From: Jamie Clark <jamie@zeroth.org>
To: Andrew Vasquez <praka@pobox.com>
Cc: linux-scsi@vger.kernel.org
Subject: Re: qla2xxx driver/firmware versions & thermal stability
Date: Tue, 17 Aug 2004 07:41:27 +0800 [thread overview]
Message-ID: <41214627.8020408@zeroth.org> (raw)
In-Reply-To: <20040816211943.GA16524@praka.san.rr.com>
Andrew Vasquez wrote:
>Could you report your findings to QLogic tech-support
>(www.qlogic.com/support), they'll be able to assist in
>troubleshooting.
>
>
>
:) Been there recently. In a nutshell: "it shouldn't happen,
but that's quite an old driver, perhaps you could try
upgrading"
Forgive me for not taking the advice immediately, but if
you knew how long I'd been looking at this, how much
equipment isolated/replaced and how many versions
of the qla driver I build/tried *before* 6.04...
When my colleague raised this on lkml 12-18months
ago (before we knew it was heat related) he had an
off-list reply from someone who had spent a long
time chasing the same error - and traced it to heat
sensitivity (within operating spec).
I originially concluded that it was perhaps a bad batch
of cards - hence replacing all the 2300s with 2340s.
I may eventually replace the driver as I have almost
run out of options - but I was hoping for something
a little more scientific after my past driver upgrades.
prev parent reply other threads:[~2004-08-16 23:41 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-08-16 8:07 qla2xxx driver/firmware versions & thermal stability Jamie Clark
2004-08-16 21:19 ` Andrew Vasquez
2004-08-16 23:41 ` Jamie Clark [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41214627.8020408@zeroth.org \
--to=jamie@zeroth.org \
--cc=linux-scsi@vger.kernel.org \
--cc=praka@pobox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).