From mboxrd@z Thu Jan 1 00:00:00 1970 From: Keith Hopkins Subject: Re: aic94xx: failing on high load (another data point) Date: Wed, 30 Jan 2008 18:59:34 +0800 Message-ID: <47A05896.40900@hopnet.net> References: <479FB3ED.3080401@hopnet.net> <20080130091403.GA14887@alaris.suse.cz> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Return-path: Received: from [221.218.196.247] ([221.218.196.247]:53797 "EHLO mail.hopnet.net" rhost-flags-FAIL-FAIL-OK-OK) by vger.kernel.org with ESMTP id S1752665AbYA3Ld6 (ORCPT ); Wed, 30 Jan 2008 06:33:58 -0500 In-Reply-To: <20080130091403.GA14887@alaris.suse.cz> Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: Jan Sembera Cc: linux-scsi@vger.kernel.org On 01/30/2008 05:14 PM, Jan Sembera wrote: > > We tried firmware versions V28, V30, and even V32 that is, as > far as I know, not yet available on adaptec website. All of them were > unfortunately displaying exactly the same behaviour :-(. Did you get your > SAS controller working? And if so, with which firmware was that? > V28. My controller functions well with a single drive (low-medium load). Unfortunately, all attempts to get the mirrors in sync fail and usually hang the whole box. --Keith