I am having a problem getting my Dell Precision 620 with dual PIII 933's 
and 512 Mb memory to boot 2.6.12-rc3. The problem seems to be the 
aic7899. The aic7899 driver is compiled into the kernel along with the 
rest of scsi. I have had to compile in the scsi for every version of 
2.6.12-x, but they have all worked until 2.6.12-rc3. I am attaching the 
output from lspci, the serial console log and the config file. If there 
is anything else that I can provide, test, etc. I will be glad to do so.


-- 
    kr

[kr@porky ~]$ /sbin/lspci
00:00.0 Host bridge: Intel Corp. 82840 840 (Carmel) Chipset Host Bridge 
(Hub A)(rev 02)
00:01.0 PCI bridge: Intel Corp. 82840 840 (Carmel) Chipset AGP Bridge 
(rev 02)
00:02.0 PCI bridge: Intel Corp. 82840 840 (Carmel) Chipset PCI Bridge 
(Hub B) (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02)
00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02)
00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02)
00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation NV10GL [Quadro] 
(rev 10)
02:1f.0 PCI bridge: Intel Corp. 82806AA PCI64 Hub PCI Bridge (rev 03)
03:00.0 PIC: Intel Corp. 82806AA PCI64 Hub Advanced Programmable 
Interrupt Controller (rev 01)
04:04.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 
[CrystalClear SoundFusion Audio Accelerator] (rev 01)
04:05.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
04:05.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
04:0a.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 
[FasterNet] (rev 20)