[PATCH 5/4] aic79xx: remove the last vestiges of the runq

[Jeff Garzik <jgarzik@pobox.com>]

[-- Attachment #1: Type: text/plain, Size: 137 bytes --]


Next patch in the aic series...  this one should have been posted with 
the last 4-part patch series.

Do not apply, only for review.



[-- Attachment #2: patch --]
[-- Type: text/plain, Size: 2138 bytes --]

author Jeff Garzik <jgarzik@pobox.com> Sun, 29 May 2005 12:22:46 -0400
committer Jeff Garzik <jgarzik@pobox.com> Sun, 29 May 2005 12:22:46 -0400

[SCSI] aic79xx: remove the last vestiges of the runq

This was rendered obsolete by the busyq removal; remove some of the last
remnants of its presence.

diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -1796,7 +1796,6 @@ ahd_platform_alloc(struct ahd_softc *ahd
 		return (ENOMEM);
 	memset(ahd->platform_data, 0, sizeof(struct ahd_platform_data));
 	TAILQ_INIT(&ahd->platform_data->completeq);
-	TAILQ_INIT(&ahd->platform_data->device_runq);
 	ahd->platform_data->irq = AHD_LINUX_NOIRQ;
 	ahd->platform_data->hw_dma_mask = 0xFFFFFFFF;
 	ahd_lockinit(ahd);
@@ -3923,10 +3922,6 @@ ahd_done(struct ahd_softc *ahd, struct s
 	    && dev->active == 0
 	    && (dev->flags & AHD_DEV_TIMER_ACTIVE) == 0)
 		ahd_linux_free_device(ahd, dev);
-	else if ((dev->flags & AHD_DEV_ON_RUN_LIST) == 0) {
-		TAILQ_INSERT_TAIL(&ahd->platform_data->device_runq, dev, links);
-		dev->flags |= AHD_DEV_ON_RUN_LIST;
-	}
 
 	if ((scb->flags & SCB_RECOVERY_SCB) != 0) {
 		printf("Recovery SCB completes\n");
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.h b/drivers/scsi/aic7xxx/aic79xx_osm.h
--- a/drivers/scsi/aic7xxx/aic79xx_osm.h
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.h
@@ -315,7 +315,6 @@ typedef enum {
 	AHD_DEV_UNCONFIGURED	 = 0x01,
 	AHD_DEV_FREEZE_TIL_EMPTY = 0x02, /* Freeze queue until active == 0 */
 	AHD_DEV_TIMER_ACTIVE	 = 0x04, /* Our timer is active */
-	AHD_DEV_ON_RUN_LIST	 = 0x08, /* Queued to be run later */
 	AHD_DEV_Q_BASIC		 = 0x10, /* Allow basic device queuing */
 	AHD_DEV_Q_TAGGED	 = 0x20, /* Allow full SCSI2 command queueing */
 	AHD_DEV_PERIODIC_OTAG	 = 0x40, /* Send OTAG to prevent starvation */
@@ -503,7 +502,6 @@ struct ahd_platform_data {
 	 * Fields accessed from interrupt context.
 	 */
 	struct ahd_linux_target *targets[AHD_NUM_TARGETS]; 
-	TAILQ_HEAD(, ahd_linux_device) device_runq;
 	struct ahd_completeq	 completeq;
 
 	spinlock_t		 spin_lock;