From mboxrd@z Thu Jan 1 00:00:00 1970 From: Fabien Salvi Subject: Re: Status of qlogic tcp/ip (fc0) support Date: Mon, 15 Dec 2003 17:15:05 +0100 Sender: linux-scsi-owner@vger.kernel.org Message-ID: <3FDDDE09.2040602@cri74.org> References: <1071483139.1433.3.camel@cala> <3FDD9D52.2060405@cri74.org> <3FDDC8FF.2090403@leosandbox.org> <3FDDC867.9040500@cri74.org> <3FDDCE2F.4030401@leosandbox.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from aravis.cur-archamps.fr ([195.202.0.99]:23506 "EHLO aravis.cur-archamps.fr") by vger.kernel.org with ESMTP id S263702AbTLOQPI (ORCPT ); Mon, 15 Dec 2003 11:15:08 -0500 List-Id: linux-scsi@vger.kernel.org To: r35157anc3 Cc: linux-scsi@vger.kernel.org You can communicate with other servers on the same SAN network also=20 using FC-IP. I don't understand what you mean with "mount" ? You have nothing to mount, it's a network interface like any other one=20 to use classic IP protocol. It has nothing to do with iSCSI or something like that... r35157anc3 a =E9crit: > Thanks very much. I've made it as far as setting up the network devic= es.=20 > I now have fc0 network device and with an internal ip, but I can't=20 > figure out how I am supposed to mount it? I can mount it over scsi? =20 > What if I am trying to access the fc remotely? I guess I just don't=20 > understand, but beyond setting up the qla2xip kernel drivers, the=20 > documentation doesn't say much. >=20 > &Leo(); >=20 >=20 > Fabien Salvi wrote: >=20 >> Hello, I've CC the email to the list, other people could be interest= ed... >> >> Well, it wasn't very difficult. >> After building qla2?00.o with IP option and building qlaip, you just= =20 >> have to load these 2 modules. >> Then, you can see a new network interface (see ifconfig -a). >> You can use it like any ethernet devices... >> >> You may also encounter difficulties related to FC connection between= =20 >> your servers. In my test, I was using Qlogic Sanbox2 switch with=20 >> broadcasting activated. >> >> >> r35157anc3 a =E9crit: >> >>> Hello, >>> >>> Do you know where I can get instructions on setting up ip for qla? = I=20 >>> configured the qla ip drivers. I just can't figure out how to mount= =20 >>> after setting it up. >>> >>> &Leo(); --=20 =46abien SALVI - To unsubscribe from this list: send the line "unsubscribe linux-scsi" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html