flags: 0xffff
Ultra Enable Flags: 0x0000
Tag Queue Enable Flags: 0x0000
Ordered Queue Tag Flags: 0x0000
Default Tag Queue Depth: 24
Tagged Queue By Device array for aic7xxx host instance 0:
{0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}
Actual queue depth per device for aic7xxx host instance 0:
{1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}
Statistics:
(scsi1:0:3:0)
Device using Wide/Sync transfers at 80.0 MByte/sec, offset 15
Transinfo settings: current(10/15/1/0), goal(9/127/1/0), user(9/127/1/2)
Total transfers 159701 (2 reads and 159699 writes)
< 2K 2K+ 4K+ 8K+ 16K+ 32K+ 64K+ 128K+
Reads: 0 0 0 1 0 1 0 0
Writes: 0 0 0 79866 11 79822 0 0
PS: As I'm not on this list please CC me on any replies. THX.
--
MfG / Regards
Friedrich Lobenstock
reply other threads:[~2002-04-12 1:07 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3CB63355.F90055C@fl.priv.at \
--to=fl@fl.priv.at \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox