From: Douglas Gilbert <dougg@torque.net>
To: linux-scsi@vger.kernel.org
Subject: sbp2 driver in 2.5.72
Date: Wed, 18 Jun 2003 22:46:20 +1000 [thread overview]
Message-ID: <3EF05F1C.6050001@torque.net> (raw)
It works on my hardware in 2.5.72 but when the sbp2 module
is loaded, there is a 20 second delay followed by this in
/var/log/messages:
ieee1394: sbp2: Error logging into SBP-2 device -
login timed-out
It immediately retries the login which works and then
all is well. Additionally the sbp2 driver doesn't like
the CONFIG_DEBUG_SPINLOCK_SLEEP option set in the kernel
build. Perhaps a spinlock is being held during that 20
second delay.
From dmesg:
ohci1394_0: SelfID received, but NodeID invalid (probably new bus reset
occurred): 0800FFC0
ieee1394: Node added: ID:BUS[0-00:1023] GUID[00043b000000071d]
ieee1394: Node 00:1023 changed to 01:1023
scsi2 : SCSI emulation for IEEE-1394 SBP-2 Devices
ieee1394: sbp2: Error logging into SBP-2 device - login timed-out
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: sbp2: Node[00:1023]: Max speed [S400] - Max payload [2048]
Vendor: QUANTUM Model: FIREBALL ST3.2A Rev:
Type: Direct-Access ANSI SCSI revision: 06
SCSI device sdb: 6306048 512-byte hdwr sectors (3229 MB)
sdb: cache data unavailable
sdb: assuming drive cache: write through
sdb: sdb1 sdb2
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Doug Gilbert
reply other threads:[~2003-06-18 12:32 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3EF05F1C.6050001@torque.net \
--to=dougg@torque.net \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox