From mboxrd@z Thu Jan 1 00:00:00 1970 From: Atul Srinivasan Subject: kernel 2.6.11.2 / megaraid 2.20.4.5 and /proc question Date: Fri, 11 Mar 2005 16:32:15 -0800 Message-ID: <4232388F.7070505@sierra-da.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Received: from [209.10.211.37] ([209.10.211.37]:50201 "EHLO localhost.localdomain") by vger.kernel.org with ESMTP id S261526AbVCLAcQ (ORCPT ); Fri, 11 Mar 2005 19:32:16 -0500 Received: from [127.0.0.1] (localhost [127.0.0.1]) by localhost.localdomain (8.12.8/8.12.8) with ESMTP id j2C0WFup011832 for ; Fri, 11 Mar 2005 16:32:16 -0800 Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: linux-scsi@vger.kernel.org Hi, I've just build kernel version 2.6.11.2 with the new lsi megaraiddrivers compiled into the kernel. I think the driver version is 2.20.4.5. I used to be using a 2.6.7 kernel with an older version of the drivers. 2.00.3. I'm using a MegaRAID SATA 150-6 card. With the 2.6.7 kernel there used to be information in /proc/megaraid. I do not see the same information using the 2.6.11.2 kernel. Is there anything in /proc using the 2.6.11.2 kernel setup ? If not there, then anywhere else ? Also, where might I find information on to forward errors detected bythe adapter. e.g send mail to an account Apologies in advance if any of the above questions are not appropriatefor this group, or if they are covered in some doc I have not read. Thanks, Atul