From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hannes Reinecke Subject: Re: [RFT][PATCH] aic79xx: remove busyq Date: Mon, 13 Jun 2005 15:56:25 +0200 Message-ID: <42AD9089.5080006@suse.de> References: <20050529074620.GA26151@havoc.gtf.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from ns1.suse.de ([195.135.220.2]:2779 "EHLO mx1.suse.de") by vger.kernel.org with ESMTP id S261575AbVFMN40 (ORCPT ); Mon, 13 Jun 2005 09:56:26 -0400 In-Reply-To: <20050529074620.GA26151@havoc.gtf.org> Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: Jeff Garzik Cc: linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org Jeff Garzik wrote: > Can anyone with aic79xx hardware give me a simple "it works" > or "this breaks things" answer, for the patch below? >=20 > This changes the aic79xx driver to use the standard Linux SCSI queuei= ng > code, rather than its own. After applying this patch, NO behavior > changes should be seen. >=20 > The patch is against 2.6.12-rc5, but probably applies OK to recent 2.= 6.x > kernels. >=20 Hmm. Does not quite work here: scsi0: Starting DV scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11 aic7902: Ultra320 Wide Channel A, SCSI Id=3D7, PCI 33 or 66Mhz, 512 SCBs In DV Thread scsi0: Beginning Domain Validation scsi0:A:0:0: Performing DV scsi0:2223: Going from state 0 to state 1 scsi0:A:0:0: Sending INQ scsi0: Timeout while doing DV command 12. And from there all hell breaks loose. It looks as if it simply refuses to send any commands ... Investigating. Cheers, Hannes --=20 Dr. Hannes Reinecke hare@suse.de SuSE Linux AG S390 & zSeries Maxfeldstra=DFe 5 +49 911 74053 688 90409 N=FCrnberg http://www.suse.de - To unsubscribe from this list: send the line "unsubscribe linux-scsi" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html