From mboxrd@z Thu Jan 1 00:00:00 1970 From: r35157anc3 Subject: Re: Status of qlogic tcp/ip (fc0) support Date: Mon, 15 Dec 2003 08:07:27 -0700 Sender: linux-scsi-owner@vger.kernel.org Message-ID: <3FDDCE2F.4030401@leosandbox.org> References: <1071483139.1433.3.camel@cala> <3FDD9D52.2060405@cri74.org> <3FDDC8FF.2090403@leosandbox.org> <3FDDC867.9040500@cri74.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from deagol.email.Arizona.EDU ([128.196.133.142]:35552 "EHLO smtpgate.email.arizona.edu") by vger.kernel.org with ESMTP id S263702AbTLOPBB (ORCPT ); Mon, 15 Dec 2003 10:01:01 -0500 In-Reply-To: <3FDDC867.9040500@cri74.org> List-Id: linux-scsi@vger.kernel.org To: Fabien Salvi Cc: linux-scsi@vger.kernel.org Thanks very much. I've made it as far as setting up the network devices= =2E=20 I now have fc0 network device and with an internal ip, but I can't=20 figure out how I am supposed to mount it? I can mount it over scsi? =20 What if I am trying to access the fc remotely? I guess I just don't=20 understand, but beyond setting up the qla2xip kernel drivers, the=20 documentation doesn't say much. &Leo(); =46abien Salvi wrote: > Hello, I've CC the email to the list, other people could be intereste= d... > > Well, it wasn't very difficult. > After building qla2?00.o with IP option and building qlaip, you just=20 > have to load these 2 modules. > Then, you can see a new network interface (see ifconfig -a). > You can use it like any ethernet devices... > > You may also encounter difficulties related to FC connection between=20 > your servers. In my test, I was using Qlogic Sanbox2 switch with=20 > broadcasting activated. > > > r35157anc3 a =E9crit: > >> Hello, >> >> Do you know where I can get instructions on setting up ip for qla? I= =20 >> configured the qla ip drivers. I just can't figure out how to mount=20 >> after setting it up. >> >> &Leo(); >> >> Fabien Salvi wrote: >> >>> >>> >>> Mario Giammarco a =E9crit: >>> >>>> Hello, >>>> I now have a qlogic 2200 card and I am trying tcp/ip support: >>>> >>>> - standard qlogicfc built in kernel seems to not support ip (I hea= rd >>>> there is a patch somewhere, is it right?) >>>> >>>> - qla drivers 6.00 of qlogic website should support it but I am no= t=20 >>>> able >>>> to compile them with IP=3D1 option (I have tried on kernels 2.4.22= =20 >>>> 2.4.23) >>> >>> >>> >>> >>> Hello, using qla2200 from qlogic is IMHO the good solution. >>> I've already tested it a few months ago and it worked fine except=20 >>> very poor performance (around 20MB/s with a Qlogic switch despite o= f=20 >>> no load at all). >>> >>> You should send your compile errors... >> > > > - To unsubscribe from this list: send the line "unsubscribe linux-scsi" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html