From: Fabio Massimo Di Nitto <fabbione@fabbione.net>
To: Patrick Mansfield <patmans@us.ibm.com>
Cc: "Thomas Langås" <tlan@stud.ntnu.no>,
linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: Linux Kernel 2.4.18 and 2.4.19 problems
Date: Fri, 19 Jul 2002 23:26:14 +0200 [thread overview]
Message-ID: <3D3883F6.7090608@fabbione.net> (raw)
In-Reply-To: 20020719140416.A25577@eng2.beaverton.ibm.com
Patrick Mansfield wrote:
>On Fri, Jul 19, 2002 at 09:26:07PM +0200, Thomas Langås wrote:
>
>
>>qla2x00_set_info starts at address = f8836060
>>qla2x00: Found VID=1077 DID=2200 SSVID=1077 SSDID=2
>>scsi1: Found a QLA2200 @ bus 2, device 0x4, irq 16, iobase 0xdc00
>>scsi(1): Allocated 4096 SRB(s)
>>PCI: Setting latency timer of device 02:04.0 to 64
>>scsi(1): Configure NVRAM parameters...
>>scsi(1): 64 Bit PCI Addressing Enabled
>>scsi(1): Verifying loaded RISC code...
>>scsi(1): Verifying chip...
>>scsi(1): Waiting for LIP to complete...
>>scsi(1): Cable is unplugged...
>>qla2x00: Found VID=1077 DID=2200 SSVID=1077 SSDID=2
>>scsi2: Found a QLA2200 @ bus 2, device 0x5, irq 17, iobase 0xd800
>>scsi(2): Allocated 4096 SRB(s)
>>PCI: Setting latency timer of device 02:05.0 to 64
>>scsi(2): Configure NVRAM parameters...
>>scsi(2): 64 Bit PCI Addressing Enabled
>>scsi(2): Verifying loaded RISC code...
>>scsi(2): Verifying chip...
>>scsi(2): Waiting for LIP to complete...
>>scsi(2): Cable is unplugged...
>>
I have an HSG80 connected on the other side and I got this problem with
the beta6 drivers from qlogic.
The only way I made it working was using the kernel driver shipped with
rh7.3
that has been modified to support the HSG80 (according to the changelog
supported
only by the beta6 series).
Fabio
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2002-07-19 21:26 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-07-19 19:26 Linux Kernel 2.4.18 and 2.4.19 problems Thomas Langås
2002-07-19 21:04 ` Patrick Mansfield
2002-07-19 21:21 ` Thomas Langås
2002-07-19 21:26 ` Fabio Massimo Di Nitto [this message]
2002-07-19 21:44 ` Thomas Langås
2002-07-19 22:36 ` Austin Gonyou
[not found] ` <1027118177.7800.15.camel@UberGeek>
2002-07-19 22:55 ` Thomas Langås
2002-07-25 12:40 ` Bill Davidsen
2002-07-21 2:46 ` Thomas Langås
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D3883F6.7090608@fabbione.net \
--to=fabbione@fabbione.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=patmans@us.ibm.com \
--cc=tlan@stud.ntnu.no \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox