From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexander Jolk Subject: Re: SCSI tape (Re: scsi negotiation problem on aic79xx (39320A) in 2.6.14) Date: Mon, 27 Nov 2006 19:01:31 +0100 Message-ID: <456B27FB.1090707@buf.com> References: <456B2052.1060300@buf.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from mail.buf.fr ([195.68.52.65]:31660 "EHLO mail.buf.fr") by vger.kernel.org with ESMTP id S1758417AbWK0SBf (ORCPT ); Mon, 27 Nov 2006 13:01:35 -0500 In-Reply-To: Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: Raymond Scholz Cc: Denny Page , linux-scsi@vger.kernel.org Raymond Scholz wrote: > My initial (private) mail didn't contain any specific hardware > versions. So if it helps to track down the reason for the negotiation > problem, here they are: > > LTO tape: > > Host: scsi2 Channel: 00 Id: 06 Lun: 00 > Vendor: CERTANCE Model: ULTRIUM 2 Rev: 1823 > Type: Sequential-Access ANSI SCSI revision: 03 > > Controller: > > Adaptec AIC79xx driver version: 1.3.11 > Adaptec AIC7902 Ultra320 SCSI adapter > aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs Here are mine: Host: scsi1 Channel: 00 Id: 01 Lun: 00 Vendor: HP Model: Ultrium 3-SCSI Rev: G25H Type: Sequential-Access ANSI SCSI revision: 03 Fusion MPT SPI Host driver 3.04.02 ioc1: 53C1030: Capabilities={Initiator,Target} scsi1 : ioc1: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=19 scsi 1:0:1:0: Sequential-Access HP Ultrium 3-SCSI G25H PQ: 0 ANSI: 3 target1:0:1: Beginning Domain Validation target1:0:1: Ending Domain Validation target1:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI PCOMP (6.25 ns, offset 64) Alex -- Alexander Jolk / BUF Compagnie tel +33-1 42 68 18 28 / fax +33-1 42 68 18 29