From mboxrd@z Thu Jan 1 00:00:00 1970 From: Fabien Salvi Subject: Re: Migrating RAID array to a different manufacturer controller Date: Tue, 18 Feb 2003 09:59:03 +0100 Sender: linux-scsi-owner@vger.kernel.org Message-ID: <3E51F5D7.2070507@cri74.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: List-Id: linux-scsi@vger.kernel.org To: Ryan Weiss Cc: linux-scsi@vger.kernel.org Ryan Weiss a =E9crit: > The stripe segment size, stripe order, the parameter block informatio= n > (depends on controller, some have, some don't) being compatible, and = any > offset before starting storage space. For the most part, I would cou= nt on > these things _not_ being compatible, and be happily surprised in any = case > where it is. >=20 > Your best bet is to get the same controller (and have it run the same= =20 > firmware rev), to pull data off. >=20 Ok, I will try this. Thanks for your advice, Ryan. --=20 =46abien SALVI Centre de Ressources Informatiques Archamps, France -- http://www.cri74.org PingOO GNU/linux distribution : http://www.pingoo.or= g - To unsubscribe from this list: send the line "unsubscribe linux-scsi" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html