linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Boaz Harrosh <bharrosh@panasas.com>
To: James Bottomley <James.Bottomley@SteelEye.com>,
	Jens Axboe <jens.axboe@oracle.com>,
	Mike Christie <michaelc@cs.wisc.edu>,
	linux-scsi <linux-scsi@vger.kernel.org>
Cc: Benny Halevy <bhalevy@panasas.com>, Matthew Wilcox <matthew@wil.cx>
Subject: [PATCH 2/2] block layer varlen-cdb
Date: Tue, 18 Dec 2007 15:42:18 +0200	[thread overview]
Message-ID: <4767CE3A.3010501@panasas.com> (raw)
In-Reply-To: <4767CC3E.8000309@panasas.com>


  - add varlen_cdb and varlen_cdb_len to hold a large user cdb
    if needed. They start as empty. Allocation of buffer must
    be done by user and held until request execution is done.
  - Since there can be either a fix_length command up to 16 bytes
    or a variable_length, larger then 16 bytes, commands but never
    both, we hold the two types in a union to save space. The
    presence of varlen_cdb_len and cmd_len==0 signals a varlen_cdb
    mode.
  - Please use added rq_{set,get}_varlen_cdb() to set every thing
    up in a way that will not confuse drivers that do not support
    varlen_cdb's.
  - Note that this patch does not add any size to struct request
    since the unsigned cmd_len is split here to 2 ushorts, which
    is more then enough.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
---
 block/ll_rw_blk.c      |    2 ++
 include/linux/blkdev.h |   27 +++++++++++++++++++++++++--
 2 files changed, 27 insertions(+), 2 deletions(-)

diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c
index 8b91994..e80179b 100644
--- a/block/ll_rw_blk.c
+++ b/block/ll_rw_blk.c
@@ -261,6 +261,8 @@ static void rq_init(struct request_queue *q, struct request *rq)
 	rq->end_io_data = NULL;
 	rq->completion_data = NULL;
 	rq->next_rq = NULL;
+	rq->varlen_cdb_len = 0;
+	rq->varlen_cdb = NULL;
 }
 
 /**
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index d18ee67..aa3090c 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -287,8 +287,15 @@ struct request {
 	/*
 	 * when request is used as a packet command carrier
 	 */
-	unsigned int cmd_len;
-	unsigned char cmd[BLK_MAX_CDB];
+	unsigned short cmd_len;
+	unsigned short varlen_cdb_len;  /* length of varlen_cdb buffer */
+	union {
+		unsigned char cmd[BLK_MAX_CDB];
+		unsigned char *varlen_cdb;/* an optional variable-length cdb.
+	                                   * points to a user buffer that must
+	                                   * be valid until end of request
+	                                   */
+	};
 
 	unsigned int data_len;
 	unsigned int sense_len;
@@ -550,6 +557,22 @@ enum {
 #define rq_is_sync(rq)		(rq_data_dir((rq)) == READ || (rq)->cmd_flags & REQ_RW_SYNC)
 #define rq_is_meta(rq)		((rq)->cmd_flags & REQ_RW_META)
 
+static inline void rq_set_varlen_cdb(struct request *rq, u8 *cdb, short cdb_len)
+{
+	rq->cmd_len = 0; /* Make sure legacy drivers don't get confused */
+	rq->varlen_cdb_len = cdb_len;
+	rq->varlen_cdb = cdb;
+}
+
+/* If ! a varlen_cdb than return NULL */
+static inline u8 *rq_get_varlen_cdb(struct request *rq)
+{
+	if (!rq->cmd_len && rq->varlen_cdb_len)
+		return rq->varlen_cdb;
+	else
+		return NULL;
+}
+
 static inline int blk_queue_full(struct request_queue *q, int rw)
 {
 	if (rw == READ)
-- 
1.5.3.3



  parent reply	other threads:[~2007-12-18 13:43 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-12-18 13:33 [PATCHSET 0/3] varlen extended and vendor-specific cdbs Boaz Harrosh
2007-12-18 13:38 ` [PATCH 1/3] Let scsi_cmnd->cmnd use request->cmd buffer Boaz Harrosh
2007-12-18 13:42 ` Boaz Harrosh [this message]
2007-12-18 13:45 ` [PATCH 3/3] scsi: varlen extended and vendor-specific cdbs Boaz Harrosh
2007-12-20 19:39 ` [PATCHSET 0/3] " Boaz Harrosh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4767CE3A.3010501@panasas.com \
    --to=bharrosh@panasas.com \
    --cc=James.Bottomley@SteelEye.com \
    --cc=bhalevy@panasas.com \
    --cc=jens.axboe@oracle.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=matthew@wil.cx \
    --cc=michaelc@cs.wisc.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).