From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jeff Garzik Subject: Re: Linux version 2.6.6 // libata 1.02 // sata_promise version 0.92 // problem with Promise FastTrack S150 SX4 Date: Mon, 17 May 2004 14:06:33 -0400 Sender: linux-scsi-owner@vger.kernel.org Message-ID: <40A8FF29.7090701@pobox.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from parcelfarce.linux.theplanet.co.uk ([195.92.249.252]:29073 "EHLO www.linux.org.uk") by vger.kernel.org with ESMTP id S262003AbUEQSGp (ORCPT ); Mon, 17 May 2004 14:06:45 -0400 In-Reply-To: List-Id: linux-scsi@vger.kernel.org To: Nicholas Cc: linux-scsi@vger.kernel.org Nicholas wrote: > Hello, > I have compiled SCSI and libata support directly into a 2.6.6 kernel, in > order to try and get the Linux kernel to recognise a two drive RAID0 array > attached to a FastTrack S150 SX4. Unfortunately the drives are seen as two > seperate drives, and the single RAID 0 array appears not to be detected. I > am assuming this is not normal. The RAID0 array works fine under W2k. I have This is normal. Promise proprietary RAID is not supported under Linux, by the kernel drivers. Jeff