Re: Fw: [BUG] 2.6.17-rc1: SCSI kobject_add problems

[Michael Reed <mdr@sgi.com>]

See my post on 4/21:

	"2.6.17-rc2: kobject_add failed"

	http://marc.theaimsgroup.com/?l=linux-scsi&m=114563629810793&w=2

Perhaps this is related?

http://marc.theaimsgroup.com/?t=114443491400001&r=1&w=2

Mike


Andrew Morton wrote:
> 
> Begin forwarded message:
> 
> Date: Fri, 7 Apr 2006 13:31:05 -0500 (CDT)
> From: rct@gherkin.frus.com (Bob Tracy)
> To: linux-kernel@vger.kernel.org
> Subject: [BUG] 2.6.17-rc1: SCSI kobject_add problems
> 
> 
> System is a DEC Alpha 433au with two SCSI disks.  SCSI controller is a
> QLA1040 supported by the qla1280 driver.  Runs 2.6.16 fine.  Tried
> booting 2.6.17-rc1 and got
> 
> kobject_add failed for 0:0: with -EEXIST, don't try to register things with the same name in the same directory
> 
> and a fairly long trace output when the system attempted to add sdb.
> Not surprisingly, sdb was inaccessible.
> 
> Normally (for 2.6.16 anyway), the following relationship exists:
> 
> sd 0:0:0:0	sda
> sd 0:0:1:0	sdb
> 
> More information *might* be available if needed, but will have to be
> transcribed by hand.  My /usr partition is on sdb, so I don't get very
> far with 2.6.17-rc1 on Alpha :-).  The problem is probably specific to
> the qla1280 or the Alpha, as I have a x86 Adaptec SCSI-based system
> with multiple spindles that works fine with 2.6.17-rc1.
>