From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pim Zandbergen Subject: oops reading from Nakamichi SCSI CD changer Date: Tue, 20 Dec 2005 16:34:20 +0100 Message-ID: <43A8247C.7000903@macroscoop.nl> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from mondriaan.macroscoop.nl ([82.94.9.2]:1934 "EHLO mondriaan.macroscoop.nl") by vger.kernel.org with ESMTP id S1751095AbVLTPec (ORCPT ); Tue, 20 Dec 2005 10:34:32 -0500 Received: from rousseau.macroscoop.nl (rousseau.macroscoop.nl [IPv6:2001:888:1734:0:207:e9ff:fe1a:a80c]) by mondriaan.macroscoop.nl (envelope-from P.Zandbergen@macroscoop.nl) (8.13.4/8.13.4) with ESMTP id jBKFYLvI002408 for ; Tue, 20 Dec 2005 16:34:21 +0100 Received: from [82.94.9.131] (botero.macroscoop.nl [82.94.9.131]) by rousseau.macroscoop.nl (envelope-from P.Zandbergen@macroscoop.nl) (8.13.4/8.13.4) with ESMTP id jBKFYKx8014210 for ; Tue, 20 Dec 2005 16:34:20 +0100 Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: linux-scsi@vger.kernel.org Starting with kernel 2.6.13, my system crashes immediately reading from one of my two Nakamichi MJ-5.16S SCSI CD changers. For info on this device, see http://www.nakamichi.co.jp/download/MJ516S_J.PDF Sorry, this pdf is in japanese only. It's a CD changer that takes 5 CD's and loads the cd by opening the device that corresponds to the LUN. It has 1 SCSI ID and 5 LUNs. It happens always and immediately when I mount a data CD, or when I rip an audio CD. Oops data has to be captured from a serial console. Until Kernel 2.6.12, everything was fine. Problem still is there in 2.6.15-rc6. I'm using Fedora Core 4 x86_64 on a dual core Athlon 64 x2 4400+ Thanks for any help, following are the details. Pim oops data: general protection fault: 0000 [1] SMP CPU 1 Modules linked in: parport_pc lp parport rfcomm l2cap sunrpc deflate zlib_deflate twofish serpent aes blowfish des sha256 crypto_null af_key ip_nat_ftp ip_conntrack_ftp ipt_MASQUERADE iptable_nat ip_nat ipt_state ip_conntrack nfnetlink iptable_filter iptable_mangle ip_tables ip6table_filter ip6table_mangle ip6_tables ipv6 powermate hci_usb bluetooth yealink reiserfs vfat fat dm_mod video button battery ac ohci1394 ieee1394 ohci_hcd ehci_hcd dvb_ttpci l64781 saa7146_vv video_buf saa7146 v4l1_compat v4l2_common videodev ves1820 stv0299 dvb_core tda8083 stv0297 sp8870 ves1x93 ttpci_eeprom i2c_nforce2 i2c_core shpchp sata_sil24 snd_ca0106 snd_rawmidi snd_ac97_codec snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_ac97_bus snd_page_alloc prism54 sk98lin forcedeth sr_mod ext3 jbd usb_storage sata_nv libata aic7xxx scsi_transport_spi sd_mod scsi_mod Pid: 4473, comm: hald-addon-stor Not tainted 2.6.15-rc6 #1 RIP: 0010:[] {resched_task+29} RSP: 0018:ffff810002f5bea8 EFLAGS: 00010083 RAX: cccccccc4d1e464c RBX: 0000000000000001 RCX: ffff8100678ae000 RDX: 0000000000014b00 RSI: ffff810002c19958 RDI: ffff8100679bd850 RBP: ffff810002f5bea8 R08: 0000000002ca38b5 R09: ffff81007eb60a40 R10: 0000000000000001 R11: 0000000000000000 R12: ffff810002c197e0 R13: ffff810065183710 R14: ffff810002c198e0 R15: 0000000000000000 FS: 00002aaaaaacf900(0000) GS:ffffffff804b3880(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000039b4191b30 CR3: 0000000067aea000 CR4: 00000000000006e0 Process hald-addon-stor (pid: 4473, threadinfo ffff8100678ae000, task ffff8100679bd850) Stack: ffff810002f5bf18 ffffffff801329ed 0000000100000007 0000000080200002 000000000000000f 0000000100000001 0000000000000286 0000000100000001 0000000000000061 0000000000000100 Call Trace: {try_to_wake_up+1149} {process_timeout+0} {run_timer_softirq+371} {__do_softirq+100} {call_softirq+31} {do_softirq+44} {apic_timer_interrupt+98} {lock_timer_base+41} {__mod_timer+187} {as_queue_empty+0} {memset+40} Code: 8b 00 85 c0 7e 0d 0f 0b 68 e1 0b 39 80 c2 66 03 66 66 90 8b RIP {resched_task+29} RSP /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.03 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 01 Lun: 00 Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.03 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 02 Lun: 00 Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.03 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 00 Lun: 01 Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 00 Lun: 02 Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 00 Lun: 03 Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 00 Lun: 04 Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 01 Lun: 00 Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 01 Lun: 01 Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 01 Lun: 02 Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 01 Lun: 03 Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 01 Lun: 04 Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi2 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: HDS722525VLSA80 Rev: V36O Type: Direct-Access ANSI SCSI revision: 05 Host: scsi3 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: HDS722525VLSA80 Rev: V36O Type: Direct-Access ANSI SCSI revision: 05 Host: scsi4 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: HDS722525VLSA80 Rev: V36O Type: Direct-Access ANSI SCSI revision: 05 Host: scsi5 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: HDS722525VLSA80 Rev: V36O Type: Direct-Access ANSI SCSI revision: 05 Host: scsi6 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: HDS722525VLSA80 Rev: V36O Type: Direct-Access ANSI SCSI revision: 05 Host: scsi7 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: HDS722525VLSA80 Rev: V36O Type: Direct-Access ANSI SCSI revision: 05 lspci -vv (SCSI controller only) 01:07.0 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01) Subsystem: Adaptec AHA-3960D U160/m Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Node 0 -> Core 0 mtrr: v2.0 (20020519) Using local APIC timer interrupts. Detected 12.558 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4420.66 BogoMIPS (lpj=8841336) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1(2) -> Node 0 -> Core 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02 CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff -77 cycles, maxerr 548 cycles) Brought up 2 CPUs Disabling vsyscall due to use of PM timer time.c: Using PM based timekeeping. testing NMI watchdog ... OK. checking if image is initramfs... it is NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 PCI: Using MMCONFIG at e0000000 ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 Boot video device is 0000:05:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices Losing some ticks... checking if CPU frequency changed. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca) PCI-DMA: Disabling IOMMU. pnp: 00:00: ioport range 0x4000-0x407f could not be reserved pnp: 00:00: ioport range 0x4080-0x40ff has been reserved pnp: 00:00: ioport range 0x4400-0x447f has been reserved pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved pnp: 00:00: ioport range 0x4800-0x487f has been reserved pnp: 00:00: ioport range 0x4880-0x48ff has been reserved PCI: Bridge: 0000:00:09.0 IO window: d000-dfff MEM window: fde00000-fdefffff PREFETCH window: fdf00000-fdffffff PCI: Bridge: 0000:00:0b.0 IO window: c000-cfff MEM window: fdd00000-fddfffff PREFETCH window: fdc00000-fdcfffff PCI: Bridge: 0000:00:0c.0 IO window: b000-bfff MEM window: fdb00000-fdbfffff PREFETCH window: fda00000-fdafffff PCI: Bridge: 0000:00:0d.0 IO window: a000-afff MEM window: fd900000-fd9fffff PREFETCH window: fd800000-fd8fffff PCI: Bridge: 0000:00:0e.0 IO window: 9000-9fff MEM window: f4000000-fbffffff PREFETCH window: d0000000-dfffffff PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1135040109.484:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered PCI: Setting latency timer of device 0000:00:0b.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie03] PCI: Setting latency timer of device 0000:00:0c.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie03] PCI: Setting latency timer of device 0000:00:0d.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie03] PCI: Setting latency timer of device 0000:00:0e.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie03] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Fan [FAN] (on) ACPI: Thermal Zone [THRM] (22 C) Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15 FW Version=$Version$ Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 242 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller ide0: BM-DMA at 0xfb00-0xfb07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xfb08-0xfb0f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: HDS722525VLAT80, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: HDS722525VLAT80, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 488397168 sectors (250059 MB) w/7938KiB Cache, CHS=30401/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 hdc: max request size: 1024KiB hdc: 488397168 sectors (250059 MB) w/7938KiB Cache, CHS=30401/255/63, UDMA(100) hdc: cache flushes supported hdc: hdc1 ide-floppy driver 0.99.newide usbmon: debugfs is not available usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.50.4) powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x8 (1350 mV) powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xa (1300 mV) powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xc (1250 mV) powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) cpu_init done, current fid 0xe, vid 0x8 Freeing unused kernel memory: 368k freed SCSI subsystem initialized ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 GSI 16 sharing vector 0xD9 and IRQ 16 ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 217 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.03 Type: CD-ROM ANSI SCSI revision: 02 target0:0:0: Beginning Domain Validation target0:0:0: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16) target0:0:0: Domain Validation skipping write tests target0:0:0: Ending Domain Validation Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.03 Type: CD-ROM ANSI SCSI revision: 02 target0:0:1: Beginning Domain Validation target0:0:1: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16) target0:0:1: Domain Validation skipping write tests target0:0:1: Ending Domain Validation Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.03 Type: CD-ROM ANSI SCSI revision: 02 target0:0:2: Beginning Domain Validation target0:0:2: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16) target0:0:2: Domain Validation skipping write tests target0:0:2: Ending Domain Validation ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 GSI 17 sharing vector 0xE1 and IRQ 17 ACPI: PCI Interrupt 0000:01:07.1[B] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 225 scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11 Type: CD-ROM ANSI SCSI revision: 02 target1:0:0: Beginning Domain Validation target1:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) target1:0:0: Domain Validation skipping write tests target1:0:0: Ending Domain Validation Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11 Type: CD-ROM ANSI SCSI revision: 02 target1:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11 Type: CD-ROM ANSI SCSI revision: 02 target1:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11 Type: CD-ROM ANSI SCSI revision: 02 target1:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11 Type: CD-ROM ANSI SCSI revision: 02 target1:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11 Type: CD-ROM ANSI SCSI revision: 02 target1:0:1: Beginning Domain Validation target1:0:1: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) target1:0:1: Domain Validation skipping write tests target1:0:1: Ending Domain Validation Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11 Type: CD-ROM ANSI SCSI revision: 02 target1:0:1: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11 Type: CD-ROM ANSI SCSI revision: 02 target1:0:1: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11 Type: CD-ROM ANSI SCSI revision: 02 target1:0:1: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11 Type: CD-ROM ANSI SCSI revision: 02 target1:0:1: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) libata version 1.20 loaded. sata_nv 0000:00:07.0: version 0.8 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 GSI 18 sharing vector 0xE9 and IRQ 18 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 233 PCI: Setting latency timer of device 0000:00:07.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xF600 irq 233 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xF608 irq 233 ata1: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e9 86:3c02 87:4023 88:203f ata1: dev 0 ATA-6, max UDMA/100, 488397168 sectors: LBA48 nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed ata1: dev 0 configured for UDMA/100 scsi2 : sata_nv ata2: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e9 86:3c02 87:4023 88:203f ata2: dev 0 ATA-6, max UDMA/100, 488397168 sectors: LBA48 nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed ata2: dev 0 configured for UDMA/100 scsi3 : sata_nv Vendor: ATA Model: HDS722525VLSA80 Rev: V36O Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write back sda:<4>nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed sda1 sd 2:0:0:0: Attached scsi disk sda Vendor: ATA Model: HDS722525VLSA80 Rev: V36O Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdb: drive cache: write back sdb:<4>nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed sdb1 sd 3:0:0:0: Attached scsi disk sdb ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 GSI 19 sharing vector 0x32 and IRQ 19 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 50 PCI: Setting latency timer of device 0000:00:08.0 to 64 ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xF100 irq 50 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xF108 irq 50 ata3: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e9 86:3c02 87:4023 88:203f ata3: dev 0 ATA-6, max UDMA/100, 488397168 sectors: LBA48 nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed ata3: dev 0 configured for UDMA/100 scsi4 : sata_nv ata4: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e9 86:3c02 87:4023 88:203f ata4: dev 0 ATA-6, max UDMA/100, 488397168 sectors: LBA48 nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed ata4: dev 0 configured for UDMA/100 scsi5 : sata_nv Vendor: ATA Model: HDS722525VLSA80 Rev: V36O Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdc: drive cache: write back SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdc: drive cache: write back sdc:<4>nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed unknown partition table sd 4:0:0:0: Attached scsi disk sdc Vendor: ATA Model: HDS722525VLSA80 Rev: V36O Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdd: drive cache: write back SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdd: drive cache: write back sdd:<4>nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed unknown partition table sd 5:0:0:0: Attached scsi disk sdd Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks sr0: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 sr1: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray sr 0:0:1:0: Attached scsi CD-ROM sr1 sr2: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray sr 0:0:2:0: Attached scsi CD-ROM sr2 sr3: scsi3-mmc drive: 16x/16x xa/form2 cdda changer sr 1:0:0:0: Attached scsi CD-ROM sr3 sr4: scsi3-mmc drive: 16x/16x xa/form2 cdda changer sr 1:0:0:1: Attached scsi CD-ROM sr4 sr5: scsi3-mmc drive: 16x/16x xa/form2 cdda changer sr 1:0:0:2: Attached scsi CD-ROM sr5 sr6: scsi3-mmc drive: 16x/16x xa/form2 cdda changer sr 1:0:0:3: Attached scsi CD-ROM sr6 sr7: scsi3-mmc drive: 16x/16x xa/form2 cdda changer sr 1:0:0:4: Attached scsi CD-ROM sr7 sr8: scsi3-mmc drive: 16x/16x xa/form2 cdda changer sr 1:0:1:0: Attached scsi CD-ROM sr8 sr9: scsi3-mmc drive: 16x/16x xa/form2 cdda changer sr 1:0:1:1: Attached scsi CD-ROM sr9 sr10: scsi3-mmc drive: 16x/16x xa/form2 cdda changer sr 1:0:1:2: Attached scsi CD-ROM sr10 sr11: scsi3-mmc drive: 16x/16x xa/form2 cdda changer sr 1:0:1:3: Attached scsi CD-ROM sr11 sr12: scsi3-mmc drive: 16x/16x xa/form2 cdda changer sr 1:0:1:4: Attached scsi CD-ROM sr12 floppy0: no floppy controllers found forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.47. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 GSI 20 sharing vector 0x3A and IRQ 20 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:0a.0 to 64 eth0: forcedeth.c: subsystem: 01462:7100 bound to 0000:00:0a.0 Loaded prism54 driver, version 1.2 ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 225 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 GSI 21 sharing vector 0x42 and IRQ 21 ACPI: PCI Interrupt 0000:01:0d.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 66 Model 1009 Rev 00000000 Serial 10091462 sata_sil24 0000:03:00.0: version 0.23 ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:03:00.0 to 64 ata5: SATA max UDMA/100 cmd 0xFFFFC20000030000 ctl 0x0 bmdma 0x0 irq 66 ata6: SATA max UDMA/100 cmd 0xFFFFC20000032000 ctl 0x0 bmdma 0x0 irq 66 ata5: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e8 86:3c02 87:4023 88:003f ata5: dev 0 ATA-6, max UDMA/100, 488397168 sectors: LBA48 ata5: dev 0 configured for UDMA/100 scsi6 : sata_sil24 ata6: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e8 86:3c02 87:4023 88:003f ata6: dev 0 ATA-6, max UDMA/100, 488397168 sectors: LBA48 ata6: dev 0 configured for UDMA/100 scsi7 : sata_sil24 Vendor: ATA Model: HDS722525VLSA80 Rev: V36O Type: Direct-Access ANSI SCSI revision: 05 SCSI device sde: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sde: drive cache: write back SCSI device sde: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sde: drive cache: write back sde: sde1 sd 6:0:0:0: Attached scsi disk sde Vendor: ATA Model: HDS722525VLSA80 Rev: V36O Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdf: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdf: drive cache: write back SCSI device sdf: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdf: drive cache: write back sdf: sdf1 sd 7:0:0:0: Attached scsi disk sdf shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40 Linux video capture interface: v1.00 saa7146: register extension 'dvb'. ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 66 saa7146: found saa7146 @ mem ffffc2000002a000 (revision 1, irq 66) (0x13c2,0x0003). DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X). adapter has MAC addr = 00:d0:5c:22:ee:8e dvb-ttpci: gpioirq unknown type=0 len=0 dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 8000261f dvb-ttpci: firmware @ card 0 supports CI link layer interface dvb-ttpci: Crystal audio DAC @ card 0 detected saa7146_vv: saa7146 (0): registered device video0 [v4l2] DVB: registering frontend 0 (ST STV0299 DVB-S)... input: DVB on-card IR receiver as /class/input/input0 dvb-ttpci: found av7110-0. ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 GSI 22 sharing vector 0x4A and IRQ 22 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 74 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: irq 74, io mem 0xfeb00000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 233 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 233, io mem 0xfe02f000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1313 $ Ben Collins ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 GSI 23 sharing vector 0x52 and IRQ 23 ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 82 PCI: Via IRQ fixup for 0000:01:0c.0, from 11 to 2 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[82] MMIO=[fdefc000-fdefc7ff] Max Packet=[2048] usb 2-1: new full speed USB device using ohci_hcd and address 2 ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. hub 2-1:1.0: USB hub found device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com hub 2-1:1.0: 5 ports detected ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc00009b7d13] usb 2-2: new full speed USB device using ohci_hcd and address 3 EXT3 FS on hda3, internal journal hub 2-2:1.0: USB hub found hub 2-2:1.0: 3 ports detected kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: dm-3: found reiserfs format "3.6" with standard journal usb 2-8: new full speed USB device using ohci_hcd and address 4 usb 2-8: device descriptor read/64, error -110 usb 2-8: device descriptor read/64, error -110 ReiserFS: dm-3: using ordered data mode ReiserFS: dm-3: journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-3: checking transaction log (dm-3) ReiserFS: dm-3: Using r5 hash to sort names ReiserFS: dm-5: found reiserfs format "3.6" with standard journal ReiserFS: dm-5: using ordered data mode ReiserFS: dm-5: journal params: device dm-5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-5: checking transaction log (dm-5) ReiserFS: dm-5: Using r5 hash to sort names ReiserFS: dm-6: found reiserfs format "3.6" with standard journal usb 2-8: new full speed USB device using ohci_hcd and address 5 ReiserFS: dm-6: using ordered data mode ReiserFS: dm-6: journal params: device dm-6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-6: checking transaction log (dm-6) ReiserFS: dm-6: Using r5 hash to sort names ReiserFS: dm-10: found reiserfs format "3.6" with standard journal usb 2-8: device descriptor read/64, error -110 usb 2-8: device descriptor read/64, error -110 usb 2-8: new full speed USB device using ohci_hcd and address 6 usb 2-8: device not accepting address 6, error -110 usb 2-8: new full speed USB device using ohci_hcd and address 7 usb 2-8: device not accepting address 7, error -110 usb 2-9: new full speed USB device using ohci_hcd and address 8 usb 2-1.1: new full speed USB device using ohci_hcd and address 9 ReiserFS: dm-10: using ordered data mode ReiserFS: dm-10: journal params: device dm-10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-10: checking transaction log (dm-10) ReiserFS: dm-10: Using r5 hash to sort names ReiserFS: dm-7: found reiserfs format "3.6" with standard journal hiddev96: USB HID v1.00 Device [HID 04a8:0404] on usb-0000:00:02.0-1.1 usb 2-2.1: new full speed USB device using ohci_hcd and address 10 ReiserFS: dm-7: using ordered data mode ReiserFS: dm-7: journal params: device dm-7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-7: checking transaction log (dm-7) ReiserFS: dm-7: Using r5 hash to sort names ReiserFS: dm-12: found reiserfs format "3.6" with standard journal Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: HCI USB driver ver 2.9 drivers/usb/input/hid-core.c: timeout initializing reports input: Silitek IBM USB HUB KEYBOARD as /class/input/input1 input: USB HID v1.10 Keyboard [Silitek IBM USB HUB KEYBOARD] on usb-0000:00:02.0-2.1 usb 2-2.2: new low speed USB device using ohci_hcd and address 11 usb 2-2.3: new low speed USB device using ohci_hcd and address 12 input: B16_b_02 USB-PS/2 Optical Mouse as /class/input/input2 input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:02.0-2.3 usbcore: registered new driver yealink drivers/usb/input/yealink.c: Yealink phone driver:yld-20050816 usbcore: registered new driver hci_usb input: Griffin PowerMate as /class/input/input3 usbcore: registered new driver powermate ReiserFS: dm-12: using ordered data mode ReiserFS: dm-12: journal params: device dm-12, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-12: checking transaction log (dm-12) ReiserFS: dm-12: Using r5 hash to sort names ReiserFS: dm-8: found reiserfs format "3.6" with standard journal ReiserFS: dm-8: using ordered data mode ReiserFS: dm-8: journal params: device dm-8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-8: checking transaction log (dm-8) ReiserFS: dm-8: Using r5 hash to sort names ReiserFS: dm-9: found reiserfs format "3.6" with standard journal ReiserFS: dm-9: using ordered data mode ReiserFS: dm-9: journal params: device dm-9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-9: checking transaction log (dm-9) ReiserFS: dm-9: Using r5 hash to sort names ReiserFS: dm-11: found reiserfs format "3.6" with standard journal ReiserFS: dm-11: using ordered data mode ReiserFS: dm-11: journal params: device dm-11, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-11: checking transaction log (dm-11) ReiserFS: dm-11: Using r5 hash to sort names Adding 2097144k swap on /dev/vgpata1/lvswap. Priority:-1 extents:1 across:2097144k NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver ip6_tables: (C) 2000-2002 Netfilter core team ip_tables: (C) 2000-2002 Netfilter core team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (8192 buckets, 65536 max) - 312 bytes per conntrack process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead. eth1: resetting device... eth1: uploading firmware... eth1: firmware version: 1.0.4.3 eth1: firmware upload complete eth1: interface reset complete NET: Registered protocol family 15 sit1: Disabled Privacy Extensions Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.6 parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). lp0: console ready