From: Boaz Harrosh <bharrosh@panasas.com>
To: Mike Christie <michaelc@cs.wisc.edu>,
linux-scsi <linux-scsi@vger.kernel.org>,
open-iscsi@googlegroups.com, Pete Wyckoff <pw@osc.edu>
Cc: Benny Halevy <bhalevy@panasas.com>, Daniel.E.Messinger@seagate.com
Subject: [PATCH 1/3] iscsi: extended cdb support
Date: Thu, 31 Jan 2008 22:25:16 +0200 [thread overview]
Message-ID: <47A22EAC.8030706@panasas.com> (raw)
In-Reply-To: <47A20E85.6040906@panasas.com>
Support for extended CDBs in iscsi.
All we need is to check if command spills over 16 bytes then allocate
an iscsi-extended-header for the leftovers.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
---
drivers/scsi/iscsi_tcp.c | 2 +-
drivers/scsi/libiscsi.c | 56 ++++++++++++++++++++++++++++++++++++++++----
include/scsi/iscsi_proto.h | 6 +++-
3 files changed, 56 insertions(+), 8 deletions(-)
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 8a17867..ee7acfa 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -1975,7 +1975,7 @@ static struct iscsi_transport iscsi_tcp_transport = {
.host_template = &iscsi_sht,
.conndata_size = sizeof(struct iscsi_conn),
.max_conn = 1,
- .max_cmd_len = 16,
+ .max_cmd_len = 260,
/* session management */
.create_session = iscsi_tcp_session_create,
.destroy_session = iscsi_tcp_session_destroy,
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index cfffabd..498cea3 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -137,6 +137,45 @@ static int iscsi_add_hdr(struct iscsi_cmd_task *ctask, unsigned len)
return 0;
}
+/*
+ * make an extended cdb AHS
+ */
+static int iscsi_prep_ecdb_ahs(struct iscsi_cmd_task *ctask)
+{
+ struct scsi_cmnd *cmd = ctask->sc;
+ unsigned rlen, pad_len;
+ unsigned short ahslength;
+ struct iscsi_ecdb_ahdr *ecdb_ahdr;
+ int rc;
+
+ ecdb_ahdr = iscsi_next_hdr(ctask);
+ rlen = cmd->cmd_len - ISCSI_CDB_SIZE;
+
+ BUG_ON(rlen > sizeof(ecdb_ahdr->ecdb));
+ ahslength = rlen + sizeof(ecdb_ahdr->reserved);
+
+ pad_len = iscsi_padding(rlen);
+
+ rc = iscsi_add_hdr(ctask, sizeof(ecdb_ahdr->ahslength) +
+ sizeof(ecdb_ahdr->ahstype) + ahslength + pad_len);
+ if (rc)
+ return rc;
+
+ if (pad_len)
+ memset(&ecdb_ahdr->ecdb[rlen], 0, pad_len);
+
+ ecdb_ahdr->ahslength = cpu_to_be16(ahslength);
+ ecdb_ahdr->ahstype = ISCSI_AHSTYPE_CDB;
+ ecdb_ahdr->reserved = 0;
+ memcpy(ecdb_ahdr->ecdb, cmd->cmnd + ISCSI_CDB_SIZE, rlen);
+
+ debug_scsi("iscsi_prep_ecdb_ahs: varlen_cdb_len %d "
+ "rlen %d pad_len %d ahs_length %d iscsi_headers_size %u\n",
+ cmd->cmd_len, rlen, pad_len, ahslength, ctask->hdr_len);
+
+ return 0;
+}
+
/**
* iscsi_prep_scsi_cmd_pdu - prep iscsi scsi cmd pdu
* @ctask: iscsi cmd task
@@ -150,7 +189,7 @@ static int iscsi_prep_scsi_cmd_pdu(struct iscsi_cmd_task *ctask)
struct iscsi_session *session = conn->session;
struct iscsi_cmd *hdr = ctask->hdr;
struct scsi_cmnd *sc = ctask->sc;
- unsigned hdrlength;
+ unsigned hdrlength, cmd_len;
int rc;
ctask->hdr_len = 0;
@@ -165,10 +204,17 @@ static int iscsi_prep_scsi_cmd_pdu(struct iscsi_cmd_task *ctask)
hdr->cmdsn = cpu_to_be32(session->cmdsn);
session->cmdsn++;
hdr->exp_statsn = cpu_to_be32(conn->exp_statsn);
