From: Joachim Feise <jfeise@ics.uci.edu>
To: linux-scsi@vger.kernel.org
Subject: PROBLEM: 2.6.3 hangs when writing to scsi-dvd
Date: Thu, 19 Feb 2004 11:47:04 -0800 [thread overview]
Message-ID: <403512B8.2060403@ics.uci.edu> (raw)
[1.] One line summary of the problem:
2.6.3 hangs when writing to scsi-dvd
[2.] Full description of the problem/report:
I have a DVD drive (BTC1004) connected via an IDE-SCSI bridge to
an Adaptec 29160 host adapter.
With kernel 2.6.3, I experience a complete system hang whenever I try
to record data on a DVD.
It requires a reboot.
[3.] Keywords (i.e., modules, networking, kernel):
SCSI
[4.] Kernel version (from /proc/version):
Linux version 2.6.3 (root@pv105234) (gcc version 3.2.2) #1 Wed Feb 18 04:26:46 PST 2004
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
None.
[6.] A small shell script or example program which triggers the
problem (if possible)
growisofs -Z /dev/sr1 -R -J tmpdir/files
Where /dev/sr1 is the DVD device
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
Linux pv105234 2.6.3 #1 Wed Feb 18 04:26:46 PST 2004 i686 unknown
Gnu C 3.2.2
Gnu make 3.80
util-linux 2.11z
mount 2.11z
module-init-tools 0.9.13
e2fsprogs 1.32
jfsutils 1.1.1
reiserfsprogs 3.6.4
xfsprogs 2.3.5
pcmcia-cs 3.2.4
quota-tools 3.08.
PPP 2.4.2
nfs-utils 1.0.1
Linux C Library 2.3.1
Dynamic linker (ldd) 2.3.1
Linux C++ Library 5.0.2
Procps 3.1.6
Net-tools 1.60
Kbd 1.08
Sh-utils 2.0
Modules Loaded snd_seq_midi snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss
softdog ipv6 ohci_hcd ehci_hcd snd_cs46xx snd_rawmidi snd_seq_device snd_ac97_codec snd_pcm
snd_timer snd soundcore gameport snd_page_alloc i2c_core ide_scsi ppp_mppe ppp_deflate ppp_generic
slhc usb_storage
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 6
model name : Celeron (Mendocino)
stepping : 0
cpu MHz : 334.143
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr
bogomips : 659.45
[7.3.] Module information (from /proc/modules):
snd_seq_midi 8384 0 - Live 0xd3d83000
snd_seq_oss 35104 0 - Live 0xd3dea000
snd_seq_midi_event 7744 2 snd_seq_midi,snd_seq_oss, Live 0xd3cec000
snd_seq 56592 5 snd_seq_midi,snd_seq_oss,snd_seq_midi_event, Live 0xd3dbe000
snd_pcm_oss 54564 1 - Live 0xd3dcf000
snd_mixer_oss 20096 2 snd_pcm_oss, Live 0xd3d7d000
softdog 4808 1 - Live 0xd3d35000
ipv6 258272 14 - Live 0xd3e08000
ohci_hcd 19328 0 - Live 0xd3d3c000
ehci_hcd 25888 0 - Live 0xd3d6e000
snd_cs46xx 90956 2 - Live 0xd3d88000
snd_rawmidi 25216 2 snd_seq_midi,snd_cs46xx, Live 0xd3d25000
snd_seq_device 8068 4 snd_seq_midi,snd_seq_oss,snd_seq,snd_rawmidi, Live 0xd3ce6000
snd_ac97_codec 63588 1 snd_cs46xx, Live 0xd3d5d000
snd_pcm 101856 2 snd_pcm_oss,snd_cs46xx, Live 0xd3d43000
snd_timer 26272 2 snd_seq,snd_pcm, Live 0xd3d0d000
snd 55492 12
snd_seq_midi,snd_seq_oss,snd_seq_midi_event,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_cs46xx,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer,
Live 0xd3d16000
soundcore 10176 3 snd, Live 0xd3d00000
gameport 4736 1 snd_cs46xx, Live 0xd3ce9000
snd_page_alloc 12228 2 snd_cs46xx,snd_pcm, Live 0xd3cf7000
i2c_core 23488 0 - Live 0xd3cdf000
ide_scsi 15268 0 - Live 0xd3cda000
ppp_mppe 14304 0 - Live 0xd3cd5000
ppp_deflate 6144 0 - Live 0xd3cc1000
ppp_generic 31528 2 ppp_mppe,ppp_deflate, Live 0xd3ccc000
slhc 7296 1 ppp_generic, Live 0xd3cbe000
usb_storage 68064 0 - Live 0xd3b56000
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
cat /proc/ioports
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000cb000-000d3fff : Extension ROM
000f0000-000fffff : System ROM
00100000-11ffffff : System RAM
00100000-003c88f2 : Kernel code
003c88f3-004db8ff : Kernel data
c056f000-c096f000 : Bigphysarea
c7900000-cf9fffff : PCI Bus #01
c8000000-cbffffff : 0000:01:00.0
c8000000-c8ffffff : vesafb
d0000000-d3ffffff : 0000:00:00.0
d7b00000-efcfffff : PCI Bus #01
e0000000-e3ffffff : 0000:01:00.0
e4000000-e7ffffff : 0000:01:00.0
e8000000-ebffffff : 0000:01:00.0
efc80000-efcfffff : 0000:01:00.0
efe00000-efefffff : 0000:00:09.0
efe00000-efe02fff : CS46xx_BA1_data0
efe10000-efe137ff : CS46xx_BA1_data1
efe20000-efe26fff : CS46xx_BA1_pmem
efe30000-efe300ff : CS46xx_BA1_reg
efffc000-efffcfff : 0000:00:09.0
efffc000-efffcfff : CS46xx_BA0
efffee00-efffeeff : 0000:00:0d.0
efffee00-efffeeff : 8139too
efffef00-efffefff : 0000:00:0f.0
efffef00-efffefff : 8139too
effff000-efffffff : 0000:00:11.0
effff000-efffffff : aic7xxx
ffff0000-ffffffff : reserved
cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000cb000-000d3fff : Extension ROM
000f0000-000fffff : System ROM
00100000-11ffffff : System RAM
00100000-003c88f2 : Kernel code
003c88f3-004db8ff : Kernel data
c056f000-c096f000 : Bigphysarea
c7900000-cf9fffff : PCI Bus #01
c8000000-cbffffff : 0000:01:00.0
c8000000-c8ffffff : vesafb
d0000000-d3ffffff : 0000:00:00.0
d7b00000-efcfffff : PCI Bus #01
