From: Mike Christie <michaelc@cs.wisc.edu>
To: linux-scsi@vger.kernel.org
Subject: [PATCH 1/10][RFC] linux-iscsi driver
Date: Mon, 10 Jan 2005 14:56:45 -0800 [thread overview]
Message-ID: <41E3082D.1@cs.wisc.edu> (raw)
[-- Attachment #1: Type: text/plain, Size: 25 bytes --]
Add Makefile and Kconfig
[-- Attachment #2: 01-kconfig-mk.patch --]
[-- Type: text/x-patch, Size: 3055 bytes --]
diff -Naurp scsi-misc-2.6.orig/drivers/scsi/iscsi-sfnet/Kconfig scsi-misc-2.6.test/drivers/scsi/iscsi-sfnet/Kconfig
--- scsi-misc-2.6.orig/drivers/scsi/iscsi-sfnet/Kconfig 1969-12-31 16:00:00.000000000 -0800
+++ scsi-misc-2.6.test/drivers/scsi/iscsi-sfnet/Kconfig 2005-01-05 01:15:07.712291051 -0800
@@ -0,0 +1,25 @@
+config SCSI_ISCSI_SFNET
+ tristate "Software iSCSI support"
+ depends on SCSI && INET
+ select SCSI_ISCSI_ATTRS
+ select CRYPTO
+ select CRYPTO_MD5
+ select CRYPTO_CRC32C
+ ---help---
+ To compile this driver as a module, choose M here: the
+ module will be called iscsi_sfnet.
+
+ The iSCSI Driver provides a host with the ability to access
+ storage through an IP network. The driver uses the iSCSI
+ protocol to transport SCSI requests and responses over an IP
+ network between the host (the "initiator") and "targets".
+ Architecturally, the iSCSI driver combines with the host's
+ TCP/IP stack, network drivers, and Network Interface Card
+ (NIC) to provide the same functions as a SCSI or a Fibre
+ Channel (FC) adapter driver with a Host Bus Adapter (HBA).
+
+ The userspace component needed to initialize the driver,
+ documentation, and sample configuration files can be found
+ here:
+
+ http://linux-iscsi.sourceforge.net
diff -Naurp scsi-misc-2.6.orig/drivers/scsi/iscsi-sfnet/Makefile scsi-misc-2.6.test/drivers/scsi/iscsi-sfnet/Makefile
--- scsi-misc-2.6.orig/drivers/scsi/iscsi-sfnet/Makefile 1969-12-31 16:00:00.000000000 -0800
+++ scsi-misc-2.6.test/drivers/scsi/iscsi-sfnet/Makefile 2005-01-05 01:15:18.661906339 -0800
@@ -0,0 +1,16 @@
+#
+# Makefile for Software iSCSI driver
+#
+obj-$(CONFIG_SCSI_ISCSI_SFNET) += iscsi_sfnet.o
+iscsi_sfnet-objs := iscsi-initiator.o
+iscsi_sfnet-objs += iscsi-attr.o \
+ iscsi-session.o \
+ iscsi-task.o \
+ iscsi-portal.o \
+ iscsi-ioctl.o \
+ iscsi-network.o \
+ iscsi-recv-pdu.o \
+ iscsi-xmit-pdu.o \
+ iscsi-auth.o \
+ iscsi-login.o \
+ iscsi-auth-client.o
diff -Naurp scsi-misc-2.6.orig/drivers/scsi/Kconfig scsi-misc-2.6.test/drivers/scsi/Kconfig
--- scsi-misc-2.6.orig/drivers/scsi/Kconfig 2005-01-05 01:13:32.951273657 -0800
+++ scsi-misc-2.6.test/drivers/scsi/Kconfig 2005-01-05 01:14:37.771077311 -0800
@@ -854,6 +854,8 @@ config SCSI_PPA
To compile this driver as a module, choose M here: the
module will be called ppa.
+source "drivers/scsi/iscsi-sfnet/Kconfig"
+
config SCSI_IMM
tristate "IOMEGA parallel port (imm - newer drives)"
depends on SCSI && PARPORT
diff -Naurp scsi-misc-2.6.orig/drivers/scsi/Makefile scsi-misc-2.6.test/drivers/scsi/Makefile
--- scsi-misc-2.6.orig/drivers/scsi/Makefile 2005-01-05 01:13:33.221239510 -0800
+++ scsi-misc-2.6.test/drivers/scsi/Makefile 2005-01-05 01:14:33.208654238 -0800
@@ -132,6 +132,7 @@ obj-$(CONFIG_SCSI_SATA_SIS) += libata.o
obj-$(CONFIG_SCSI_SATA_SX4) += libata.o sata_sx4.o
obj-$(CONFIG_SCSI_SATA_NV) += libata.o sata_nv.o
obj-$(CONFIG_SCSI_SATA_ULI) += libata.o sata_uli.o
+obj-$(CONFIG_SCSI_ISCSI_SFNET) += iscsi-sfnet/
obj-$(CONFIG_ARM) += arm/
reply other threads:[~2005-01-10 22:56 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41E3082D.1@cs.wisc.edu \
--to=michaelc@cs.wisc.edu \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox