public inbox for linux-scsi@vger.kernel.org
 help / color / mirror / Atom feed
From: Stanley Chu <stanley.chu@mediatek.com>
To: SEO HOYOUNG <hy50.seo@samsung.com>, <linux-scsi@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <alim.akhtar@samsung.com>,
	<avri.altman@wdc.com>, <jejb@linux.ibm.com>,
	<martin.petersen@oracle.com>, <beanhuo@micron.com>,
	<asutoshd@codeaurora.org>, <cang@codeaurora.org>,
	<bvanassche@acm.org>, <bhoon95.kim@samsung.com>,
	<kwmad.kim@samsung.com>
Cc: kernel test robot <lkp@intel.com>, <peter.wang@mediatek.com>
Subject: Re: [PATCH v2] scsi: ufs: disable auto hibern8 while entering suspend
Date: Wed, 26 Jan 2022 09:22:28 +0800	[thread overview]
Message-ID: <40986ecb6c81812a1e1ab24d93e46eda75974c4e.camel@mediatek.com> (raw)
In-Reply-To: <20220124180637.160524-1-hy50.seo@samsung.com>

Hi Hoyoung,

On Tue, 2022-01-25 at 03:06 +0900, SEO HOYOUNG wrote:
> v1-> v2: fixed no previous prototype warning
> Reported-by: kernel test robot <lkp@intel.com>
> 
> All warnings (new ones prefixed by >>):
> > > drivers/scsi/ufs/ufshcd.c:4207:6: warning: no previous prototype 
> 
> for 'ufshcd_auto_hibern8_disable' [-Wmissing-prototypes]
> 4207 | void ufshcd_auto_hibern8_disable(struct ufs_hba *hba)
> 
> If using auto hibern8 mode, need to disable auto hibern8 while
> entering suspend.
> When using auto hibern8 mode, it does not seem right to send a uic
> command

The UFSHCI spec does not mention the above rule.
Why would you need to disable AH8 before using UIC command to enter H8?

> for entry into hibern8 in the next
> line(ufshcd_lik_state_transition(..))
> It seem right to send after disable auto hibern8.
> 
> In addition, if the auto hibern8 mode supported, it is enabled in
> resume.
> So it seems that it will be paired only when auto hibern8 is disabled
> while entering suspend.
> 
> Signed-off-by: SEO HOYOUNG <hy50.seo@samsung.com>
> ---
>  drivers/scsi/ufs/ufshcd.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 460d2b440d2e..a6edbbd8ca2c 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -254,6 +254,7 @@ static void
> ufshcd_wb_toggle_flush_during_h8(struct ufs_hba *hba, bool set);
>  static inline void ufshcd_wb_toggle_flush(struct ufs_hba *hba, bool
> enable);
>  static void ufshcd_hba_vreg_set_lpm(struct ufs_hba *hba);
>  static void ufshcd_hba_vreg_set_hpm(struct ufs_hba *hba);
> +static void ufshcd_auto_hibern8_disable(struct ufs_hba *hba);
>  
>  static inline void ufshcd_enable_irq(struct ufs_hba *hba)
>  {
> @@ -4204,6 +4205,18 @@ void ufshcd_auto_hibern8_update(struct ufs_hba
> *hba, u32 ahit)
>  }
>  EXPORT_SYMBOL_GPL(ufshcd_auto_hibern8_update);
>  
> +static void ufshcd_auto_hibern8_disable(struct ufs_hba *hba)
> +{
> +	unsigned long flags;
> +
> +	if (!ufshcd_is_auto_hibern8_supported(hba))
> +		return;
> +
> +	spin_lock_irqsave(hba->host->host_lock, flags);
> +	ufshcd_writel(hba, 0, REG_AUTO_HIBERNATE_IDLE_TIMER);
> +	spin_unlock_irqrestore(hba->host->host_lock, flags);
> +}
> +
>  void ufshcd_auto_hibern8_enable(struct ufs_hba *hba)
>  {
>  	unsigned long flags;
> @@ -8925,6 +8938,7 @@ static int __ufshcd_wl_suspend(struct ufs_hba
> *hba, enum ufs_pm_op pm_op)
>  	 * with the link off, so do not check for bkops.
>  	 */
>  	check_for_bkops = !ufshcd_is_ufs_dev_deepsleep(hba);
> +	ufshcd_auto_hibern8_disable(hba);
>  	ret = ufshcd_link_state_transition(hba, req_link_state,
> check_for_bkops);
>  	if (ret)
>  		goto set_dev_active;


  reply	other threads:[~2022-01-26  1:22 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20220125062155epcas2p15da28303164091b1bf5a00dcf99fe59b@epcas2p1.samsung.com>
2022-01-24 18:06 ` [PATCH v2] scsi: ufs: disable auto hibern8 while entering suspend SEO HOYOUNG
2022-01-26  1:22   ` Stanley Chu [this message]
2022-01-26  5:34     ` 서호영
2022-02-03  0:12     ` Hoyoung SEO
2022-02-03  6:44       ` Avri Altman
2022-02-03  6:50       ` Alim Akhtar
2022-02-03 16:53         ` Bart Van Assche

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=40986ecb6c81812a1e1ab24d93e46eda75974c4e.camel@mediatek.com \
    --to=stanley.chu@mediatek.com \
    --cc=alim.akhtar@samsung.com \
    --cc=asutoshd@codeaurora.org \
    --cc=avri.altman@wdc.com \
    --cc=beanhuo@micron.com \
    --cc=bhoon95.kim@samsung.com \
    --cc=bvanassche@acm.org \
    --cc=cang@codeaurora.org \
    --cc=hy50.seo@samsung.com \
    --cc=jejb@linux.ibm.com \
    --cc=kwmad.kim@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=lkp@intel.com \
    --cc=martin.petersen@oracle.com \
    --cc=peter.wang@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox