From: Tony Battersby <tonyb@cybernetics.com>
To: Willy Tarreau <w@1wt.eu>
Cc: matthew@wil.cx, linux-scsi@vger.kernel.org,
James.Bottomley@HansenPartnership.com, protasnb@gmail.com,
bugme-daemon@bugzilla.kernel.org
Subject: Re: [Bug 3680] sym53c8xx_2 SMP deadlock on driver load
Date: Wed, 17 Oct 2007 12:22:11 -0400 [thread overview]
Message-ID: <471636B3.10907@cybernetics.com> (raw)
In-Reply-To: <20071017155256.GA2820@1wt.eu>
This patch fixes two problems with sym53c8xx_2.o in 2.4.x kernels:
1) A system hang when loading sym53c8xx_2.o on a SMP system with two
dual-channel LSI HBAs (http://bugzilla.kernel.org/show_bug.cgi?id=3680)
2) A function improperly marked __init.
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
---
--- linux-2.4.35/drivers/scsi/sym53c8xx_2/sym_glue.c.orig 2007-10-17 12:07:37.000000000 -0400
+++ linux-2.4.35/drivers/scsi/sym53c8xx_2/sym_glue.c 2007-10-17 12:08:32.000000000 -0400
@@ -224,15 +224,26 @@ static u_long __init pci_map_mem(u_long
{
u_long page_base = ((u_long) base) & PAGE_MASK;
u_long page_offs = ((u_long) base) - page_base;
- u_long page_remapped = (u_long) ioremap(page_base, page_offs+size);
+ u_long page_remapped;
+
+ spin_unlock_irq(&io_request_lock);
+ page_remapped = (u_long) ioremap(page_base, page_offs+size);
+ spin_lock_irq(&io_request_lock);
return page_remapped? (page_remapped + page_offs) : 0UL;
}
-static void __init pci_unmap_mem(u_long vaddr, u_long size)
-{
- if (vaddr)
+static void pci_unmap_mem(u_long vaddr,
+ u_long size,
+ int holding_io_request_lock)
+{
+ if (vaddr) {
+ if (holding_io_request_lock)
+ spin_unlock_irq(&io_request_lock);
iounmap((void *) (vaddr & PAGE_MASK));
+ if (holding_io_request_lock)
+ spin_lock_irq(&io_request_lock);
+ }
}
#endif
@@ -1840,7 +1851,7 @@ static int sym53c8xx_proc_info(char *buf
/*
* Free controller resources.
*/
-static void sym_free_resources(hcb_p np)
+static void sym_free_resources(hcb_p np, int holding_io_request_lock)
{
/*
* Free O/S specific resources.
@@ -1851,9 +1862,13 @@ static void sym_free_resources(hcb_p np)
release_region(np->s.io_port, np->s.io_ws);
#ifndef SYM_OPT_NO_BUS_MEMORY_MAPPING
if (np->s.mmio_va)
- pci_unmap_mem(np->s.mmio_va, np->s.io_ws);
+ pci_unmap_mem(np->s.mmio_va,
+ np->s.io_ws,
+ holding_io_request_lock);
if (np->s.ram_va)
- pci_unmap_mem(np->s.ram_va, np->ram_ws);
+ pci_unmap_mem(np->s.ram_va,
+ np->ram_ws,
+ holding_io_request_lock);
#endif
/*
* Free O/S independant resources.
@@ -2155,7 +2170,7 @@ attach_failed:
if (!instance) return -1;
printf_info("%s: giving up ...\n", sym_name(np));
if (np)
- sym_free_resources(np);
+ sym_free_resources(np, 1);
scsi_unregister(instance);
return -1;
@@ -2197,7 +2212,7 @@ static void __init sym_get_nvram(sym_dev
#ifdef SYM_CONF_IOMAPPED
release_region(devp->s.io_port, 128);
#else
- pci_unmap_mem((u_long) devp->s.mmio_va, 128ul);
+ pci_unmap_mem((u_long) devp->s.mmio_va, 128ul, 1);
#endif
}
#endif /* SYM_CONF_NVRAM_SUPPORT */
@@ -2551,7 +2566,7 @@ sym53c8xx_pci_init(Scsi_Host_Template *t
ram_ptr = pci_map_mem(base_2_c, ram_size);
if (ram_ptr) {
ram_val = readl_raw(ram_ptr + ram_size - 16);
- pci_unmap_mem(ram_ptr, ram_size);
+ pci_unmap_mem(ram_ptr, ram_size, 1);
if (ram_val == 0x52414944) {
printf_info("%s: not initializing, "
"driven by RAID controller.\n",
@@ -2980,7 +2995,7 @@ static int sym_detach(hcb_p np)
/*
* Free host resources
*/
- sym_free_resources(np);
+ sym_free_resources(np, 0);
return 1;
}
next prev parent reply other threads:[~2007-10-17 16:22 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20071017013045.A19ED108036@picon.linux-foundation.org>
2007-10-17 14:53 ` [Bug 3680] sym53c8xx_2 SMP deadlock on driver load Tony Battersby
2007-10-17 15:20 ` Willy Tarreau
2007-10-17 15:44 ` Tony Battersby
2007-10-17 15:52 ` Willy Tarreau
2007-10-17 16:22 ` Tony Battersby [this message]
2007-10-17 16:27 ` Matthew Wilcox
2007-10-17 18:46 ` Willy Tarreau
2007-10-17 20:12 ` Matthew Wilcox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=471636B3.10907@cybernetics.com \
--to=tonyb@cybernetics.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=bugme-daemon@bugzilla.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=matthew@wil.cx \
--cc=protasnb@gmail.com \
--cc=w@1wt.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).