e0000000-e3ffffff : 0000:01:00.0
e4000000-e7ffffff : 0000:01:00.0
e8000000-ebffffff : 0000:01:00.0
efc80000-efcfffff : 0000:01:00.0
efe00000-efefffff : 0000:00:09.0
efe00000-efe02fff : CS46xx_BA1_data0
efe10000-efe137ff : CS46xx_BA1_data1
efe20000-efe26fff : CS46xx_BA1_pmem
efe30000-efe300ff : CS46xx_BA1_reg
efffc000-efffcfff : 0000:00:09.0
efffc000-efffcfff : CS46xx_BA0
efffee00-efffeeff : 0000:00:0d.0
efffee00-efffeeff : 8139too
efffef00-efffefff : 0000:00:0f.0
efffef00-efffefff : 8139too
effff000-efffffff : 0000:00:11.0
effff000-efffffff : aic7xxx
ffff0000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Intel Corp. 440LX/EX - 82443LX/EX Host bridge (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 64
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corp. 440LX/EX - 82443LX/EX AGP bridge (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: d7b00000-efcfffff
Prefetchable memory behind bridge: c7900000-cf9fffff
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 4: I/O ports at ffa0 [size=16]
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at d800 [size=32]
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:09.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio
Accelerator] (rev 01)
Subsystem: Voyetra Technologies: Unknown device 3357
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 6000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at efffc000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at efe00000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: D-Link System Inc DFE-538TX
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at da00 [size=256]
Region 1: Memory at efffee00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
Subsystem: D-Link System Inc DFE-530TX+ 10/100 Ethernet Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at dc00 [size=256]
Region 1: Memory at efffef00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02)
Subsystem: Adaptec 29160 Ultra160 SCSI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (10000ns min, 6250ns max), cache line size 08
Interrupt: pin A routed to IRQ 9
BIST result: 00
Region 0: I/O ports at de00 [disabled] [size=256]
Region 1: Memory at effff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at effc0000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:13.0 Class 6120: Unknown device 0002:0400 (rev de) (prog-if 11)
Subsystem: Unknown device 0008:0000
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Interrupt: pin A routed to IRQ 0
Region 2: Memory at <unassigned> (32-bit, prefetchable) [disabled]
Region 3: Memory at <unassigned> (32-bit, prefetchable) [disabled]
01:00.0 VGA compatible controller: S3 Inc. 86C410 Savage 2000 (rev 02) (prog-if 00 [VGA])
Subsystem: S3 Inc. 86C410 Savage 2000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (3000ns min, 4000ns max), cache line size 08
Interrupt: pin A routed to IRQ 0
Region 0: Memory at efc80000 (32-bit, non-prefetchable) [size=512K]
Region 1: Memory at c8000000 (32-bit, prefetchable) [size=64M]
Region 2: Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
Region 3: Memory at e4000000 (32-bit, non-prefetchable) [size=64M]
Region 4: Memory at e0000000 (32-bit, non-prefetchable) [size=64M]
Expansion ROM at efc70000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
[7.6.] SCSI information (from /proc/scsi/scsi)
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: QUANTUM Model: ATLAS10K3_36_WLS Rev: 020W
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: YAMAHA Model: CRW-F1S Rev: 1.0c
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: DVDRW Model: IDE1004 Rev: 0048
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 01
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 02
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 03
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 04
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: Model: USB DISK Rev: 1.17
Type: Direct-Access ANSI SCSI revision: 02
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
[X.] Other notes, patches, fixes, workarounds:
It worked fine with 2.6.2.
next reply other threads:[~2004-02-19 19:48 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-19 19:47 Joachim Feise [this message]
2004-02-20 22:13 ` PROBLEM: 2.6.3 hangs when writing to scsi-dvd Joachim Feise
2004-02-23 11:52 ` Kai Makisara
2004-02-23 13:26 ` Jens Axboe
2004-02-23 14:22 ` Kai Makisara
2004-02-23 14:25 ` Jens Axboe
2004-02-23 18:21 ` Frank Pieczynski
2004-02-23 19:05 ` Jens Axboe
2004-02-24 7:18 ` Joachim Feise
2004-02-23 13:46 ` mike
-- strict thread matches above, loose matches on Subject: below --
2004-02-21 10:25 Michael Guntsche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=403512B8.2060403@ics.uci.edu \
--to=jfeise@ics.uci.edu \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox