Linux version 2.6.12-rc3 (kr@porky.cybersoft.int) (gcc version 3.4.3 20050227 (Red Hat 3.4.3-22.fc3)) #6 SMP Thu Apr 28 20:04:26 CDT 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff9e000 (usable) BIOS-e820: 000000001ff9e000 - 0000000020000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 511MB LOWMEM available. found SMP MP-table at 000fe710 DMI 2.3 present. ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 17 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 6:8 APIC version 17 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: DELL Product ID: WS 620 APIC at: 0xFEE00000 I/O APIC #2 Version 32 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000) Built 1 zonelists Kernel command line: ro root=LABEL=/ console=ttyS0,38400 console=tty0 nmi_watchdog=1 Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 931.119 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 514224k/523896k available (2074k kernel code, 9116k reserved, 1124k data, 228k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: L1 I cache: 16K<7>spurious 8259A interrupt: IRQ7. , L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel Pentium III (Coppermine) stepping 06 Booting processor 1/1 eip 2000 Initializing CPU#1 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Pentium III (Coppermine) stepping 06 Total of 2 processors activated (3698.68 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=0 testing NMI watchdog ... CPU#1: NMI appears to be stuck! checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs checking if image is initramfs... it is Freeing initrd memory: 304k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfc03e, last bus=4 PCI: Using configuration type 1 mtrr: v2.0 (20020519) Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:1e.0 PCI: Using IRQ router PIIX/ICH [8086/2410] at 0000:00:1f.0 PCI->APIC IRQ transform: 0000:00:1f.2[D] -> IRQ 19 PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 17 PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16 PCI->APIC IRQ transform: 0000:04:04.0[A] -> IRQ 16 PCI->APIC IRQ transform: 0000:04:05.0[A] -> IRQ 17 PCI->APIC IRQ transform: 0000:04:05.1[B] -> IRQ 18 PCI->APIC IRQ transform: 0000:04:0a.0[A] -> IRQ 18 PCI: Failed to allocate mem resource #0:1000@0 for 0000:03:00.0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API nvidiafb: nVidia device/chipset 10DE0103 nvidiafb: nVidia Corporation NV10GL [Quadro] nvidiafb: HW is currently programmed for CRT nvidiafb: Using CRT on CRTC 0 nvidiafb: MTRR set to ON nvidiafb: PCI nVidia NV10 framebuffer (64MB @ 0xE8000000) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH: IDE controller at PCI slot 0000:00:1f.1 ICH: chipset revision 2 ICH: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: SAMSUNG CD-R/RW SW-248F, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: Lite-On LTN483S 48x Max, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs Vendor: QUANTUM Model: ATLAS10K2-TY092L Rev: DA40 Type: Direct-Access ANSI SCSI revision: 03 scsi0:A:0:0: Tagged Queuing enabled. Depth 32 target0:0:0: Beginning Domain Validation (scsi0:A:0): 6.600MB/s transfers (16bit) (scsi0:A:0): 80.000MB/s transfers (40.000MHz, offset 127, 16bit) target0:0:0: Ending Domain Validation scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs Vendor: SEAGATE Model: SX118273LC Rev: 6679 Type: Direct-Access ANSI SCSI revision: 02 scsi1:A:0:0: Tagged Queuing enabled. Depth 32 target1:0:0: Beginning Domain Validation (scsi1:A:0): 6.600MB/s transfers (16bit) (scsi1:A:0:0): parity error detected in Data-in phase. SEQADDR(0x6a) SCSIRATE(0x80) Unable to handle kernel NULL pointer dereference at virtual address 00000104 printing eip: c02786a6 *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00010006 (2.6.12-rc3) EIP is at ahc_send_async+0xf6/0x2d0 eax: 00000100 ebx: ffffff00 ecx: 00000000 edx: 00000000 esi: 00000000 edi: dff7ca00 ebp: c0421d9c esp: c0421d14 ds: 007b es: 007b ss: 0068 Process swapper (pid: 0, threadinfo=c0420000 task=c0351c00) Stack: 00000000 00000000 00000320 00000000 00000000 dff7ca00 00000100 c0421d40 00000050 00000000 00000000 ffffffff c0421dd4 c027861b dfceac00 ffffffbf 00000000 dff7ca98 00000000 dff7ca00 c0421d80 c0262b1f dff7ca00 dff7ca90 Call Trace: [] show_stack+0x7f/0xa0 [] show_registers+0x163/0x1e0 [] die+0x101/0x190 [] do_page_fault+0x472/0x6b9 [] error_code+0x4f/0x54 [] ahc_set_width+0x109/0x1a0 [] ahc_reset_channel+0x301/0x530 [] ahc_handle_scsiint+0x180/0xf80 [] ahc_linux_isr+0x218/0x2e0 [] handle_IRQ_event+0x3e/0x90 [] __do_IRQ+0xd7/0x160 [] do_IRQ+0x26/0x40 [] common_interrupt+0x1a/0x20 [] cpu_idle+0x4e/0x90 [] start_kernel+0x1af/0x1f0 [] 0xc010020e Code: 14 01 00 00 0f b6 97 3b 01 00 00 80 f9 42 8d 42 08 0f 44 d0 8b 8c 97 c0 00 00 00 8d 04 f6 8d 04 46 01 c8 05 00 01 00 00 89 45 90 <0f> b6 48 04 3a 48 0a 0f 84 ec 00 00 00 a1 0c c5 47 c0 85 c0 74 <0>Kernel panic - not syncing: Fatal exception in interrupt