- memcpy(hdr->cdb, sc->cmnd, sc->cmd_len);
- if (sc->cmd_len < MAX_COMMAND_SIZE)
- memset(&hdr->cdb[sc->cmd_len], 0,
- MAX_COMMAND_SIZE - sc->cmd_len);
+ cmd_len = sc->cmd_len;
+ if (cmd_len < ISCSI_CDB_SIZE)
+ memset(&hdr->cdb[cmd_len], 0,
+ ISCSI_CDB_SIZE - cmd_len);
+ else if (cmd_len > ISCSI_CDB_SIZE) {
+ rc = iscsi_prep_ecdb_ahs(ctask);
+ if (rc)
+ return rc;
+ cmd_len = ISCSI_CDB_SIZE;
+ }
+ memcpy(hdr->cdb, sc->cmnd, cmd_len);
ctask->imm_count = 0;
if (sc->sc_data_direction == DMA_TO_DEVICE) {
diff --git a/include/scsi/iscsi_proto.h b/include/scsi/iscsi_proto.h
index 5ffec8a..e0593bf 100644
--- a/include/scsi/iscsi_proto.h
+++ b/include/scsi/iscsi_proto.h
@@ -112,6 +112,7 @@ struct iscsi_ahs_hdr {
#define ISCSI_AHSTYPE_CDB 1
#define ISCSI_AHSTYPE_RLENGTH 2
+#define ISCSI_CDB_SIZE 16
/* iSCSI PDU Header */
struct iscsi_cmd {
@@ -125,7 +126,7 @@ struct iscsi_cmd {
__be32 data_length;
__be32 cmdsn;
__be32 exp_statsn;
- uint8_t cdb[16]; /* SCSI Command Block */
+ uint8_t cdb[ISCSI_CDB_SIZE]; /* SCSI Command Block */
/* Additional Data (Command Dependent) */
};
@@ -154,7 +155,8 @@ struct iscsi_ecdb_ahdr {
__be16 ahslength; /* CDB length - 15, including reserved byte */
uint8_t ahstype;
uint8_t reserved;
- uint8_t ecdb[260 - 16]; /* 4-byte aligned extended CDB spillover */
+ /* 4-byte aligned extended CDB spillover */
+ uint8_t ecdb[260 - ISCSI_CDB_SIZE];
};
/* SCSI Response Header */
--
1.5.3.3
next prev parent reply other threads:[~2008-01-31 20:26 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-31 18:08 [PATCH 0/3] iscsi bidi & varlen support Boaz Harrosh
2008-01-31 20:25 ` Boaz Harrosh [this message]
2008-01-31 20:29 ` [PATCH 2/3] iscsi: bidi support - libiscsi Boaz Harrosh
[not found] ` <47A22FC4.2020804-C4P08NqkoRlBDgjK7y7TUQ@public.gmane.org>
2008-02-11 15:43 ` Pete Wyckoff
2008-02-11 16:05 ` Boaz Harrosh
[not found] ` <47B0724C.2060108-C4P08NqkoRlBDgjK7y7TUQ@public.gmane.org>
2008-02-11 16:24 ` Pete Wyckoff
2008-01-31 20:31 ` [PATCH 3/3] iscsi: bidi support - iscsi_tcp Boaz Harrosh
2008-02-12 20:12 ` [PATCH 0/3] iscsi bidi & varlen support Pete Wyckoff
2008-02-12 20:17 ` Pete Wyckoff
2008-02-18 15:39 ` Boaz Harrosh
2008-02-18 16:03 ` Pete Wyckoff
2008-02-18 15:08 ` [PATCH 0/3 ver2] " Boaz Harrosh
2008-02-18 15:16 ` [PATCH 1/3 ver2] iscsi: extended cdb support Boaz Harrosh
2008-02-18 15:22 ` [PATCH 2/3 ver2] iscsi: bidi support - libiscsi Boaz Harrosh
2008-02-18 15:27 ` [PATCH 3/3 ver2] iscsi: bidi support - iscsi_tcp Boaz Harrosh
2008-02-18 17:22 ` [PATCH 0/3 ver2] iscsi bidi & varlen support James Bottomley
2008-02-18 17:33 ` Boaz Harrosh
-- strict thread matches above, loose matches on Subject: below --
2008-04-18 15:11 iscsi update for 2.6.26 michaelc
2008-04-18 15:11 ` [PATCH 1/3] iscsi: extended cdb support michaelc
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47A22EAC.8030706@panasas.com \
--to=bharrosh@panasas.com \
--cc=Daniel.E.Messinger@seagate.com \
--cc=bhalevy@panasas.com \
--cc=linux-scsi@vger.kernel.org \
--cc=michaelc@cs.wisc.edu \
--cc=open-iscsi@googlegroups.com \
--cc=pw@osc.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).