From: Vivek Gautam <vivek.gautam@codeaurora.org>
To: Can Guo <cang@codeaurora.org>,
dianders@chromium.org, subhashj@codeaurora.org,
asutoshd@codeaurora.org, evgreen@chromium.org,
rnayak@codeaurora.org, vinholikatti@gmail.com,
jejb@linux.vnet.ibm.com, martin.petersen@oracle.com
Cc: linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org,
Venkat Gopalakrishnan <venkatg@codeaurora.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3 1/1] scsi: ufs: make UFS Tx lane1 clock optional for QCOM platforms
Date: Fri, 12 Oct 2018 11:40:32 +0530 [thread overview]
Message-ID: <462df3c4-582b-ccf1-8ced-e0c084bca0f2@codeaurora.org> (raw)
In-Reply-To: <1539306736-9519-1-git-send-email-cang@codeaurora.org>
On 10/12/2018 6:42 AM, Can Guo wrote:
> From: Venkat Gopalakrishnan <venkatg@codeaurora.org>
>
> Per Qcom's UFS host controller HW design, the UFS Tx lane1 clock could be
> muxed with Tx lane0 clock, hence keep Tx lane1 clock optional by ignoring
> it if it is not provided in device tree. This change also performs some
> cleanup to lanes per direction checks when enable/disable lane clocks just
> for symmetry.
>
> Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
> Signed-off-by: Can Guo <cang@codeaurora.org>
> ---
> Changes since v2:
> - Incorporated review comments from Doug.
>
> Changes since v1:
> - Incorporated review comments from Doug.
> - Update the commit title and commit message.
>
> drivers/scsi/ufs/ufs-qcom.c | 55 ++++++++++++++++++++++++---------------------
> 1 file changed, 29 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
> index 2b38db2..dbc84cb 100644
> --- a/drivers/scsi/ufs/ufs-qcom.c
> +++ b/drivers/scsi/ufs/ufs-qcom.c
> @@ -79,20 +79,28 @@ static int ufs_qcom_get_connected_tx_lanes(struct ufs_hba *hba, u32 *tx_lanes)
> }
>
> static int ufs_qcom_host_clk_get(struct device *dev,
> - const char *name, struct clk **clk_out)
> + const char *name, struct clk **clk_out, bool optional)
> {
> struct clk *clk;
> int err = 0;
>
> clk = devm_clk_get(dev, name);
> - if (IS_ERR(clk)) {
> - err = PTR_ERR(clk);
> - dev_err(dev, "%s: failed to get %s err %d",
> - __func__, name, err);
> - } else {
> + if (!IS_ERR(clk)) {
> *clk_out = clk;
> + return 0;
> }
>
> + err = PTR_ERR(clk);
> +
> + if (optional && err == -ENOENT) {
> + *clk_out = NULL;
> + return 0;
> + }
> +
> + if (err != -EPROBE_DEFER)
> + dev_err(dev, "failed to get %s err %d",
> + name, err);
> +
> return err;
> }
>
> @@ -113,11 +121,9 @@ static void ufs_qcom_disable_lane_clks(struct ufs_qcom_host *host)
> if (!host->is_lane_clks_enabled)
> return;
>
> - if (host->hba->lanes_per_direction > 1)
> - clk_disable_unprepare(host->tx_l1_sync_clk);
> + clk_disable_unprepare(host->tx_l1_sync_clk);
> clk_disable_unprepare(host->tx_l0_sync_clk);
> - if (host->hba->lanes_per_direction > 1)
> - clk_disable_unprepare(host->rx_l1_sync_clk);
> + clk_disable_unprepare(host->rx_l1_sync_clk);
> clk_disable_unprepare(host->rx_l0_sync_clk);
>
> host->is_lane_clks_enabled = false;
> @@ -141,24 +147,21 @@ static int ufs_qcom_enable_lane_clks(struct ufs_qcom_host *host)
> if (err)
> goto disable_rx_l0;
>
> - if (host->hba->lanes_per_direction > 1) {
> - err = ufs_qcom_host_clk_enable(dev, "rx_lane1_sync_clk",
> + err = ufs_qcom_host_clk_enable(dev, "rx_lane1_sync_clk",
> host->rx_l1_sync_clk);
> - if (err)
> - goto disable_tx_l0;
> + if (err)
> + goto disable_tx_l0;
>
> - err = ufs_qcom_host_clk_enable(dev, "tx_lane1_sync_clk",
> + err = ufs_qcom_host_clk_enable(dev, "tx_lane1_sync_clk",
> host->tx_l1_sync_clk);
> - if (err)
> - goto disable_rx_l1;
> - }
> + if (err)
> + goto disable_rx_l1;
>
> host->is_lane_clks_enabled = true;
> goto out;
>
> disable_rx_l1:
> - if (host->hba->lanes_per_direction > 1)
> - clk_disable_unprepare(host->rx_l1_sync_clk);
> + clk_disable_unprepare(host->rx_l1_sync_clk);
> disable_tx_l0:
> clk_disable_unprepare(host->tx_l0_sync_clk);
> disable_rx_l0:
> @@ -172,25 +175,25 @@ static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host)
> int err = 0;
> struct device *dev = host->hba->dev;
>
> - err = ufs_qcom_host_clk_get(dev,
> - "rx_lane0_sync_clk", &host->rx_l0_sync_clk);
> + err = ufs_qcom_host_clk_get(dev, "rx_lane0_sync_clk",
> + &host->rx_l0_sync_clk, false);
> if (err)
> goto out;
>
> - err = ufs_qcom_host_clk_get(dev,
> - "tx_lane0_sync_clk", &host->tx_l0_sync_clk);
> + err = ufs_qcom_host_clk_get(dev, "tx_lane0_sync_clk",
> + &host->tx_l0_sync_clk, false);
> if (err)
> goto out;
>
> /* In case of single lane per direction, don't read lane1 clocks */
> if (host->hba->lanes_per_direction > 1) {
> err = ufs_qcom_host_clk_get(dev, "rx_lane1_sync_clk",
> - &host->rx_l1_sync_clk);
> + &host->rx_l1_sync_clk, false);
> if (err)
> goto out;
>
> err = ufs_qcom_host_clk_get(dev, "tx_lane1_sync_clk",
> - &host->tx_l1_sync_clk);
> + &host->tx_l1_sync_clk, true);
> }
> out:
> return err;
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Best regards
Vivek
next prev parent reply other threads:[~2018-10-12 6:10 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-12 1:12 [PATCH v3 1/1] scsi: ufs: make UFS Tx lane1 clock optional for QCOM platforms Can Guo
2018-10-12 6:10 ` Vivek Gautam [this message]
2018-10-12 6:46 ` cang
2018-10-12 16:55 ` Doug Anderson
2018-10-13 2:13 ` cang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=462df3c4-582b-ccf1-8ced-e0c084bca0f2@codeaurora.org \
--to=vivek.gautam@codeaurora.org \
--cc=asutoshd@codeaurora.org \
--cc=cang@codeaurora.org \
--cc=dianders@chromium.org \
--cc=evgreen@chromium.org \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=rnayak@codeaurora.org \
--cc=subhashj@codeaurora.org \
--cc=venkatg@codeaurora.org \
--cc=vinholikatti@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox