From: Boaz Harrosh <bharrosh@panasas.com>
To: James Bottomley <James.Bottomley@SteelEye.com>,
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>,
Greg Kroah-Hartman <gregkh@suse.de>,
Alan Stern <stern@rowland.harvard.edu>,
Matthew
Subject: [PATCH 08/24] nsp_cs.c convert to data accessors and !use_sg cleanup
Date: Wed, 12 Sep 2007 02:56:45 +0300 [thread overview]
Message-ID: <46E72B3D.7060408@panasas.com> (raw)
In-Reply-To: <46E6F92D.2090409@panasas.com>
- use scsi data accessors
- cleanup !use_sg code paths
- TODO: use next_sg() for Jens's sglist branch. Look for 2
places with "SCp.buffer++"
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
---
drivers/scsi/pcmcia/nsp_cs.c | 54 ++++++++++++++++++++++++++---------------
1 files changed, 34 insertions(+), 20 deletions(-)
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index 445cfbb..e41908b 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -144,6 +144,11 @@ static nsp_hw_data nsp_data_base; /* attach <-> detect glue */
#define NSP_DEBUG_BUF_LEN 150
+static inline void nsp_inc_resid(struct scsi_cmnd *SCpnt, int residInc)
+{
+ scsi_set_resid(SCpnt, scsi_get_resid(SCpnt) + residInc);
+}
+
static void nsp_cs_message(const char *func, int line, char *type, char *fmt, ...)
{
va_list args;
@@ -201,8 +206,10 @@ static int nsp_queuecommand(struct scsi_cmnd *SCpnt,
#endif
nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
- nsp_dbg(NSP_DEBUG_QUEUECOMMAND, "SCpnt=0x%p target=%d lun=%d buff=0x%p bufflen=%d use_sg=%d",
- SCpnt, target, SCpnt->device->lun, SCpnt->request_buffer, SCpnt->request_bufflen, SCpnt->use_sg);
+ nsp_dbg(NSP_DEBUG_QUEUECOMMAND,
+ "SCpnt=0x%p target=%d lun=%d sglist=0x%p bufflen=%d sg_count=%d",
+ SCpnt, target, SCpnt->device->lun, scsi_sglist(SCpnt),
+ scsi_bufflen(SCpnt), scsi_sg_count(SCpnt));
//nsp_dbg(NSP_DEBUG_QUEUECOMMAND, "before CurrentSC=0x%p", data->CurrentSC);
SCpnt->scsi_done = done;
@@ -234,7 +241,7 @@ static int nsp_queuecommand(struct scsi_cmnd *SCpnt,
SCpnt->SCp.have_data_in = IO_UNKNOWN;
SCpnt->SCp.sent_command = 0;
SCpnt->SCp.phase = PH_UNDETERMINED;
- SCpnt->resid = SCpnt->request_bufflen;
+ scsi_set_resid(SCpnt, scsi_bufflen(SCpnt));
/* setup scratch area
SCp.ptr : buffer pointer
@@ -242,14 +249,14 @@ static int nsp_queuecommand(struct scsi_cmnd *SCpnt,
SCp.buffer : next buffer
SCp.buffers_residual : left buffers in list
SCp.phase : current state of the command */
- if (SCpnt->use_sg) {
- SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->request_buffer;
+ if (scsi_bufflen(SCpnt)) {
+ SCpnt->SCp.buffer = scsi_sglist(SCpnt);
SCpnt->SCp.ptr = BUFFER_ADDR;
SCpnt->SCp.this_residual = SCpnt->SCp.buffer->length;
- SCpnt->SCp.buffers_residual = SCpnt->use_sg - 1;
+ SCpnt->SCp.buffers_residual = scsi_sg_count(SCpnt) - 1;
} else {
- SCpnt->SCp.ptr = (char *) SCpnt->request_buffer;
- SCpnt->SCp.this_residual = SCpnt->request_bufflen;
+ SCpnt->SCp.ptr = NULL;
+ SCpnt->SCp.this_residual = 0;
SCpnt->SCp.buffer = NULL;
SCpnt->SCp.buffers_residual = 0;
}
@@ -730,7 +737,9 @@ static void nsp_pio_read(struct scsi_cmnd *SCpnt)
ocount = data->FifoCount;
nsp_dbg(NSP_DEBUG_DATA_IO, "in SCpnt=0x%p resid=%d ocount=%d ptr=0x%p this_residual=%d buffers=0x%p nbuf=%d",
- SCpnt, SCpnt->resid, ocount, SCpnt->SCp.ptr, SCpnt->SCp.this_residual, SCpnt->SCp.buffer, SCpnt->SCp.buffers_residual);
+ SCpnt, scsi_get_resid(SCpnt), ocount, SCpnt->SCp.ptr,
+ SCpnt->SCp.this_residual, SCpnt->SCp.buffer,
+ SCpnt->SCp.buffers_residual);
time_out = 1000;
@@ -780,7 +789,7 @@ static void nsp_pio_read(struct scsi_cmnd *SCpnt)
return;
}
- SCpnt->resid -= res;
+ nsp_inc_resid(SCpnt, -res);
SCpnt->SCp.ptr += res;
SCpnt->SCp.this_residual -= res;
ocount += res;
@@ -804,10 +813,12 @@ static void nsp_pio_read(struct scsi_cmnd *SCpnt)
if (time_out == 0) {
nsp_msg(KERN_DEBUG, "pio read timeout resid=%d this_residual=%d buffers_residual=%d",
- SCpnt->resid, SCpnt->SCp.this_residual, SCpnt->SCp.buffers_residual);
+ scsi_get_resid(SCpnt), SCpnt->SCp.this_residual,
+ SCpnt->SCp.buffers_residual);
}
nsp_dbg(NSP_DEBUG_DATA_IO, "read ocount=0x%x", ocount);
- nsp_dbg(NSP_DEBUG_DATA_IO, "r cmd=%d resid=0x%x\n", data->CmdId, SCpnt->resid);
+ nsp_dbg(NSP_DEBUG_DATA_IO, "r cmd=%d resid=0x%x\n", data->CmdId,
+ scsi_get_resid(SCpnt));
}
/*
@@ -825,7 +836,9 @@ static void nsp_pio_write(struct scsi_cmnd *SCpnt)
ocount = data->FifoCount;
nsp_dbg(NSP_DEBUG_DATA_IO, "in fifocount=%d ptr=0x%p this_residual=%d buffers=0x%p nbuf=%d resid=0x%x",
- data->FifoCount, SCpnt->SCp.ptr, SCpnt->SCp.this_residual, SCpnt->SCp.buffer, SCpnt->SCp.buffers_residual, SCpnt->resid);
+ data->FifoCount, SCpnt->SCp.ptr, SCpnt->SCp.this_residual,
+ SCpnt->SCp.buffer, SCpnt->SCp.buffers_residual,
+ scsi_get_resid(SCpnt));
time_out = 1000;
@@ -839,7 +852,7 @@ static void nsp_pio_write(struct scsi_cmnd *SCpnt)
nsp_dbg(NSP_DEBUG_DATA_IO, "phase changed stat=0x%x, res=%d\n", stat, res);
/* Put back pointer */
- SCpnt->resid += res;
+ nsp_inc_resid(SCpnt, res);
SCpnt->SCp.ptr -= res;
SCpnt->SCp.this_residual += res;
ocount -= res;
@@ -875,7 +888,7 @@ static void nsp_pio_write(struct scsi_cmnd *SCpnt)
break;
}
- SCpnt->resid -= res;
+ nsp_inc_resid(SCpnt, -res);
SCpnt->SCp.ptr += res;
SCpnt->SCp.this_residual -= res;
ocount += res;
@@ -895,10 +908,12 @@ static void nsp_pio_write(struct scsi_cmnd *SCpnt)
data->FifoCount = ocount;
if (time_out == 0) {
- nsp_msg(KERN_DEBUG, "pio write timeout resid=0x%x", SCpnt->resid);
+ nsp_msg(KERN_DEBUG, "pio write timeout resid=0x%x",
+ scsi_get_resid(SCpnt));
}
nsp_dbg(NSP_DEBUG_DATA_IO, "write ocount=0x%x", ocount);
- nsp_dbg(NSP_DEBUG_DATA_IO, "w cmd=%d resid=0x%x\n", data->CmdId, SCpnt->resid);
+ nsp_dbg(NSP_DEBUG_DATA_IO, "w cmd=%d resid=0x%x\n", data->CmdId,
+ scsi_get_resid(SCpnt));
}
#undef RFIFO_CRIT
#undef WFIFO_CRIT
@@ -920,9 +935,8 @@ static int nsp_nexus(struct scsi_cmnd *SCpnt)
nsp_index_write(base, SYNCREG, sync->SyncRegister);
nsp_index_write(base, ACKWIDTH, sync->AckWidth);
- if (SCpnt->use_sg == 0 ||
- SCpnt->resid % 4 != 0 ||
- SCpnt->resid <= PAGE_SIZE ) {
+ if (scsi_get_resid(SCpnt) % 4 != 0 ||
+ scsi_get_resid(SCpnt) <= PAGE_SIZE ) {
data->TransferMode = MODE_IO8;
} else if (nsp_burst_mode == BURST_MEM32) {
data->TransferMode = MODE_MEM32;
--
1.5.3.1
next prev parent reply other threads:[~2007-09-11 23:57 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-11 20:23 [patchset 0/24] Lots of the Accessors patches and !use_sg cleanup Boaz Harrosh
2007-09-11 20:50 ` Cameron, Steve
2007-09-11 21:05 ` Boaz Harrosh
2007-09-11 23:49 ` [PATCH 01/24] usb: transport - convert to accessors and !use_sg code path removal Boaz Harrosh
2007-09-11 23:50 ` [PATCH 02/24] usb: protocol.c " Boaz Harrosh
2007-09-11 23:51 ` [PATCH 03/24] usb: shuttle_usbat.c " Boaz Harrosh
2007-09-11 23:51 ` [PATCH 04/24] usb: freecom.c & sddr09.c - convert to accessors and !use_sg cleanup Boaz Harrosh
2007-09-11 23:53 ` [PATCH 05/24] isd200.c: use one-element sg list in issuing commands Boaz Harrosh
2007-09-11 23:54 ` [PATCH 06/24] NCR5380 familly convert to accessors & !use_sg cleanup Boaz Harrosh
2007-09-11 23:55 ` [PATCH 07/24] arm: scsi convert to accessors and " Boaz Harrosh
2007-09-12 7:42 ` Russell King
2007-09-18 15:04 ` Boaz Harrosh
2007-12-15 0:27 ` James Bottomley
2007-12-16 15:28 ` Boaz Harrosh
2008-02-01 20:10 ` Russell King
2008-01-31 18:09 ` James Bottomley
2007-09-11 23:56 ` Boaz Harrosh [this message]
2007-09-11 23:58 ` [PATCH 09/24] libata-scsi: convert to use the data buffer accessors Boaz Harrosh
2007-09-12 0:09 ` Jeff Garzik
2007-09-12 0:25 ` Boaz Harrosh
2007-09-12 1:40 ` Matthew Dharm
2007-09-12 6:36 ` Boaz Harrosh
2007-09-18 15:46 ` [PATCH ver2 1/2] libata-scsi: Remove !use_sg code paths Boaz Harrosh
2007-09-20 21:12 ` Jeff Garzik
2007-09-18 15:48 ` [PATCH ver2 2/2] libata-scsi: convert to use the data buffer accessors Boaz Harrosh
2007-09-12 0:00 ` [PATCH 10/24] eata_pio.c: convert to accessors and !use_sg cleanup Boaz Harrosh
2007-09-12 0:00 ` [PATCH 11/24] a2091.c: " Boaz Harrosh
2007-09-12 0:01 ` [PATCH 12/24] a3000.c: " Boaz Harrosh
2007-09-12 0:02 ` [PATCH 13/24] aha1542.c: " Boaz Harrosh
2007-09-12 0:03 ` [PATCH 14/24] atp870u.c: " Boaz Harrosh
2007-09-12 0:04 ` [PATCH 15/24] fd_mcs.c: " Boaz Harrosh
2007-09-12 0:05 ` [PATCH 16/24] imm.c: " Boaz Harrosh
2007-09-12 0:06 ` [PATCH 17/24] in2000.c: " Boaz Harrosh
2007-09-12 0:07 ` [PATCH 18/24] ppa.c: " Boaz Harrosh
2007-09-12 0:07 ` [PATCH 19/24] wd33c93.c: " Boaz Harrosh
2007-09-12 0:09 ` Subject: [PATCH 20/24] scsi: esp family " Boaz Harrosh
2007-09-12 0:09 ` [PATCH 21/24] qlogicpti.c: " Boaz Harrosh
2007-10-10 18:25 ` [PATCH 21/24 ver2] " Boaz Harrosh
2007-10-10 22:58 ` David Miller
2007-09-12 0:10 ` Subject: [PATCH 22/24] Remove psi240i driver from kernel Boaz Harrosh
2007-09-12 0:11 ` [PATCH 23/24] wd7000.c - proper fix for boards without sg support Boaz Harrosh
2007-09-12 0:13 ` [PATCH 24/24] ide-scsi.c: convert to data accessors and !use_sg cleanup Boaz Harrosh
2007-09-17 11:04 ` Bartlomiej Zolnierkiewicz
2007-09-18 8:49 ` Boaz Harrosh
2007-09-18 9:03 ` [PATCH ver2 " Boaz Harrosh
2007-09-18 9:14 ` Christoph Hellwig
2007-09-18 10:24 ` Boaz Harrosh
2007-09-18 10:27 ` [PATCH 24/24 ver3 ] " Boaz Harrosh
2007-09-19 19:59 ` Bartlomiej Zolnierkiewicz
2007-09-12 16:00 ` [patchset 0/24] Lots of the Accessors patches " Maciej W. Rozycki
2007-09-17 10:46 ` Bartlomiej Zolnierkiewicz
2007-09-17 11:36 ` Boaz Harrosh
2007-09-17 13:51 ` James Bottomley
2007-09-17 20:05 ` Bartlomiej Zolnierkiewicz
2007-09-17 20:57 ` Jeff Garzik
2007-09-17 21:00 ` James Bottomley
2007-09-17 21:05 ` Jeff Garzik
2007-10-10 18:24 ` Boaz Harrosh
2007-10-10 19:14 ` Matthew Wilcox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46E72B3D.7060408@panasas.com \
--to=bharrosh@panasas.com \
--cc=James.Bottomley@SteelEye.com \
--cc=fujita.tomonori@lab.ntt.co.jp \
--cc=gregkh@suse.de \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).