* oops reading from Nakamichi SCSI CD changer
@ 2005-12-20 15:34 Pim Zandbergen
2005-12-22 12:33 ` Pim Zandbergen
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Pim Zandbergen @ 2005-12-20 15:34 UTC (permalink / raw)
To: linux-scsi
Starting with kernel 2.6.13, my system crashes immediately reading from
one of my two Nakamichi MJ-5.16S SCSI CD changers. For info on this
device, see http://www.nakamichi.co.jp/download/MJ516S_J.PDF
Sorry, this pdf is in japanese only. It's a CD changer that takes 5 CD's
and loads the cd by opening the device that corresponds to the LUN.
It has 1 SCSI ID and 5 LUNs.
It happens always and immediately when I mount a data CD, or when I rip
an audio CD.
Oops data has to be captured from a serial console.
Until Kernel 2.6.12, everything was fine. Problem still is there in
2.6.15-rc6.
I'm using Fedora Core 4 x86_64 on a dual core Athlon 64 x2 4400+
Thanks for any help, following are the details.
Pim
oops data:
general protection fault: 0000 [1] SMP
CPU 1
Modules linked in: parport_pc lp parport rfcomm l2cap sunrpc deflate
zlib_deflate twofish serpent aes blowfish des sha256 crypto_null af_key
ip_nat_ftp ip_conntrack_ftp ipt_MASQUERADE iptable_nat ip_nat ipt_state
ip_conntrack nfnetlink iptable_filter iptable_mangle ip_tables
ip6table_filter ip6table_mangle ip6_tables ipv6 powermate hci_usb
bluetooth yealink reiserfs vfat fat dm_mod video button battery ac
ohci1394 ieee1394 ohci_hcd ehci_hcd dvb_ttpci l64781 saa7146_vv
video_buf saa7146 v4l1_compat v4l2_common videodev ves1820 stv0299
dvb_core tda8083 stv0297 sp8870 ves1x93 ttpci_eeprom i2c_nforce2
i2c_core shpchp sata_sil24 snd_ca0106 snd_rawmidi snd_ac97_codec
snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device
snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_ac97_bus
snd_page_alloc prism54 sk98lin forcedeth sr_mod ext3 jbd usb_storage
sata_nv libata aic7xxx scsi_transport_spi sd_mod scsi_mod
Pid: 4473, comm: hald-addon-stor Not tainted 2.6.15-rc6 #1
RIP: 0010:[<ffffffff80130d4d>] <ffffffff80130d4d>{resched_task+29}
RSP: 0018:ffff810002f5bea8 EFLAGS: 00010083
RAX: cccccccc4d1e464c RBX: 0000000000000001 RCX: ffff8100678ae000
RDX: 0000000000014b00 RSI: ffff810002c19958 RDI: ffff8100679bd850
RBP: ffff810002f5bea8 R08: 0000000002ca38b5 R09: ffff81007eb60a40
R10: 0000000000000001 R11: 0000000000000000 R12: ffff810002c197e0
R13: ffff810065183710 R14: ffff810002c198e0 R15: 0000000000000000
FS: 00002aaaaaacf900(0000) GS:ffffffff804b3880(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000039b4191b30 CR3: 0000000067aea000 CR4: 00000000000006e0
Process hald-addon-stor (pid: 4473, threadinfo ffff8100678ae000, task
ffff8100679bd850)
Stack: ffff810002f5bf18 ffffffff801329ed 0000000100000007 0000000080200002
000000000000000f 0000000100000001 0000000000000286 0000000100000001
0000000000000061 0000000000000100
Call Trace: <IRQ> <ffffffff801329ed>{try_to_wake_up+1149}
<ffffffff80140420>{process_timeout+0}
<ffffffff80140a73>{run_timer_softirq+371}
<ffffffff8013c4a4>{__do_softirq+100}
<ffffffff8010f02f>{call_softirq+31} <ffffffff801109dc>{do_softirq+44}
<ffffffff8010e896>{apic_timer_interrupt+98} <EOI>
<ffffffff8013fe89>{lock_timer_base+41}
<ffffffff80140bbb>{__mod_timer+187}
<ffffffff8020db40>{as_queue_empty+0}
<ffffffff80219c88>{memset+40}
Code: 8b 00 85 c0 7e 0d 0f 0b 68 e1 0b 39 80 c2 66 03 66 66 90 8b
RIP <ffffffff80130d4d>{resched_task+29} RSP <ffff810002f5bea8>
/proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 01
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 02
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 03
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 04
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 01 Lun: 00
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 01 Lun: 01
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 01 Lun: 02
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 01 Lun: 03
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 01 Lun: 04
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: HDS722525VLSA80 Rev: V36O
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi3 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: HDS722525VLSA80 Rev: V36O
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi4 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: HDS722525VLSA80 Rev: V36O
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi5 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: HDS722525VLSA80 Rev: V36O
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi6 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: HDS722525VLSA80 Rev: V36O
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi7 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: HDS722525VLSA80 Rev: V36O
Type: Direct-Access ANSI SCSI revision: 05
lspci -vv (SCSI controller only)
01:07.0 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m
(rev 01)
Subsystem: Adaptec AHA-3960D U160/m
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (10000ns min, 6250ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 217
BIST result: 00
Region 0: I/O ports at dc00 [disabled] [size=256]
Region 1: Memory at fdefe000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at fdf00000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:07.1 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m
(rev 01)
Subsystem: Adaptec AHA-3960D U160/m
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (10000ns min, 6250ns max), Cache Line Size 08
Interrupt: pin B routed to IRQ 225
BIST result: 00
Region 0: I/O ports at da00 [disabled] [size=256]
Region 1: Memory at fdefd000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at fdf20000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
kernel config:
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_CPUSETS=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_LBD=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_MK8=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=m
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
CONFIG_SCHED_SMT=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_PREEMPT_BKL=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_DISCONTIGMEM_MANUAL=y
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_NR_CPUS=32
CONFIG_HPET_TIMER=y
CONFIG_X86_PM_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GART_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_PHYSICAL_START=0x100000
CONFIG_SECCOMP=y
CONFIG_HZ_250=y
CONFIG_HZ=250
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_PM=y
CONFIG_PM_LEGACY=y
CONFIG_ACPI=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_IBM=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_ACPI_BLACKLIST_YEAR=2001
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
CONFIG_YENTA=m
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=m
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_SHPC=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_UID16=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_BIC=y
CONFIG_IP_VS=m
CONFIG_IP_VS_TAB_BITS=12
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
CONFIG_BRIDGE_NETFILTER=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
CONFIG_IP_NF_CONNTRACK_EVENTS=y
CONFIG_IP_NF_CONNTRACK_NETLINK=m
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_NETBIOS_NS=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_PHYSDEV=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
CONFIG_IP_NF_MATCH_DCCP=m
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_CONNMARK=m
CONFIG_IP_NF_MATCH_CONNBYTES=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_MATCH_STRING=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_TARGET_NFQUEUE=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_PHYSDEV=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_NFQUEUE=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_TFRC_LIB=m
CONFIG_IP_SCTP=m
CONFIG_SCTP_HMAC_MD5=y
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
CONFIG_ATM_LANE=m
CONFIG_ATM_BR2684=m
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_LLC=m
CONFIG_IPX=m
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_NET_DIVERT=y
CONFIG_WAN_ROUTER=m
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_PKTGEN=m
CONFIG_IRDA=m
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRTTY_SIR=m
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_IEEE80211=m
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_CONNECTOR=m
CONFIG_MTD=m
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_AMDSTD_RETRY=3
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
CONFIG_MTD_SBC_GXX=m
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_PCI=m
CONFIG_MTD_PMC551=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
CONFIG_MTD_DOCPROBE_ADDRESS=0
CONFIG_MTD_NAND=m
CONFIG_MTD_NAND_IDS=m
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_PCMCIA=m
CONFIG_PARPORT_NOT_PC=y
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
CONFIG_PNPACPI=y
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_ATA_OVER_ETH=m
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_CMD640_ENHANCED=y
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_AEC62XX=y
CONFIG_BLK_DEV_ALI15X3=y
CONFIG_BLK_DEV_AMD74XX=y
CONFIG_BLK_DEV_ATIIXP=y
CONFIG_BLK_DEV_CMD64X=y
CONFIG_BLK_DEV_TRIFLEX=y
CONFIG_BLK_DEV_CY82C693=y
CONFIG_BLK_DEV_CS5520=y
CONFIG_BLK_DEV_CS5530=y
CONFIG_BLK_DEV_HPT34X=y
CONFIG_BLK_DEV_HPT366=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_IT821X=y
CONFIG_BLK_DEV_PDC202XX_OLD=y
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_PDC202XX_FORCE=y
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SIS5513=y
CONFIG_BLK_DEV_SLC90E66=y
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_ISCSI_TCP=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_SCSI_SATA=m
CONFIG_SCSI_SATA_NV=m
CONFIG_SCSI_SATA_SIL=m
CONFIG_SCSI_SATA_SIL24=m
CONFIG_SCSI_QLA2XXX=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID5=m
CONFIG_MD_RAID6=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
CONFIG_IEEE1394=m
CONFIG_IEEE1394_OUI_DB=y
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m
CONFIG_I2O=m
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_NET_SB1000=m
CONFIG_PHYLIB=m
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_NET_PCI=y
CONFIG_FORCEDETH=m
CONFIG_DGRS=y
CONFIG_EEPRO100=m
CONFIG_E100=m
CONFIG_SK98LIN=m
CONFIG_NET_RADIO=y
CONFIG_ATMEL=y
CONFIG_PCI_ATMEL=m
CONFIG_PRISM54=m
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_NET_WIRELESS=y
CONFIG_FDDI=y
CONFIG_SKFP=m
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_INPUT=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_UINPUT=m
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=m
CONFIG_N_HDLC=m
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_TIPAR=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_WATCHDOG=y
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_I8XX_TCO=m
CONFIG_SC1200_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
CONFIG_USBPCWATCHDOG=m
CONFIG_HW_RANDOM=m
CONFIG_RTC=y
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_MWAVE=m
CONFIG_HPET=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_STUB=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_RTC8564=m
CONFIG_SENSORS_MAX6875=m
CONFIG_RTC_X1205_I2C=m
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7134_DVB_ALL_FRONTENDS=y
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_DPC=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_DVB_ALL_FRONTENDS=y
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_VIDEO_AUDIO_DECODER=m
CONFIG_VIDEO_DECODER=m
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_DVB=y
CONFIG_DVB_CORE=m
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
CONFIG_DVB_USB=m
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_CINERGYT2=m
CONFIG_DVB_CINERGYT2_TUNING=y
CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
CONFIG_DVB_BT8XX=m
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_CX24110=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA80XX=m
CONFIG_DVB_MT312=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_ATMEL_AT76C651=m
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_STV0297=m
CONFIG_DVB_NXT2002=m
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_VIDEOBUF=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_CIRRUS=m
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
CONFIG_FB_RIVA=m
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_ATY128=m
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_VOODOO1=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_TRIDENT_ACCEL=y
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_DEVICE=y
CONFIG_SOUND=m
CONFIG_SND=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_GENERIC_DRIVER=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MPU401=m
CONFIG_SND_BT87X=m
CONFIG_SND_CA0106=m
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_ACECAD=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_MTOUCH=m
CONFIG_USB_ITMTOUCH=m
CONFIG_USB_EGALAX=m
CONFIG_USB_YEALINK=m
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
CONFIG_USB_KEYSPAN_REMOTE=m
CONFIG_USB_APPLETOUCH=m
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_DABUSB=m
CONFIG_USB_VICAM=m
CONFIG_USB_DSBR=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_W9968CF=m
CONFIG_USB_PWC=m
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_ZD1201=m
CONFIG_USB_MON=y
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
CONFIG_USB_EMI62=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TEST=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_XUSBATM=m
CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_WBSD=m
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_IPOIB=m
CONFIG_EDD=m
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=m
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_EXPORT=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_QUOTA=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
CONFIG_NTFS_FS=m
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
CONFIG_CIFS=m
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
CONFIG_PARTITION_ADVANCED=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_SGI_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_LOG_BUF_SHIFT=15
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
dmesg:
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(2) -> Node 0 -> Core 0
mtrr: v2.0 (20020519)
Using local APIC timer interrupts.
Detected 12.558 MHz APIC timer.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4420.66 BogoMIPS
(lpj=8841336)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1(2) -> Node 0 -> Core 1
AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02
CPU 1: Syncing TSC to CPU 0.
CPU 1: synchronized TSC with CPU 0 (last diff -77 cycles, maxerr 548 cycles)
Brought up 2 CPUs
Disabling vsyscall due to use of PM timer
time.c: Using PM based timekeeping.
testing NMI watchdog ... OK.
checking if image is initramfs... it is
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
PCI: Using MMCONFIG at e0000000
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
Boot video device is 0000:05:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
Losing some ticks... checking if CPU frequency changed.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
PCI-DMA: Disabling IOMMU.
pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
pnp: 00:00: ioport range 0x4400-0x447f has been reserved
pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
pnp: 00:00: ioport range 0x4800-0x487f has been reserved
pnp: 00:00: ioport range 0x4880-0x48ff has been reserved
PCI: Bridge: 0000:00:09.0
IO window: d000-dfff
MEM window: fde00000-fdefffff
PREFETCH window: fdf00000-fdffffff
PCI: Bridge: 0000:00:0b.0
IO window: c000-cfff
MEM window: fdd00000-fddfffff
PREFETCH window: fdc00000-fdcfffff
PCI: Bridge: 0000:00:0c.0
IO window: b000-bfff
MEM window: fdb00000-fdbfffff
PREFETCH window: fda00000-fdafffff
PCI: Bridge: 0000:00:0d.0
IO window: a000-afff
MEM window: fd900000-fd9fffff
PREFETCH window: fd800000-fd8fffff
PCI: Bridge: 0000:00:0e.0
IO window: 9000-9fff
MEM window: f4000000-fbffffff
PREFETCH window: d0000000-dfffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1135040109.484:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:0b.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie03]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie03]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie03]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie03]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (22 C)
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550
11/16/96 03:45:15
FW Version=$Version$
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
ide0: BM-DMA at 0xfb00-0xfb07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xfb08-0xfb0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: HDS722525VLAT80, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HDS722525VLAT80, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 488397168 sectors (250059 MB) w/7938KiB Cache, CHS=30401/255/63,
UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
hdc: max request size: 1024KiB
hdc: 488397168 sectors (250059 MB) w/7938KiB Cache, CHS=30401/255/63,
UDMA(100)
hdc: cache flushes supported
hdc: hdc1
ide-floppy driver 0.99.newide
usbmon: debugfs is not available
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.50.4)
powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x8 (1350 mV)
powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xa (1300 mV)
powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xc (1250 mV)
powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
cpu_init done, current fid 0xe, vid 0x8
Freeing unused kernel memory: 368k freed
SCSI subsystem initialized
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
GSI 16 sharing vector 0xD9 and IRQ 16
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level,
low) -> IRQ 217
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec 3960D Ultra160 SCSI adapter>
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
target0:0:0: Beginning Domain Validation
target0:0:0: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16)
target0:0:0: Domain Validation skipping write tests
target0:0:0: Ending Domain Validation
Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
target0:0:1: Beginning Domain Validation
target0:0:1: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16)
target0:0:1: Domain Validation skipping write tests
target0:0:1: Ending Domain Validation
Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
target0:0:2: Beginning Domain Validation
target0:0:2: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16)
target0:0:2: Domain Validation skipping write tests
target0:0:2: Ending Domain Validation
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
GSI 17 sharing vector 0xE1 and IRQ 17
ACPI: PCI Interrupt 0000:01:07.1[B] -> Link [APC3] -> GSI 18 (level,
low) -> IRQ 225
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec 3960D Ultra160 SCSI adapter>
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11
Type: CD-ROM ANSI SCSI revision: 02
target1:0:0: Beginning Domain Validation
target1:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
target1:0:0: Domain Validation skipping write tests
target1:0:0: Ending Domain Validation
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11
Type: CD-ROM ANSI SCSI revision: 02
target1:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11
Type: CD-ROM ANSI SCSI revision: 02
target1:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11
Type: CD-ROM ANSI SCSI revision: 02
target1:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11
Type: CD-ROM ANSI SCSI revision: 02
target1:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11
Type: CD-ROM ANSI SCSI revision: 02
target1:0:1: Beginning Domain Validation
target1:0:1: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
target1:0:1: Domain Validation skipping write tests
target1:0:1: Ending Domain Validation
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11
Type: CD-ROM ANSI SCSI revision: 02
target1:0:1: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11
Type: CD-ROM ANSI SCSI revision: 02
target1:0:1: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11
Type: CD-ROM ANSI SCSI revision: 02
target1:0:1: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.11
Type: CD-ROM ANSI SCSI revision: 02
target1:0:1: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
libata version 1.20 loaded.
sata_nv 0000:00:07.0: version 0.8
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
GSI 18 sharing vector 0xE9 and IRQ 18
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level,
low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xF600 irq 233
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xF608 irq 233
ata1: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e9 86:3c02 87:4023
88:203f
ata1: dev 0 ATA-6, max UDMA/100, 488397168 sectors: LBA48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata1: dev 0 configured for UDMA/100
scsi2 : sata_nv
ata2: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e9 86:3c02 87:4023
88:203f
ata2: dev 0 ATA-6, max UDMA/100, 488397168 sectors: LBA48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata2: dev 0 configured for UDMA/100
scsi3 : sata_nv
Vendor: ATA Model: HDS722525VLSA80 Rev: V36O
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sda: drive cache: write back
sda:<4>nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
sda1
sd 2:0:0:0: Attached scsi disk sda
Vendor: ATA Model: HDS722525VLSA80 Rev: V36O
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sdb: drive cache: write back
sdb:<4>nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
sdb1
sd 3:0:0:0: Attached scsi disk sdb
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
GSI 19 sharing vector 0x32 and IRQ 19
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level,
low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xF100 irq 50
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xF108 irq 50
ata3: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e9 86:3c02 87:4023
88:203f
ata3: dev 0 ATA-6, max UDMA/100, 488397168 sectors: LBA48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata3: dev 0 configured for UDMA/100
scsi4 : sata_nv
ata4: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e9 86:3c02 87:4023
88:203f
ata4: dev 0 ATA-6, max UDMA/100, 488397168 sectors: LBA48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata4: dev 0 configured for UDMA/100
scsi5 : sata_nv
Vendor: ATA Model: HDS722525VLSA80 Rev: V36O
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sdc: drive cache: write back
SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sdc: drive cache: write back
sdc:<4>nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
unknown partition table
sd 4:0:0:0: Attached scsi disk sdc
Vendor: ATA Model: HDS722525VLSA80 Rev: V36O
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sdd: drive cache: write back
SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sdd: drive cache: write back
sdd:<4>nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
unknown partition table
sd 5:0:0:0: Attached scsi disk sdd
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
sr0: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray
sr 0:0:1:0: Attached scsi CD-ROM sr1
sr2: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray
sr 0:0:2:0: Attached scsi CD-ROM sr2
sr3: scsi3-mmc drive: 16x/16x xa/form2 cdda changer
sr 1:0:0:0: Attached scsi CD-ROM sr3
sr4: scsi3-mmc drive: 16x/16x xa/form2 cdda changer
sr 1:0:0:1: Attached scsi CD-ROM sr4
sr5: scsi3-mmc drive: 16x/16x xa/form2 cdda changer
sr 1:0:0:2: Attached scsi CD-ROM sr5
sr6: scsi3-mmc drive: 16x/16x xa/form2 cdda changer
sr 1:0:0:3: Attached scsi CD-ROM sr6
sr7: scsi3-mmc drive: 16x/16x xa/form2 cdda changer
sr 1:0:0:4: Attached scsi CD-ROM sr7
sr8: scsi3-mmc drive: 16x/16x xa/form2 cdda changer
sr 1:0:1:0: Attached scsi CD-ROM sr8
sr9: scsi3-mmc drive: 16x/16x xa/form2 cdda changer
sr 1:0:1:1: Attached scsi CD-ROM sr9
sr10: scsi3-mmc drive: 16x/16x xa/form2 cdda changer
sr 1:0:1:2: Attached scsi CD-ROM sr10
sr11: scsi3-mmc drive: 16x/16x xa/form2 cdda changer
sr 1:0:1:3: Attached scsi CD-ROM sr11
sr12: scsi3-mmc drive: 16x/16x xa/form2 cdda changer
sr 1:0:1:4: Attached scsi CD-ROM sr12
floppy0: no floppy controllers found
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.47.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
GSI 20 sharing vector 0x3A and IRQ 20
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 21 (level,
low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:0a.0 to 64
eth0: forcedeth.c: subsystem: 01462:7100 bound to 0000:00:0a.0
Loaded prism54 driver, version 1.2
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level,
low) -> IRQ 225
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
GSI 21 sharing vector 0x42 and IRQ 21
ACPI: PCI Interrupt 0000:01:0d.0[A] -> Link [APC1] -> GSI 16 (level,
low) -> IRQ 66
Model 1009 Rev 00000000 Serial 10091462
sata_sil24 0000:03:00.0: version 0.23
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC1] -> GSI 16 (level,
low) -> IRQ 66
PCI: Setting latency timer of device 0000:03:00.0 to 64
ata5: SATA max UDMA/100 cmd 0xFFFFC20000030000 ctl 0x0 bmdma 0x0 irq 66
ata6: SATA max UDMA/100 cmd 0xFFFFC20000032000 ctl 0x0 bmdma 0x0 irq 66
ata5: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e8 86:3c02 87:4023
88:003f
ata5: dev 0 ATA-6, max UDMA/100, 488397168 sectors: LBA48
ata5: dev 0 configured for UDMA/100
scsi6 : sata_sil24
ata6: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e8 86:3c02 87:4023
88:003f
ata6: dev 0 ATA-6, max UDMA/100, 488397168 sectors: LBA48
ata6: dev 0 configured for UDMA/100
scsi7 : sata_sil24
Vendor: ATA Model: HDS722525VLSA80 Rev: V36O
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sde: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sde: drive cache: write back
SCSI device sde: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sde: drive cache: write back
sde: sde1
sd 6:0:0:0: Attached scsi disk sde
Vendor: ATA Model: HDS722525VLSA80 Rev: V36O
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdf: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sdf: drive cache: write back
SCSI device sdf: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sdf: drive cache: write back
sdf: sdf1
sd 7:0:0:0: Attached scsi disk sdf
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
Linux video capture interface: v1.00
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC1] -> GSI 16 (level,
low) -> IRQ 66
saa7146: found saa7146 @ mem ffffc2000002a000 (revision 1, irq 66)
(0x13c2,0x0003).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
adapter has MAC addr = 00:d0:5c:22:ee:8e
dvb-ttpci: gpioirq unknown type=0 len=0
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068,
app 8000261f
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: Crystal audio DAC @ card 0 detected
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
DVB: registering frontend 0 (ST STV0299 DVB-S)...
input: DVB on-card IR receiver as /class/input/input0
dvb-ttpci: found av7110-0.
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
GSI 22 sharing vector 0x4A and IRQ 22
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level,
low) -> IRQ 74
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: irq 74, io mem 0xfeb00000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level,
low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 233, io mem 0xfe02f000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
GSI 23 sharing vector 0x52 and IRQ 23
ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [APC4] -> GSI 19 (level,
low) -> IRQ 82
PCI: Via IRQ fixup for 0000:01:0c.0, from 11 to 2
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[82]
MMIO=[fdefc000-fdefc7ff] Max Packet=[2048]
usb 2-1: new full speed USB device using ohci_hcd and address 2
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
hub 2-1:1.0: USB hub found
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
hub 2-1:1.0: 5 ports detected
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc00009b7d13]
usb 2-2: new full speed USB device using ohci_hcd and address 3
EXT3 FS on hda3, internal journal
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 3 ports detected
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ReiserFS: dm-3: found reiserfs format "3.6" with standard journal
usb 2-8: new full speed USB device using ohci_hcd and address 4
usb 2-8: device descriptor read/64, error -110
usb 2-8: device descriptor read/64, error -110
ReiserFS: dm-3: using ordered data mode
ReiserFS: dm-3: journal params: device dm-3, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: dm-3: checking transaction log (dm-3)
ReiserFS: dm-3: Using r5 hash to sort names
ReiserFS: dm-5: found reiserfs format "3.6" with standard journal
ReiserFS: dm-5: using ordered data mode
ReiserFS: dm-5: journal params: device dm-5, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: dm-5: checking transaction log (dm-5)
ReiserFS: dm-5: Using r5 hash to sort names
ReiserFS: dm-6: found reiserfs format "3.6" with standard journal
usb 2-8: new full speed USB device using ohci_hcd and address 5
ReiserFS: dm-6: using ordered data mode
ReiserFS: dm-6: journal params: device dm-6, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: dm-6: checking transaction log (dm-6)
ReiserFS: dm-6: Using r5 hash to sort names
ReiserFS: dm-10: found reiserfs format "3.6" with standard journal
usb 2-8: device descriptor read/64, error -110
usb 2-8: device descriptor read/64, error -110
usb 2-8: new full speed USB device using ohci_hcd and address 6
usb 2-8: device not accepting address 6, error -110
usb 2-8: new full speed USB device using ohci_hcd and address 7
usb 2-8: device not accepting address 7, error -110
usb 2-9: new full speed USB device using ohci_hcd and address 8
usb 2-1.1: new full speed USB device using ohci_hcd and address 9
ReiserFS: dm-10: using ordered data mode
ReiserFS: dm-10: journal params: device dm-10, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: dm-10: checking transaction log (dm-10)
ReiserFS: dm-10: Using r5 hash to sort names
ReiserFS: dm-7: found reiserfs format "3.6" with standard journal
hiddev96: USB HID v1.00 Device [HID 04a8:0404] on usb-0000:00:02.0-1.1
usb 2-2.1: new full speed USB device using ohci_hcd and address 10
ReiserFS: dm-7: using ordered data mode
ReiserFS: dm-7: journal params: device dm-7, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: dm-7: checking transaction log (dm-7)
ReiserFS: dm-7: Using r5 hash to sort names
ReiserFS: dm-12: found reiserfs format "3.6" with standard journal
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
drivers/usb/input/hid-core.c: timeout initializing reports
input: Silitek IBM USB HUB KEYBOARD as /class/input/input1
input: USB HID v1.10 Keyboard [Silitek IBM USB HUB KEYBOARD] on
usb-0000:00:02.0-2.1
usb 2-2.2: new low speed USB device using ohci_hcd and address 11
usb 2-2.3: new low speed USB device using ohci_hcd and address 12
input: B16_b_02 USB-PS/2 Optical Mouse as /class/input/input2
input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on
usb-0000:00:02.0-2.3
usbcore: registered new driver yealink
drivers/usb/input/yealink.c: Yealink phone driver:yld-20050816
usbcore: registered new driver hci_usb
input: Griffin PowerMate as /class/input/input3
usbcore: registered new driver powermate
ReiserFS: dm-12: using ordered data mode
ReiserFS: dm-12: journal params: device dm-12, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: dm-12: checking transaction log (dm-12)
ReiserFS: dm-12: Using r5 hash to sort names
ReiserFS: dm-8: found reiserfs format "3.6" with standard journal
ReiserFS: dm-8: using ordered data mode
ReiserFS: dm-8: journal params: device dm-8, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: dm-8: checking transaction log (dm-8)
ReiserFS: dm-8: Using r5 hash to sort names
ReiserFS: dm-9: found reiserfs format "3.6" with standard journal
ReiserFS: dm-9: using ordered data mode
ReiserFS: dm-9: journal params: device dm-9, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: dm-9: checking transaction log (dm-9)
ReiserFS: dm-9: Using r5 hash to sort names
ReiserFS: dm-11: found reiserfs format "3.6" with standard journal
ReiserFS: dm-11: using ordered data mode
ReiserFS: dm-11: journal params: device dm-11, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: dm-11: checking transaction log (dm-11)
ReiserFS: dm-11: Using r5 hash to sort names
Adding 2097144k swap on /dev/vgpata1/lvswap. Priority:-1 extents:1
across:2097144k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 312 bytes per conntrack
process `sysctl' is using deprecated sysctl (syscall)
net.ipv6.neigh.lo.base_reachable_time; Use
net.ipv6.neigh.lo.base_reachable_time_ms instead.
eth1: resetting device...
eth1: uploading firmware...
eth1: firmware version: 1.0.4.3
eth1: firmware upload complete
eth1: interface reset complete
NET: Registered protocol family 15
sit1: Disabled Privacy Extensions
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.6
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
lp0: console ready
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: oops reading from Nakamichi SCSI CD changer
2005-12-20 15:34 oops reading from Nakamichi SCSI CD changer Pim Zandbergen
@ 2005-12-22 12:33 ` Pim Zandbergen
2005-12-23 3:02 ` Randy.Dunlap
2006-01-25 18:49 ` Pim Zandbergen
2006-02-01 0:30 ` Pim Zandbergen
2 siblings, 1 reply; 5+ messages in thread
From: Pim Zandbergen @ 2005-12-22 12:33 UTC (permalink / raw)
To: linux-scsi
A couple of days ago, I mailed a bug report with this subject to this list.
When it arrived back, it was caught by spamassassin on our mailserver.
Somehow, the patterns used in the kernel config, dmesg, oops and
/proc/scsi/scsi output triggered spamassassin.
Does that mean that my message does not get to the right people?
Should I resend it with all the details in an attached zip file?
Thanks,
Pim
> Starting with kernel 2.6.13, my system crashes immediately reading from
> one of my two Nakamichi MJ-5.16S SCSI CD changers. For info on this
> device, see http://www.nakamichi.co.jp/download/MJ516S_J.PDF
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: oops reading from Nakamichi SCSI CD changer
2005-12-22 12:33 ` Pim Zandbergen
@ 2005-12-23 3:02 ` Randy.Dunlap
0 siblings, 0 replies; 5+ messages in thread
From: Randy.Dunlap @ 2005-12-23 3:02 UTC (permalink / raw)
To: Pim Zandbergen; +Cc: linux-scsi
On Thu, 22 Dec 2005 13:33:48 +0100 Pim Zandbergen wrote:
> A couple of days ago, I mailed a bug report with this subject to this list.
> When it arrived back, it was caught by spamassassin on our mailserver.
> Somehow, the patterns used in the kernel config, dmesg, oops and
> /proc/scsi/scsi output triggered spamassassin.
>
> Does that mean that my message does not get to the right people?
> Should I resend it with all the details in an attached zip file?
Your email (about 72 KB) made it to the linux-scsi mailing list OK.
It's all here. It just means that people are busy with other
things or taking some time off (as in holidays).
---
~Randy
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: oops reading from Nakamichi SCSI CD changer
2005-12-20 15:34 oops reading from Nakamichi SCSI CD changer Pim Zandbergen
2005-12-22 12:33 ` Pim Zandbergen
@ 2006-01-25 18:49 ` Pim Zandbergen
2006-02-01 0:30 ` Pim Zandbergen
2 siblings, 0 replies; 5+ messages in thread
From: Pim Zandbergen @ 2006-01-25 18:49 UTC (permalink / raw)
To: linux-scsi, linux-kernel
The oops that I previously posted occured when I tried to read a data CD
or rip an audio CD. But I also got random lockups, only when logged into
the console. These stopped now I disconnected the SCSI CD changers.
Maybe this was Gnome trying to figure whether a CD has been inserted.
Here's an oops I grabbed from the serial console after a random lockup:
general protection fault: 0000 [1] SMP
CPU 1
Modules linked in: esp4 ah4 parport_pc lp parport rfcomm l2cap sunrpc
deflate zlib_deflate twofish serpent aes blowfish des sha256 crypto_null
af_key ip_nat_ftp ip_conntrack_ftp iptable_mangle ipt_state
iptable_filter ipt_MASQUERADE iptable_nat ip_nat ip_conntrack nfnetlink
ip_tables ip6table_mangle ip6table_filter ip6_tables ipv6 yealink
hci_usb bluetooth usblp reiserfs vfat fat dm_mod video button battery ac
ohci1394 ieee1394 ohci_hcd ehci_hcd dvb_ttpci l64781 saa7146_vv
video_buf saa7146 v4l1_compat v4l2_common videodev ves1820 stv0299
dvb_core tda8083 stv0297 sp8870 ves1x93 ttpci_eeprom i2c_nforce2
i2c_core shpchp snd_ca0106 snd_rawmidi snd_ac97_codec snd_seq_dummy
snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss
snd_mixer_oss snd_pcm snd_timer snd soundcore snd_ac97_bus
snd_page_alloc prism54 sk98lin forcedeth floppy sr_mod ext3 jbd
usb_storage sata_sil24 sata_nv libata aic7xxx scsi_transport_spi sd_mod
scsi_mod
Pid: 4542, comm: hald-addon-stor Not tainted 2.6.15.1 #1
RIP: 0010:[<ffffffff8036d739>] <ffffffff8036d739>{schedule+2729}
RSP: 0018:ffff81010862b898 EFLAGS: 00010087
RAX: 0000000000014b00 RBX: ffff81010bca0ab0 RCX: ffff81010bca0ab0
RDX: cccccccc4d1e79cc RSI: 000002849effe740 RDI: ffff81010bca0ab0
RBP: ffff81010862b968 R08: 0000000000000000 R09: ffff8100c908f340
R10: 0000000000000002 R11: ffffffff8020d9d0 R12: 0000000000000000
R13: 0000000000000001 R14: ffff81000c00b8e0 R15: 000002849effe740
FS: 00002aaaaaacf900(0000) GS:ffffffff804b3880(0000) knlGS:00000000555776c0
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00002aaaaaaac000 CR3: 0000000108627000 CR4: 00000000000006e0
Process hald-addon-stor (pid: 4542, threadinfo ffff81010862a000, task
ffff81010bca0ab0)
Stack: ffff8101278132d8 ffff8100c3c4eb40 ffff810127813000 0000000000001056
ffff810127813000 ffffffff880077e0 0000000000000001 ffff8101276fbd48
0000000000000292 0000000000019b16
Call Trace:<ffffffff880077e0>{:scsi_mod:scsi_request_fn+880}
<ffffffff88007c23>{:scsi_mod:scsi_queue_insert+195}
<ffffffff8036dd68>{cond_resched+72}
<ffffffff8036e187>{wait_for_completion+23}
<ffffffff8020653c>{blk_execute_rq+204}
<ffffffff802093b5>{get_request_wait+53}
<ffffffff88005c70>{:scsi_mod:scsi_execute+224}
<ffffffff88005d44>{:scsi_mod:scsi_execute_req+164}
<ffffffff88006729>{:scsi_mod:scsi_test_unit_ready+73}
<ffffffff880c25fe>{:sr_mod:sr_media_change+78}
<ffffffff802bffdb>{media_changed+75}
<ffffffff8018e0c7>{check_disk_change+39}
<ffffffff802c179e>{cdrom_open+2494}
<ffffffff801a0bc5>{__d_lookup+165} <ffffffff80195985>{do_lookup+117}
<ffffffff8019f8ff>{dput+47} <ffffffff8019687e>{__link_path_walk+3454}
<ffffffff801a3f64>{mntput_no_expire+36}
<ffffffff80196ade>{link_path_walk+254}
<ffffffff802144e2>{kobject_get+18} <ffffffff8020b3dc>{get_disk+76}
<ffffffff802144e2>{kobject_get+18}
<ffffffff880c3161>{:sr_mod:sr_block_open+193}
<ffffffff8018ebd3>{do_open+195} <ffffffff8018e464>{bdget+276}
<ffffffff8018eed0>{blkdev_open+0} <ffffffff8018eeff>{blkdev_open+47}
<ffffffff8018569a>{__dentry_open+250}
<ffffffff801858ae>{filp_open+46}
<ffffffff80184a32>{get_unused_fd+98}
<ffffffff80185a0f>{do_sys_open+79}
<ffffffff8010dcae>{system_call+126}
Code: c7 42 08 01 00 00 00 49 8b 46 48 48 8b 53 60 48 39 c2 48 0f
RIP <ffffffff8036d739>{schedule+2729} RSP <ffff81010862b898>
NMI Watchdog detected LOCKUP on CPU 0
CPU 0
Modules linked in: esp4 ah4 parport_pc lp parport rfcomm l2cap sunrpc
deflate zlib_deflate twofish serpent aes blowfish des sha256 crypto_null
af_key ip_nat_ftp ip_conntrack_ftp iptable_mangle ipt_state
iptable_filter ipt_MASQUERADE iptable_nat ip_nat ip_conntrack nfnetlink
ip_tables ip6table_mangle ip6table_filter ip6_tables ipv6 yealink
hci_usb bluetooth usblp reiserfs vfat fat dm_mod video button battery ac
ohci1394 ieee1394 ohci_hcd ehci_hcd dvb_ttpci l64781 saa7146_vv
video_buf saa7146 v4l1_compat v4l2_common videodev ves1820 stv0299
dvb_core tda8083 stv0297 sp8870 ves1x93 ttpci_eeprom i2c_nforce2
i2c_core shpchp snd_ca0106 snd_rawmidi snd_ac97_codec snd_seq_dummy
snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss
snd_mixer_oss snd_pcm snd_timer snd soundcore snd_ac97_bus
snd_page_alloc prism54 sk98lin forcedeth floppy sr_mod ext3 jbd
usb_storage sata_sil24 sata_nv libata aic7xxx scsi_transport_spi sd_mod
scsi_mod
Pid: 5666, comm: pan Not tainted 2.6.15.1 #1
RIP: 0010:[<ffffffff8036eebb>] <ffffffff8036eebb>{.text.lock.spinlock+2}
RSP: 0018:ffff81011c0dbba0 EFLAGS: 00000082
RAX: 0000000000000080 RBX: ffffffff80517980 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff81000c00b8e0
RBP: ffff81011c0dbc08 R08: 0000000000000000 R09: ffff8100cfcad780
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
R13: ffff8101083e0870 R14: ffff81000c00b8e0 R15: 0000000000000000
FS: 00002aaaaaadb960(0000) GS:ffffffff804b3800(0000) knlGS:00000000555776c0
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00002aaaaaaac000 CR3: 0000000116c2d000 CR4: 00000000000006e0
Process pan (pid: 5666, threadinfo ffff81011c0da000, task ffff810037e00e60)
Stack: ffffffff801325be 0000000100000000 000000008016823a 0000000000000001
0000000127c07180 0000000000000082 0000000000000001 0000000000003340
0000000000000000 ffff810104e734f8
Call Trace:<ffffffff801325be>{try_to_wake_up+78}
<ffffffff8012f173>{__wake_up_common+67}
<ffffffff8012f1f3>{__wake_up+67}
<ffffffff802fd0e4>{sock_def_readable+52}
<ffffffff80367bce>{unix_stream_sendmsg+718}
<ffffffff802faf75>{sock_aio_write+325}
<ffffffff80185fdd>{do_sync_write+205}
<ffffffff8036d9c0>{thread_return+0}
<ffffffff8014d2f0>{autoremove_wake_function+0}
<ffffffff80186534>{vfs_write+244}
<ffffffff80186fe3>{sys_write+83} <ffffffff8010dcae>{system_call+126}
Code: 83 3f 00 7e f9 e9 3b fd ff ff e8 0a ad ea ff e9 91 fd ff ff
console shuts up ...
<0>Kernel panic - not syncing: Aiee, killing interrupt handler!
NMI Watchdog detected LOCKUP on CPU 1
CPU 1
Modules linked in: esp4 ah4 parport_pc lp parport rfcomm l2cap sunrpc
deflate zlib_deflate twofish serpent aes blowfish des sha256 crypto_null
af_key ip_nat_ftp ip_conntrack_ftp iptable_mangle ipt_state
iptable_filter ipt_MASQUERADE iptable_nat ip_nat ip_conntrack nfnetlink
ip_tables ip6table_mangle ip6table_filter ip6_tables ipv6 yealink
hci_usb bluetooth usblp reiserfs vfat fat dm_mod video button battery ac
ohci1394 ieee1394 ohci_hcd ehci_hcd dvb_ttpci l64781 saa7146_vv
video_buf saa7146 v4l1_compat v4l2_common videodev ves1820 stv0299
dvb_core tda8083 stv0297 sp8870 ves1x93 ttpci_eeprom i2c_nforce2
i2c_core shpchp snd_ca0106 snd_rawmidi snd_ac97_codec snd_seq_dummy
snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss
snd_mixer_oss snd_pcm snd_timer snd soundcore snd_ac97_bus
snd_page_alloc prism54 sk98lin forcedeth floppy sr_mod ext3 jbd
usb_storage sata_sil24 sata_nv libata aic7xxx scsi_transport_spi sd_mod
scsi_mod
Pid: 4542, comm: hald-addon-stor Not tainted 2.6.15.1 #1
RIP: 0010:[<ffffffff8036eebb>] <ffffffff8036eebb>{.text.lock.spinlock+2}
RSP: 0018:ffff810127cb7f40 EFLAGS: 00000082
RAX: ffff81000c00b958 RBX: ffff81010bca0ab0 RCX: 00000000366a1e06
RDX: 000002849ef17376 RSI: 0000000000000000 RDI: ffff81000c00b8e0
RBP: ffff810127cb7f78 R08: 0000000000000001 R09: ffff8101275d9880
R10: 0000000000001400 R11: 0000000000000000 R12: ffff81000c00b8e0
R13: 0000000000000001 R14: 0000000000000001 R15: 000002849effe740
FS: 00002aaaaaacf900(0000) GS:ffffffff804b3880(0000) knlGS:00000000555776c0
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00002aaaaaaac000 CR3: 0000000108627000 CR4: 00000000000006e0
Process hald-addon-stor (pid: 4542, threadinfo ffff81010862a000, task
ffff81010bca0ab0)
Stack: ffffffff80133067 0000000000000001 ffff81010bca0ab0 0000000000000000
0000000000000001 000000000000000b 000002849effe740 0000000000000001
ffffffff801408ef ffff81010b4628c0
Call Trace: <IRQ> <ffffffff80133067>{scheduler_tick+199}
<ffffffff801408ef>{update_process_times+239}
<ffffffff8011a1f9>{smp_apic_timer_interrupt+57}
<ffffffff8010e896>{apic_timer_interrupt+98}
<EOI> <ffffffff8036e70b>{__down_read+155}
<ffffffff8036e682>{__down_read+18}
<ffffffff80133fff>{mm_release+47} <ffffffff801385ce>{exit_mm+62}
<ffffffff80139354>{do_exit+564}
<ffffffff80273117>{do_unblank_screen+119}
<ffffffff8010fa41>{die+81}
<ffffffff8010fe6e>{do_general_protection+270}
<ffffffff8010e9e9>{error_exit+0} <ffffffff8020d9d0>{as_queue_empty+0}
<ffffffff8036d739>{schedule+2729} <ffffffff8036cdf5>{schedule+357}
<ffffffff880077e0>{:scsi_mod:scsi_request_fn+880}
<ffffffff88007c23>{:scsi_mod:scsi_queue_insert+195}
<ffffffff8036dd68>{cond_resched+72}
<ffffffff8036e187>{wait_for_completion+23}
<ffffffff8020653c>{blk_execute_rq+204}
<ffffffff802093b5>{get_request_wait+53}
<ffffffff88005c70>{:scsi_mod:scsi_execute+224}
<ffffffff88005d44>{:scsi_mod:scsi_execute_req+164}
<ffffffff88006729>{:scsi_mod:scsi_test_unit_ready+73}
<ffffffff880c25fe>{:sr_mod:sr_media_change+78}
<ffffffff802bffdb>{media_changed+75}
<ffffffff8018e0c7>{check_disk_change+39}
<ffffffff802c179e>{cdrom_open+2494}
<ffffffff801a0bc5>{__d_lookup+165} <ffffffff80195985>{do_lookup+117}
<ffffffff8019f8ff>{dput+47} <ffffffff8019687e>{__link_path_walk+3454}
<ffffffff801a3f64>{mntput_no_expire+36}
<ffffffff80196ade>{link_path_walk+254}
<ffffffff802144e2>{kobject_get+18} <ffffffff8020b3dc>{get_disk+76}
<ffffffff802144e2>{kobject_get+18}
<ffffffff880c3161>{:sr_mod:sr_block_open+193}
<ffffffff8018ebd3>{do_open+195} <ffffffff8018e464>{bdget+276}
<ffffffff8018eed0>{blkdev_open+0} <ffffffff8018eeff>{blkdev_open+47}
<ffffffff8018569a>{__dentry_open+250}
<ffffffff801858ae>{filp_open+46}
<ffffffff80184a32>{get_unused_fd+98}
<ffffffff80185a0f>{do_sys_open+79}
<ffffffff8010dcae>{system_call+126}
Code: 83 3f 00 7e f9 e9 3b fd ff ff e8 0a ad ea ff e9 91 fd ff ff
console shuts up ...
<0>Kernel panic - not syncing: Aiee, killing interrupt handler!
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: oops reading from Nakamichi SCSI CD changer
2005-12-20 15:34 oops reading from Nakamichi SCSI CD changer Pim Zandbergen
2005-12-22 12:33 ` Pim Zandbergen
2006-01-25 18:49 ` Pim Zandbergen
@ 2006-02-01 0:30 ` Pim Zandbergen
2 siblings, 0 replies; 5+ messages in thread
From: Pim Zandbergen @ 2006-02-01 0:30 UTC (permalink / raw)
To: linux-scsi
I wrote:
> Starting with kernel 2.6.13, my system crashes immediately reading from
> one of my two Nakamichi MJ-5.16S SCSI CD changers.
It appears this bug is related to the Adaptec AHA-3960D HBA. I temporarily
replaced it with an LSI Logic 53C875E based card using the sym53c8xx
driver and all was fine.
Unfortunately, this did not help me, as I need the Adaptec's dual channels.
Pim
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2006-02-01 0:30 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-12-20 15:34 oops reading from Nakamichi SCSI CD changer Pim Zandbergen
2005-12-22 12:33 ` Pim Zandbergen
2005-12-23 3:02 ` Randy.Dunlap
2006-01-25 18:49 ` Pim Zandbergen
2006-02-01 0:30 ` Pim Zandbergen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox