From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hannes Reinecke Subject: Re: [PATCH] aic7[9x]xx: Remove last vestiges of reverse_scan Date: Mon, 10 Jul 2006 11:11:58 +0200 Message-ID: <44B219DE.2080107@suse.de> References: <20060708200226.GG1605@parisc-linux.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from ns.suse.de ([195.135.220.2]:30441 "EHLO mx1.suse.de") by vger.kernel.org with ESMTP id S1751374AbWGJJMK (ORCPT ); Mon, 10 Jul 2006 05:12:10 -0400 In-Reply-To: <20060708200226.GG1605@parisc-linux.org> Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: Matthew Wilcox Cc: linux-scsi@vger.kernel.org Matthew Wilcox wrote: > Remove last vestiges of the reverse_scan paramater from aic7xxx and a= ic79xx. >=20 > Signed-off-by: Matthew Wilcox >=20 > Index: ./drivers/scsi/aic7xxx/aic79xx_osm.c > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > RCS file: /var/cvs/linux-2.6/drivers/scsi/aic7xxx/aic79xx_osm.c,v > retrieving revision 1.23 > diff -u -p -r1.23 aic79xx_osm.c > --- ./drivers/scsi/aic7xxx/aic79xx_osm.c 6 Jul 2006 12:23:21 -0000 1.= 23 > +++ ./drivers/scsi/aic7xxx/aic79xx_osm.c 8 Jul 2006 20:00:31 -0000 > @@ -243,25 +243,6 @@ ahd_print_path(struct ahd_softc *ahd, st > static uint32_t aic79xx_no_reset; > =20 > /* > - * Certain PCI motherboards will scan PCI devices from highest to lo= west, > - * others scan from lowest to highest, and they tend to do all kinds= of > - * strange things when they come into contact with PCI bridge chips.= The > - * net result of all this is that the PCI card that is actually used= to boot > - * the machine is very hard to detect. Most motherboards go from lo= west > - * PCI slot number to highest, and the first SCSI controller found i= s the > - * one you boot from. The only exceptions to this are when a contro= ller > - * has its BIOS disabled. So, we by default sort all of our SCSI co= ntrollers > - * from lowest PCI slot number to highest PCI slot number. We also = force > - * all controllers with their BIOS disabled to the end of the list. = This > - * works on *almost* all computers. Where it doesn't work, we have = this > - * option. Setting this option to non-0 will reverse the order of t= he sort > - * to highest first, then lowest, but will still leave cards with th= eir BIOS > - * disabled at the very end. That should fix everyone up unless the= re are > - * really strange cirumstances. > - */ > -static uint32_t aic79xx_reverse_scan; > - > -/* > * Should we force EXTENDED translation on a controller. > * 0 =3D=3D Use whatever is in the SEEPROM or default to off > * 1 =3D=3D Use whatever is in the SEEPROM or default to on > @@ -350,7 +331,6 @@ MODULE_PARM_DESC(aic79xx, > " periodically to prevent tag starvation.\n" > " This may be required by some older disk\n" > " or drives/RAID arrays.\n" > -" reverse_scan Sort PCI devices highest Bus/Slot to lowest\n" > " tag_info: Set per-target tag depth\n" > " global_tag_depth: Global tag depth for all targets on all bus= es\n" > " slewrate:Set the signal slew rate (0-15).\n" > @@ -1031,7 +1011,6 @@ aic79xx_setup(char *s) > #ifdef AHD_DEBUG > { "debug", &ahd_debug }, > #endif > - { "reverse_scan", &aic79xx_reverse_scan }, > { "periodic_otag", &aic79xx_periodic_otag }, > { "pci_parity", &aic79xx_pci_parity }, > { "seltime", &aic79xx_seltime }, > Index: ./drivers/scsi/aic7xxx/aic7xxx_osm.c > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > RCS file: /var/cvs/linux-2.6/drivers/scsi/aic7xxx/aic7xxx_osm.c,v > retrieving revision 1.24 > diff -u -p -r1.24 aic7xxx_osm.c > --- ./drivers/scsi/aic7xxx/aic7xxx_osm.c 6 Jul 2006 12:23:21 -0000 1.= 24 > +++ ./drivers/scsi/aic7xxx/aic7xxx_osm.c 8 Jul 2006 20:00:31 -0000 > @@ -353,7 +353,6 @@ MODULE_PARM_DESC(aic7xxx, > " periodically to prevent tag starvation.\n" > " This may be required by some older disk\n" > " drives or RAID arrays.\n" > -" reverse_scan Sort PCI devices highest Bus/Slot to lowest\n" > " tag_info: Set per-target tag depth\n" > " global_tag_depth: Global tag depth for every target\n" > " on every bus\n" > - Signed-off-by: Hannes-Reinecke Cheers, Hannes --=20 Dr. Hannes Reinecke hare@suse.de SuSE Linux Products GmbH S390 & zSeries Maxfeldstra=DFe 5 +49 911 74053 688 90409 N=FCrnberg http://www.suse.de - To unsubscribe from this list: send the line "unsubscribe linux-scsi" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html