From mboxrd@z Thu Jan 1 00:00:00 1970 From: Fabien Salvi Subject: Re: Status of qlogic tcp/ip (fc0) support Date: Mon, 15 Dec 2003 15:42:47 +0100 Sender: linux-scsi-owner@vger.kernel.org Message-ID: <3FDDC867.9040500@cri74.org> References: <1071483139.1433.3.camel@cala> <3FDD9D52.2060405@cri74.org> <3FDDC8FF.2090403@leosandbox.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from aravis.cur-archamps.fr ([195.202.0.99]:31942 "EHLO aravis.cur-archamps.fr") by vger.kernel.org with ESMTP id S263723AbTLOOmt (ORCPT ); Mon, 15 Dec 2003 09:42:49 -0500 List-Id: linux-scsi@vger.kernel.org To: r35157anc3 Cc: linux-scsi@vger.kernel.org Hello, I've CC the email to the list, other people could be interested.= =2E. Well, it wasn't very difficult. After building qla2?00.o with IP option and building qlaip, you just=20 have to load these 2 modules. Then, you can see a new network interface (see ifconfig -a). You can use it like any ethernet devices... You may also encounter difficulties related to FC connection between=20 your servers. In my test, I was using Qlogic Sanbox2 switch with=20 broadcasting activated. r35157anc3 a =E9crit: > Hello, >=20 > Do you know where I can get instructions on setting up ip for qla? I=20 > configured the qla ip drivers. I just can't figure out how to mount=20 > after setting it up. >=20 > &Leo(); >=20 > Fabien Salvi wrote: >=20 >> >> >> Mario Giammarco a =E9crit: >> >>> Hello, >>> I now have a qlogic 2200 card and I am trying tcp/ip support: >>> >>> - standard qlogicfc built in kernel seems to not support ip (I hear= d >>> there is a patch somewhere, is it right?) >>> >>> - qla drivers 6.00 of qlogic website should support it but I am not= able >>> to compile them with IP=3D1 option (I have tried on kernels 2.4.22 = 2.4.23) >> >> >> >> Hello, using qla2200 from qlogic is IMHO the good solution. >> I've already tested it a few months ago and it worked fine except ve= ry=20 >> poor performance (around 20MB/s with a Qlogic switch despite of no=20 >> load at all). >> >> You should send your compile errors... --=20 =46abien SALVI - To unsubscribe from this list: send the line "unsubscribe linux-scsi" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html