* Re: [Bugme-new] [Bug 10226] New: BusLogic Flashpoint SCSI Adapter not working with x86_64 kernels [not found] <bug-10226-10286@http.bugzilla.kernel.org/> @ 2008-03-11 20:44 ` Andrew Morton 2008-03-12 11:03 ` Boaz Harrosh 2008-03-12 11:29 ` [Bugme-new] [Bug 10226] New: " James Bottomley 0 siblings, 2 replies; 14+ messages in thread From: Andrew Morton @ 2008-03-11 20:44 UTC (permalink / raw) To: James Bottomley; +Cc: bugme-daemon, linux-scsi, us- I thought that scsi-related bugzilla reports were being autosent to linux-scsi but afacit that isn't working. Is it supposed to be? Anyway, have a bug! We don't appear to have a buslogic maintainer? On Tue, 11 Mar 2008 13:24:49 -0700 (PDT) bugme-daemon@bugzilla.kernel.org wrote: > http://bugzilla.kernel.org/show_bug.cgi?id=10226 > > Summary: BusLogic Flashpoint SCSI Adapter not working with x86_64 > kernels > Product: SCSI Drivers > Version: 2.5 > KernelVersion: 2.6.24.3 > Platform: All > OS/Version: Linux > Tree: Mainline > Status: NEW > Severity: normal > Priority: P1 > Component: BUSLOGIC > AssignedTo: scsi_drivers-buslogic@kernel-bugs.osdl.org > ReportedBy: us-@gmx.de > > > Latest working kernel version: unknown > > Earliest failing kernel version: unknown (but 2.6.18 fails, too) > > Distribution: Debian Etch > > Hardware Environment: BusLogic Flashpoint BT-950 UW-SCSI on ASUS M2NPV-VM with > Athlon64 Brisbane > > Software Environment: Minimal Debian installation (just the netinstall image > plus build environment to be able to build the kernel) > > Problem Description: > BusLogic Flashpoint Adapter doesn't work with kernels compiled for x86_64. > 'dmesg' shows > > BusLogic: FlashPoint Host Adapter detected at PCI Bus 4 Device 8 > BusLogic: I/O Address 0xCC00 PCI Address 0xFDBFE000, irq 16, but FlashPoint > BusLogic: support was omitted in this kernel configuration. > > even though CONFIG_SCSI_OMIT_FLASHPOINT was not set. > The SCSi Adapter works fine with a kernel compiled with the same configuration > for i686. 'dmesg' in that case shows > > SCSI subsystem initialized > ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 > ACPI: PCI Interrupt 0000:04:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> > IRQ > 18 > scsi: ***** BusLogic SCSI Driver Version 2.1.16 of 18 July 2002 ***** > scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com> > scsi0: Configuring BusLogic Model BT-950 PCI Wide Ultra SCSI Host Adapter > scsi0: Firmware Version: 5.02, I/O Address: 0xCC00, IRQ Channel: 18/Level > scsi0: PCI Bus: 4, Device: 8, Address: 0xFDBFE000, Host Adapter SCSI ID: 7 > scsi0: Parity Checking: Enabled, Extended Translation: Enabled > scsi0: Synchronous Negotiation: FSFFFFN#FFFFFFFF, Wide Negotiation: Enabled > scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled > scsi0: Driver Queue Depth: 255, Scatter/Gather Limit: 128 segments > scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3 > scsi0: SCSI Bus Termination: High Enabled, SCAM: Disabled > scsi0: *** BusLogic BT-950 Initialized Successfully *** > scsi0 : BusLogic BT-950 > > Steps to reproduce: > Try using a Buslogic Flashpoint SCSI Adapter on a kernel built for x86_64. > > Additional info: > 'lspci' shows > 04:08.0 SCSI storage controller: BusLogic Flashpoint LT (rev 01) > > The .config was pretty much what I got by calling 'make menuconfig' in a virgin > kernel source tree. > > The complete 'dmesg' output is: > Linux version 2.6.24.3-64bit (root@speddo) (gcc version 4.1.2 20061115 > (prerelease) (Debian 4.1.1-21)) #2 SMP Tue Mar 11 19:54:11 CET 2008 > Command line: root=/dev/hda13 ro > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f000 (usable) > BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 00000000cdee0000 (usable) > BIOS-e820: 00000000cdee0000 - 00000000cdee3000 (ACPI NVS) > BIOS-e820: 00000000cdee3000 - 00000000cdef0000 (ACPI data) > BIOS-e820: 00000000cdef0000 - 00000000cdf00000 (reserved) > BIOS-e820: 00000000ce000000 - 00000000d0000000 (reserved) > BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) > BIOS-e820: 0000000100000000 - 0000000130000000 (usable) > Entering add_active_range(0, 0, 159) 0 entries of 3200 used > Entering add_active_range(0, 256, 843488) 1 entries of 3200 used > Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used > end_pfn_map = 1245184 > DMI 2.4 present. > ACPI: RSDP 000F7530, 0024 (r2 Nvidia) > ACPI: XSDT CDEE30C0, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) > ACPI: FACP CDEEB4C0, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0) > ACPI: DSDT CDEE3240, 821D (r1 NVIDIA ASUSACPI 1000 MSFT 3000000) > ACPI: FACS CDEE0000, 0040 > ACPI: SSDT CDEEB6C0, 0206 (r1 PTLTD POWERNOW 1 LTP 1) > ACPI: HPET CDEEB940, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98) > ACPI: MCFG CDEEB9C0, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) > ACPI: APIC CDEEB600, 007C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) > Scanning NUMA topology in Northbridge 24 > CPU has 2 num_cores > No NUMA configuration found > Faking a node at 0000000000000000-0000000130000000 > Entering add_active_range(0, 0, 159) 0 entries of 3200 used > Entering add_active_range(0, 256, 843488) 1 entries of 3200 used > Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used > Bootmem setup node 0 0000000000000000-0000000130000000 > Zone PFN ranges: > DMA 0 -> 4096 > DMA32 4096 -> 1048576 > Normal 1048576 -> 1245184 > Movable zone start PFN for each node > early_node_map[3] active PFN ranges > 0: 0 -> 159 > 0: 256 -> 843488 > 0: 1048576 -> 1245184 > On node 0 totalpages: 1039999 > DMA zone: 56 pages used for memmap > DMA zone: 1022 pages reserved > DMA zone: 2921 pages, LIFO batch:0 > DMA32 zone: 14280 pages used for memmap > DMA32 zone: 825112 pages, LIFO batch:31 > Normal zone: 2688 pages used for memmap > Normal zone: 193920 pages, LIFO batch:31 > Movable zone: 0 pages used for memmap > ACPI: PM-Timer IO Port: 0x4008 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > Processor #0 (Bootup-CPU) > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > Processor #1 > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) > ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > ACPI: IRQ14 used by override. > ACPI: IRQ15 used by override. > Setting APIC routing to flat > ACPI: HPET id: 0x10de8201 base: 0xfefff000 > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) > SMP: Allowing 2 CPUs, 0 hotplug CPUs > PERCPU: Allocating 33120 bytes of per cpu data > Built 1 zonelists in Node order, mobility grouping on. Total pages: 1021953 > Policy zone: Normal > Kernel command line: root=/dev/hda13 ro > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 32768 bytes) > Extended CMOS year: 2000 > hpet clockevent registered > TSC calibrated against HPET > Marking TSC unstable due to TSCs unsynchronized > time.c: Detected 2104.387 MHz processor. > Console: colour VGA+ 80x25 > console [tty0] enabled > Checking aperture... > CPU 0: aperture @ 4ea6000000 size 32 MB > Aperture too small (32 MB) > No AGP bridge found > Your BIOS doesn't leave a aperture memory hole > Please enable the IOMMU option in the BIOS setup > This costs you 64 MB of RAM > Mapping aperture over 65536 KB of RAM @ 4000000 > Memory: 4020884k/4980736k available (2086k kernel code, 139112k reserved, 999k > data, 312k init) > Calibrating delay using timer specific routine.. 4212.28 BogoMIPS (lpj=8424572) > Security Framework initialized > SELinux: Disabled at boot. > Capability LSM initialized > Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) > Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) > Mount-cache hash table entries: 256 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > CPU 0/0 -> Node 0 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > SMP alternatives: switching to UP code > ACPI: Core revision 20070126 > Using local APIC timer interrupts. > APIC timer calibration result 12526131 > Detected 12.526 MHz APIC timer. > SMP alternatives: switching to SMP code > Booting processor 1/2 APIC 0x1 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 4208.81 BogoMIPS (lpj=8417631) > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > CPU 1/1 -> Node 0 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01 > Brought up 2 CPUs > CPU0 attaching sched-domain: > domain 0: span 00000003 > groups: 00000001 00000002 > domain 1: span 00000003 > groups: 00000003 > CPU1 attaching sched-domain: > domain 0: span 00000003 > groups: 00000002 00000001 > domain 1: span 00000003 > groups: 00000003 > net_namespace: 120 bytes > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: Using MMCONFIG at e0000000 - efffffff > PCI: No mmconfig possible on device 00:18 > ACPI: EC: Look up EC in DSDT > ACPI: Interpreter enabled > ACPI: (supports S0 S1 S3 S5) > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Transparent bridge - 0000:00:10.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] > ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 *11 14 15) > ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 9 10 11 14 15) > ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 *10 11 14 15) > ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15) > ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) > ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 > ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 > ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. > ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. > ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 > ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 > ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 > ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) > pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) > pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) > pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) > pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) > pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) > pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) > pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) > pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active) > pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) > pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active) > pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (active) > pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) > pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) > pnpacpi: exceeded the max number of mem resources: 12 > pnp 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) > pnp: PnP ACPI: found 15 devices > ACPI: ACPI bus type pnp unregistered > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report > NET: Registered protocol family 8 > NET: Registered protocol family 20 > PCI-DMA: Disabling AGP. > PCI-DMA: aperture base @ 4000000 size 65536 KB > PCI-DMA: using GART IOMMU. > PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture > hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 > hpet0: 3 32-bit timers, 25000000 Hz > Time: hpet clocksource has been installed. > pnp: the driver 'system' has been registered > system 00:01: ioport range 0x4000-0x407f has been reserved > system 00:01: ioport range 0x4080-0x40ff has been reserved > system 00:01: ioport range 0x4400-0x447f has been reserved > system 00:01: ioport range 0x4480-0x44ff has been reserved > system 00:01: ioport range 0x4800-0x487f has been reserved > system 00:01: ioport range 0x4880-0x48ff has been reserved > system 00:01: ioport range 0x2000-0x207f has been reserved > system 00:01: ioport range 0x2080-0x20ff has been reserved > system 00:01: iomem range 0xce000000-0xcfffffff could not be reserved > system 00:01: driver attached > system 00:02: ioport range 0x4d0-0x4d1 has been reserved > system 00:02: ioport range 0x800-0x87f has been reserved > system 00:02: ioport range 0x290-0x297 has been reserved > system 00:02: driver attached > system 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved > system 00:0d: driver attached > system 00:0e: iomem range 0xd3800-0xd3fff has been reserved > system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved > system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved > system 00:0e: iomem range 0xfc000-0xfffff could not be reserved > system 00:0e: iomem range 0xfefff000-0xfefff0ff has been reserved > system 00:0e: iomem range 0xcdee0000-0xcdefffff could not be reserved > system 00:0e: iomem range 0xffff0000-0xffffffff has been reserved > system 00:0e: iomem range 0x0-0x9ffff could not be reserved > system 00:0e: iomem range 0x100000-0xcdedffff could not be reserved > system 00:0e: iomem range 0xcdef0000-0xcfeeffff could not be reserved > system 00:0e: iomem range 0xfec00000-0xfec00fff has been reserved > system 00:0e: iomem range 0xfee00000-0xfeefffff could not be reserved > system 00:0e: driver attached > PCI: Bridge: 0000:00:02.0 > IO window: b000-bfff > MEM window: fde00000-fdefffff > PREFETCH window: fdd00000-fddfffff > PCI: Bridge: 0000:00:03.0 > IO window: e000-efff > MEM window: fdc00000-fdcfffff > PREFETCH window: fd900000-fd9fffff > PCI: Bridge: 0000:00:04.0 > IO window: d000-dfff > MEM window: fd800000-fd8fffff > PREFETCH window: fd700000-fd7fffff > PCI: Bridge: 0000:00:10.0 > IO window: c000-cfff > MEM window: fdb00000-fdbfffff > PREFETCH window: fda00000-fdafffff > PCI: Setting latency timer of device 0000:00:02.0 to 64 > PCI: Setting latency timer of device 0000:00:03.0 to 64 > PCI: Setting latency timer of device 0000:00:04.0 to 64 > PCI: Setting latency timer of device 0000:00:10.0 to 64 > NET: Registered protocol family 2 > IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) > TCP established hash table entries: 524288 (order: 11, 8388608 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 524288 bind 65536) > TCP reno registered > checking if image is initramfs... it is > Freeing initrd memory: 1116k freed > audit: initializing netlink socket (disabled) > audit(1205268115.600:1): initialized > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > Boot video device is 0000:00:05.0 > PCI: Setting latency timer of device 0000:00:02.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:02.0:pcie00] > Allocate Port Service[0000:00:02.0:pcie03] > PCI: Setting latency timer of device 0000:00:03.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:03.0:pcie00] > Allocate Port Service[0000:00:03.0:pcie03] > PCI: Setting latency timer of device 0000:00:04.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:04.0:pcie00] > Allocate Port Service[0000:00:04.0:pcie03] > Real Time Clock Driver v1.12ac > hpet_resources: 0xfefff000 is busy > Linux agpgart interface v0.102 > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > pnp: the driver 'serial' has been registered > 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > serial 00:09: driver attached > 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > serial 00:0a: driver attached > RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize > pnp: the driver 'i8042 kbd' has been registered > i8042 kbd 00:0c: driver attached > pnp: the driver 'i8042 aux' has been registered > PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 > PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot > with i8042.nopnp > serio: i8042 KBD port at 0x60,0x64 irq 1 > mice: PS/2 mouse device common for all mice > TCP bic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > Freeing unused kernel memory: 312k freed > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > NFORCE-MCP51: IDE controller (0x10de:0x0265 rev 0xa1) at PCI slot 0000:00:0d.0 > NFORCE-MCP51: not 100% native mode: will probe irqs later > NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling workaround. > NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller > ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA, hdb:DMA > ide1: BM-DMA at 0xf408-0xf40f, BIOS settings: hdc:DMA, hdd:DMA > Probing IDE interface ide0... > input: AT Translated Set 2 keyboard as /class/input/input0 > hdb: HDS722516VLAT80, ATA DISK drive > hda: SAMSUNG SP2514N, ATA DISK drive > hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 > hda: UDMA/100 mode selected > hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 > hdb: UDMA/100 mode selected > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > hdc: PIONEER DVD-RW DVR-109, ATAPI CD/DVD-ROM drive > hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 > hdc: UDMA/66 mode selected > ide1 at 0x170-0x177,0x376 on irq 15 > hda: max request size: 512KiB > hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63 > hda: cache flushes supported > hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 > > hdb: max request size: 512KiB > hdb: 321672960 sectors (164696 MB) w/7938KiB Cache, CHS=20023/255/63 > hdb: cache flushes supported > hdb: hdb1 hdb2 > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > input: Power Button (FF) as /class/input/input1 > ACPI: Power Button (FF) [PWRF] > input: Power Button (CM) as /class/input/input2 > ACPI: Power Button (CM) [PWRB] > ACPI: Thermal Zone [THRM] (40 C) > input: PC Speaker as /class/input/input3 > ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver > ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 > ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> > IRQ 23 > PCI: Setting latency timer of device 0000:00:0b.0 to 64 > ohci_hcd 0000:00:0b.0: OHCI Host Controller > ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 > ohci_hcd 0000:00:0b.0: irq 23, io mem 0xfe02f000 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > SCSI subsystem initialized > ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 > ACPI: PCI Interrupt 0000:04:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> > IRQ 16 > BusLogic: FlashPoint Host Adapter detected at PCI Bus 4 Device 8 > BusLogic: I/O Address 0xCC00 PCI Address 0xFDBFE000, irq 16, but FlashPoint > BusLogic: support was omitted in this kernel configuration. > Floppy drive(s): fd0 is 1.44M > pnp: the driver 'parport_pc' has been registered > parport_pc 00:0b: reported by Plug and Play ACPI > parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] > FDC 0 is a post-1991 82077 > ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 > ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 22 (level, low) -> > IRQ 22 > PCI: Setting latency timer of device 0000:00:0b.1 to 64 > ehci_hcd 0000:00:0b.1: EHCI Host Controller > ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 > ehci_hcd 0000:00:0b.1: debug port 1 > PCI: cache line size of 64 is not supported by device 0000:00:0b.1 > ehci_hcd 0000:00:0b.1: irq 22, io mem 0xfe02e000 > ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 8 ports detected > ACPI: Fan [FAN] (on) > hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache > Uniform CD-ROM driver Revision: 3.20 > parport_pc 00:0b: driver attached > i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 > i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 > ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 > ACPI: PCI Interrupt 0000:04:05.0[A] -> Link [APC4] -> GSI 19 (level, low) -> > IRQ 19 > gameport: EMU10K1 is pci0000:04:09.1/gameport0, io 0xc400, speed 1037kHz > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fdbff000-fdbff7ff] > Max Packet=[2048] IR/IT contexts=[4/8] > forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. > ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 > ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 21 (level, low) -> > IRQ 21 > PCI: Setting latency timer of device 0000:00:14.0 to 64 > forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1b:fc:9f:66:58 > forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3 > ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 > ACPI: PCI Interrupt 0000:04:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> > IRQ 17 > ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20 > ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 20 (level, low) -> > IRQ 20 > PCI: Setting latency timer of device 0000:00:10.1 to 64 > usb 1-2: new low speed USB device using ohci_hcd and address 2 > usb 1-2: configuration #1 chosen from 1 choice > ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80001557022] > usb 1-4: new full speed USB device using ohci_hcd and address 3 > Adding 1959888k swap on /dev/hda7. Priority:-1 extents:1 across:1959888k > Adding 1004020k swap on /dev/hdb1. Priority:-2 extents:1 across:1004020k > EXT3 FS on hda13, internal journal > usb 1-4: configuration #1 chosen from 1 choice > usbcore: registered new interface driver hiddev > input: Logitech Optical USB Mouse as /class/input/input4 > input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:0b.0-2 > usbcore: registered new interface driver usbhid > drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver > usbcore: registered new interface driver snd-usb-audio > loop: module loaded > device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: > dm-devel@redhat.com > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > device-mapper: table: 254:0: linear: dm-linear: Device lookup failed > device-mapper: ioctl: error adding target to table > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > eth0: no IPv6 routers present > > > -- > Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email > ------- You are receiving this mail because: ------- > You are on the CC list for the bug, or are watching someone who is. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Bugme-new] [Bug 10226] New: BusLogic Flashpoint SCSI Adapter not working with x86_64 kernels 2008-03-11 20:44 ` [Bugme-new] [Bug 10226] New: BusLogic Flashpoint SCSI Adapter not working with x86_64 kernels Andrew Morton @ 2008-03-12 11:03 ` Boaz Harrosh 2008-03-12 18:20 ` Ulrich Schweitzer 2008-03-12 11:29 ` [Bugme-new] [Bug 10226] New: " James Bottomley 1 sibling, 1 reply; 14+ messages in thread From: Boaz Harrosh @ 2008-03-12 11:03 UTC (permalink / raw) To: Andrew Morton; +Cc: James Bottomley, bugme-daemon, linux-scsi, us- On Tue, Mar 11 2008 at 22:44 +0200, Andrew Morton <akpm@linux-foundation.org> wrote: > I thought that scsi-related bugzilla reports were being autosent to > linux-scsi but afacit that isn't working. Is it supposed to be? > > Anyway, have a bug! We don't appear to have a buslogic maintainer? > > On Tue, 11 Mar 2008 13:24:49 -0700 (PDT) bugme-daemon@bugzilla.kernel.org wrote: > >> http://bugzilla.kernel.org/show_bug.cgi?id=10226 >> >> Summary: BusLogic Flashpoint SCSI Adapter not working with x86_64 >> kernels >> Product: SCSI Drivers >> Version: 2.5 >> KernelVersion: 2.6.24.3 >> Platform: All >> OS/Version: Linux >> Tree: Mainline >> Status: NEW >> Severity: normal >> Priority: P1 >> Component: BUSLOGIC >> AssignedTo: scsi_drivers-buslogic@kernel-bugs.osdl.org >> ReportedBy: us-@gmx.de >> >> >> Latest working kernel version: unknown >> >> Earliest failing kernel version: unknown (but 2.6.18 fails, too) >> >> Distribution: Debian Etch >> >> Hardware Environment: BusLogic Flashpoint BT-950 UW-SCSI on ASUS M2NPV-VM with >> Athlon64 Brisbane >> >> Software Environment: Minimal Debian installation (just the netinstall image >> plus build environment to be able to build the kernel) >> >> Problem Description: >> BusLogic Flashpoint Adapter doesn't work with kernels compiled for x86_64. >> 'dmesg' shows >> >> BusLogic: FlashPoint Host Adapter detected at PCI Bus 4 Device 8 >> BusLogic: I/O Address 0xCC00 PCI Address 0xFDBFE000, irq 16, but FlashPoint >> BusLogic: support was omitted in this kernel configuration. >> >> even though CONFIG_SCSI_OMIT_FLASHPOINT was not set. >> The SCSi Adapter works fine with a kernel compiled with the same configuration >> for i686. 'dmesg' in that case shows >> >> SCSI subsystem initialized >> ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 >> ACPI: PCI Interrupt 0000:04:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> >> IRQ >> 18 >> scsi: ***** BusLogic SCSI Driver Version 2.1.16 of 18 July 2002 ***** >> scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com> >> scsi0: Configuring BusLogic Model BT-950 PCI Wide Ultra SCSI Host Adapter >> scsi0: Firmware Version: 5.02, I/O Address: 0xCC00, IRQ Channel: 18/Level >> scsi0: PCI Bus: 4, Device: 8, Address: 0xFDBFE000, Host Adapter SCSI ID: 7 >> scsi0: Parity Checking: Enabled, Extended Translation: Enabled >> scsi0: Synchronous Negotiation: FSFFFFN#FFFFFFFF, Wide Negotiation: Enabled >> scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled >> scsi0: Driver Queue Depth: 255, Scatter/Gather Limit: 128 segments >> scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3 >> scsi0: SCSI Bus Termination: High Enabled, SCAM: Disabled >> scsi0: *** BusLogic BT-950 Initialized Successfully *** >> scsi0 : BusLogic BT-950 >> >> Steps to reproduce: >> Try using a Buslogic Flashpoint SCSI Adapter on a kernel built for x86_64. >> >> Additional info: >> 'lspci' shows >> 04:08.0 SCSI storage controller: BusLogic Flashpoint LT (rev 01) >> >> The .config was pretty much what I got by calling 'make menuconfig' in a virgin >> kernel source tree. >> >> The complete 'dmesg' output is: >> Linux version 2.6.24.3-64bit (root@speddo) (gcc version 4.1.2 20061115 >> (prerelease) (Debian 4.1.1-21)) #2 SMP Tue Mar 11 19:54:11 CET 2008 >> Command line: root=/dev/hda13 ro >> BIOS-provided physical RAM map: >> BIOS-e820: 0000000000000000 - 000000000009f000 (usable) >> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) >> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) >> BIOS-e820: 0000000000100000 - 00000000cdee0000 (usable) >> BIOS-e820: 00000000cdee0000 - 00000000cdee3000 (ACPI NVS) >> BIOS-e820: 00000000cdee3000 - 00000000cdef0000 (ACPI data) >> BIOS-e820: 00000000cdef0000 - 00000000cdf00000 (reserved) >> BIOS-e820: 00000000ce000000 - 00000000d0000000 (reserved) >> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) >> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) >> BIOS-e820: 0000000100000000 - 0000000130000000 (usable) >> Entering add_active_range(0, 0, 159) 0 entries of 3200 used >> Entering add_active_range(0, 256, 843488) 1 entries of 3200 used >> Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used >> end_pfn_map = 1245184 >> DMI 2.4 present. >> ACPI: RSDP 000F7530, 0024 (r2 Nvidia) >> ACPI: XSDT CDEE30C0, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) >> ACPI: FACP CDEEB4C0, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0) >> ACPI: DSDT CDEE3240, 821D (r1 NVIDIA ASUSACPI 1000 MSFT 3000000) >> ACPI: FACS CDEE0000, 0040 >> ACPI: SSDT CDEEB6C0, 0206 (r1 PTLTD POWERNOW 1 LTP 1) >> ACPI: HPET CDEEB940, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98) >> ACPI: MCFG CDEEB9C0, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) >> ACPI: APIC CDEEB600, 007C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) >> Scanning NUMA topology in Northbridge 24 >> CPU has 2 num_cores >> No NUMA configuration found >> Faking a node at 0000000000000000-0000000130000000 >> Entering add_active_range(0, 0, 159) 0 entries of 3200 used >> Entering add_active_range(0, 256, 843488) 1 entries of 3200 used >> Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used >> Bootmem setup node 0 0000000000000000-0000000130000000 >> Zone PFN ranges: >> DMA 0 -> 4096 >> DMA32 4096 -> 1048576 >> Normal 1048576 -> 1245184 >> Movable zone start PFN for each node >> early_node_map[3] active PFN ranges >> 0: 0 -> 159 >> 0: 256 -> 843488 >> 0: 1048576 -> 1245184 >> On node 0 totalpages: 1039999 >> DMA zone: 56 pages used for memmap >> DMA zone: 1022 pages reserved >> DMA zone: 2921 pages, LIFO batch:0 >> DMA32 zone: 14280 pages used for memmap >> DMA32 zone: 825112 pages, LIFO batch:31 >> Normal zone: 2688 pages used for memmap >> Normal zone: 193920 pages, LIFO batch:31 >> Movable zone: 0 pages used for memmap >> ACPI: PM-Timer IO Port: 0x4008 >> ACPI: Local APIC address 0xfee00000 >> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) >> Processor #0 (Bootup-CPU) >> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) >> Processor #1 >> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) >> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) >> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) >> IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 >> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >> ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) >> ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) >> ACPI: IRQ0 used by override. >> ACPI: IRQ2 used by override. >> ACPI: IRQ9 used by override. >> ACPI: IRQ14 used by override. >> ACPI: IRQ15 used by override. >> Setting APIC routing to flat >> ACPI: HPET id: 0x10de8201 base: 0xfefff000 >> Using ACPI (MADT) for SMP configuration information >> Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) >> SMP: Allowing 2 CPUs, 0 hotplug CPUs >> PERCPU: Allocating 33120 bytes of per cpu data >> Built 1 zonelists in Node order, mobility grouping on. Total pages: 1021953 >> Policy zone: Normal >> Kernel command line: root=/dev/hda13 ro >> Initializing CPU#0 >> PID hash table entries: 4096 (order: 12, 32768 bytes) >> Extended CMOS year: 2000 >> hpet clockevent registered >> TSC calibrated against HPET >> Marking TSC unstable due to TSCs unsynchronized >> time.c: Detected 2104.387 MHz processor. >> Console: colour VGA+ 80x25 >> console [tty0] enabled >> Checking aperture... >> CPU 0: aperture @ 4ea6000000 size 32 MB >> Aperture too small (32 MB) >> No AGP bridge found >> Your BIOS doesn't leave a aperture memory hole >> Please enable the IOMMU option in the BIOS setup >> This costs you 64 MB of RAM >> Mapping aperture over 65536 KB of RAM @ 4000000 >> Memory: 4020884k/4980736k available (2086k kernel code, 139112k reserved, 999k >> data, 312k init) >> Calibrating delay using timer specific routine.. 4212.28 BogoMIPS (lpj=8424572) >> Security Framework initialized >> SELinux: Disabled at boot. >> Capability LSM initialized >> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) >> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) >> Mount-cache hash table entries: 256 >> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >> CPU: L2 Cache: 512K (64 bytes/line) >> CPU 0/0 -> Node 0 >> CPU: Physical Processor ID: 0 >> CPU: Processor Core ID: 0 >> SMP alternatives: switching to UP code >> ACPI: Core revision 20070126 >> Using local APIC timer interrupts. >> APIC timer calibration result 12526131 >> Detected 12.526 MHz APIC timer. >> SMP alternatives: switching to SMP code >> Booting processor 1/2 APIC 0x1 >> Initializing CPU#1 >> Calibrating delay using timer specific routine.. 4208.81 BogoMIPS (lpj=8417631) >> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >> CPU: L2 Cache: 512K (64 bytes/line) >> CPU 1/1 -> Node 0 >> CPU: Physical Processor ID: 0 >> CPU: Processor Core ID: 1 >> AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01 >> Brought up 2 CPUs >> CPU0 attaching sched-domain: >> domain 0: span 00000003 >> groups: 00000001 00000002 >> domain 1: span 00000003 >> groups: 00000003 >> CPU1 attaching sched-domain: >> domain 0: span 00000003 >> groups: 00000002 00000001 >> domain 1: span 00000003 >> groups: 00000003 >> net_namespace: 120 bytes >> NET: Registered protocol family 16 >> ACPI: bus type pci registered >> PCI: Using MMCONFIG at e0000000 - efffffff >> PCI: No mmconfig possible on device 00:18 >> ACPI: EC: Look up EC in DSDT >> ACPI: Interpreter enabled >> ACPI: (supports S0 S1 S3 S5) >> ACPI: Using IOAPIC for interrupt routing >> ACPI: PCI Root Bridge [PCI0] (0000:00) >> PCI: Transparent bridge - 0000:00:10.0 >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] >> ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 *11 14 15) >> ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 9 10 11 14 15) >> ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. >> ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. >> ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. >> ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. >> ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 *10 11 14 15) >> ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. >> ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. >> ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. >> ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15) >> ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. >> ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) >> ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. >> ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. >> ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. >> ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. >> ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. >> ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 11 14 15) *0, disabled. >> ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled. >> ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 >> ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 >> ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. >> ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. >> ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. >> ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. >> ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 >> ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. >> ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. >> ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. >> ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 >> ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. >> ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. >> ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 >> ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. >> ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. >> ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. >> ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. >> ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. >> ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. >> ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. >> Linux Plug and Play Support v0.97 (c) Adam Belay >> pnp: PnP ACPI init >> ACPI: bus type pnp registered >> pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) >> pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) >> pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) >> pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) >> pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) >> pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) >> pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) >> pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) >> pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active) >> pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) >> pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active) >> pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (active) >> pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) >> pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) >> pnpacpi: exceeded the max number of mem resources: 12 >> pnp 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) >> pnp: PnP ACPI: found 15 devices >> ACPI: ACPI bus type pnp unregistered >> usbcore: registered new interface driver usbfs >> usbcore: registered new interface driver hub >> usbcore: registered new device driver usb >> PCI: Using ACPI for IRQ routing >> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report >> NET: Registered protocol family 8 >> NET: Registered protocol family 20 >> PCI-DMA: Disabling AGP. >> PCI-DMA: aperture base @ 4000000 size 65536 KB >> PCI-DMA: using GART IOMMU. >> PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture >> hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 >> hpet0: 3 32-bit timers, 25000000 Hz >> Time: hpet clocksource has been installed. >> pnp: the driver 'system' has been registered >> system 00:01: ioport range 0x4000-0x407f has been reserved >> system 00:01: ioport range 0x4080-0x40ff has been reserved >> system 00:01: ioport range 0x4400-0x447f has been reserved >> system 00:01: ioport range 0x4480-0x44ff has been reserved >> system 00:01: ioport range 0x4800-0x487f has been reserved >> system 00:01: ioport range 0x4880-0x48ff has been reserved >> system 00:01: ioport range 0x2000-0x207f has been reserved >> system 00:01: ioport range 0x2080-0x20ff has been reserved >> system 00:01: iomem range 0xce000000-0xcfffffff could not be reserved >> system 00:01: driver attached >> system 00:02: ioport range 0x4d0-0x4d1 has been reserved >> system 00:02: ioport range 0x800-0x87f has been reserved >> system 00:02: ioport range 0x290-0x297 has been reserved >> system 00:02: driver attached >> system 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved >> system 00:0d: driver attached >> system 00:0e: iomem range 0xd3800-0xd3fff has been reserved >> system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved >> system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved >> system 00:0e: iomem range 0xfc000-0xfffff could not be reserved >> system 00:0e: iomem range 0xfefff000-0xfefff0ff has been reserved >> system 00:0e: iomem range 0xcdee0000-0xcdefffff could not be reserved >> system 00:0e: iomem range 0xffff0000-0xffffffff has been reserved >> system 00:0e: iomem range 0x0-0x9ffff could not be reserved >> system 00:0e: iomem range 0x100000-0xcdedffff could not be reserved >> system 00:0e: iomem range 0xcdef0000-0xcfeeffff could not be reserved >> system 00:0e: iomem range 0xfec00000-0xfec00fff has been reserved >> system 00:0e: iomem range 0xfee00000-0xfeefffff could not be reserved >> system 00:0e: driver attached >> PCI: Bridge: 0000:00:02.0 >> IO window: b000-bfff >> MEM window: fde00000-fdefffff >> PREFETCH window: fdd00000-fddfffff >> PCI: Bridge: 0000:00:03.0 >> IO window: e000-efff >> MEM window: fdc00000-fdcfffff >> PREFETCH window: fd900000-fd9fffff >> PCI: Bridge: 0000:00:04.0 >> IO window: d000-dfff >> MEM window: fd800000-fd8fffff >> PREFETCH window: fd700000-fd7fffff >> PCI: Bridge: 0000:00:10.0 >> IO window: c000-cfff >> MEM window: fdb00000-fdbfffff >> PREFETCH window: fda00000-fdafffff >> PCI: Setting latency timer of device 0000:00:02.0 to 64 >> PCI: Setting latency timer of device 0000:00:03.0 to 64 >> PCI: Setting latency timer of device 0000:00:04.0 to 64 >> PCI: Setting latency timer of device 0000:00:10.0 to 64 >> NET: Registered protocol family 2 >> IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) >> TCP established hash table entries: 524288 (order: 11, 8388608 bytes) >> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) >> TCP: Hash tables configured (established 524288 bind 65536) >> TCP reno registered >> checking if image is initramfs... it is >> Freeing initrd memory: 1116k freed >> audit: initializing netlink socket (disabled) >> audit(1205268115.600:1): initialized >> VFS: Disk quotas dquot_6.5.1 >> Dquot-cache hash table entries: 512 (order 0, 4096 bytes) >> io scheduler noop registered >> io scheduler anticipatory registered >> io scheduler deadline registered >> io scheduler cfq registered (default) >> Boot video device is 0000:00:05.0 >> PCI: Setting latency timer of device 0000:00:02.0 to 64 >> assign_interrupt_mode Found MSI capability >> Allocate Port Service[0000:00:02.0:pcie00] >> Allocate Port Service[0000:00:02.0:pcie03] >> PCI: Setting latency timer of device 0000:00:03.0 to 64 >> assign_interrupt_mode Found MSI capability >> Allocate Port Service[0000:00:03.0:pcie00] >> Allocate Port Service[0000:00:03.0:pcie03] >> PCI: Setting latency timer of device 0000:00:04.0 to 64 >> assign_interrupt_mode Found MSI capability >> Allocate Port Service[0000:00:04.0:pcie00] >> Allocate Port Service[0000:00:04.0:pcie03] >> Real Time Clock Driver v1.12ac >> hpet_resources: 0xfefff000 is busy >> Linux agpgart interface v0.102 >> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled >> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >> serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A >> pnp: the driver 'serial' has been registered >> 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >> serial 00:09: driver attached >> 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A >> serial 00:0a: driver attached >> RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize >> pnp: the driver 'i8042 kbd' has been registered >> i8042 kbd 00:0c: driver attached >> pnp: the driver 'i8042 aux' has been registered >> PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 >> PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot >> with i8042.nopnp >> serio: i8042 KBD port at 0x60,0x64 irq 1 >> mice: PS/2 mouse device common for all mice >> TCP bic registered >> NET: Registered protocol family 1 >> NET: Registered protocol family 17 >> Freeing unused kernel memory: 312k freed >> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 >> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx >> NFORCE-MCP51: IDE controller (0x10de:0x0265 rev 0xa1) at PCI slot 0000:00:0d.0 >> NFORCE-MCP51: not 100% native mode: will probe irqs later >> NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling workaround. >> NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller >> ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA, hdb:DMA >> ide1: BM-DMA at 0xf408-0xf40f, BIOS settings: hdc:DMA, hdd:DMA >> Probing IDE interface ide0... >> input: AT Translated Set 2 keyboard as /class/input/input0 >> hdb: HDS722516VLAT80, ATA DISK drive >> hda: SAMSUNG SP2514N, ATA DISK drive >> hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 >> hda: UDMA/100 mode selected >> hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 >> hdb: UDMA/100 mode selected >> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >> Probing IDE interface ide1... >> hdc: PIONEER DVD-RW DVR-109, ATAPI CD/DVD-ROM drive >> hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 >> hdc: UDMA/66 mode selected >> ide1 at 0x170-0x177,0x376 on irq 15 >> hda: max request size: 512KiB >> hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63 >> hda: cache flushes supported >> hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 > >> hdb: max request size: 512KiB >> hdb: 321672960 sectors (164696 MB) w/7938KiB Cache, CHS=20023/255/63 >> hdb: cache flushes supported >> hdb: hdb1 hdb2 >> kjournald starting. Commit interval 5 seconds >> EXT3-fs: mounted filesystem with ordered data mode. >> input: Power Button (FF) as /class/input/input1 >> ACPI: Power Button (FF) [PWRF] >> input: Power Button (CM) as /class/input/input2 >> ACPI: Power Button (CM) [PWRB] >> ACPI: Thermal Zone [THRM] (40 C) >> input: PC Speaker as /class/input/input3 >> ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver >> ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 >> ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> >> IRQ 23 >> PCI: Setting latency timer of device 0000:00:0b.0 to 64 >> ohci_hcd 0000:00:0b.0: OHCI Host Controller >> ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 >> ohci_hcd 0000:00:0b.0: irq 23, io mem 0xfe02f000 >> usb usb1: configuration #1 chosen from 1 choice >> hub 1-0:1.0: USB hub found >> hub 1-0:1.0: 8 ports detected >> SCSI subsystem initialized >> ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 >> ACPI: PCI Interrupt 0000:04:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> >> IRQ 16 >> BusLogic: FlashPoint Host Adapter detected at PCI Bus 4 Device 8 >> BusLogic: I/O Address 0xCC00 PCI Address 0xFDBFE000, irq 16, but FlashPoint >> BusLogic: support was omitted in this kernel configuration. >> Floppy drive(s): fd0 is 1.44M >> pnp: the driver 'parport_pc' has been registered >> parport_pc 00:0b: reported by Plug and Play ACPI >> parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] >> FDC 0 is a post-1991 82077 >> ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 >> ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 22 (level, low) -> >> IRQ 22 >> PCI: Setting latency timer of device 0000:00:0b.1 to 64 >> ehci_hcd 0000:00:0b.1: EHCI Host Controller >> ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 >> ehci_hcd 0000:00:0b.1: debug port 1 >> PCI: cache line size of 64 is not supported by device 0000:00:0b.1 >> ehci_hcd 0000:00:0b.1: irq 22, io mem 0xfe02e000 >> ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 >> usb usb2: configuration #1 chosen from 1 choice >> hub 2-0:1.0: USB hub found >> hub 2-0:1.0: 8 ports detected >> ACPI: Fan [FAN] (on) >> hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache >> Uniform CD-ROM driver Revision: 3.20 >> parport_pc 00:0b: driver attached >> i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 >> i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 >> ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 >> ACPI: PCI Interrupt 0000:04:05.0[A] -> Link [APC4] -> GSI 19 (level, low) -> >> IRQ 19 >> gameport: EMU10K1 is pci0000:04:09.1/gameport0, io 0xc400, speed 1037kHz >> ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fdbff000-fdbff7ff] >> Max Packet=[2048] IR/IT contexts=[4/8] >> forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. >> ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 >> ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 21 (level, low) -> >> IRQ 21 >> PCI: Setting latency timer of device 0000:00:14.0 to 64 >> forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1b:fc:9f:66:58 >> forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3 >> ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 >> ACPI: PCI Interrupt 0000:04:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> >> IRQ 17 >> ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20 >> ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 20 (level, low) -> >> IRQ 20 >> PCI: Setting latency timer of device 0000:00:10.1 to 64 >> usb 1-2: new low speed USB device using ohci_hcd and address 2 >> usb 1-2: configuration #1 chosen from 1 choice >> ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80001557022] >> usb 1-4: new full speed USB device using ohci_hcd and address 3 >> Adding 1959888k swap on /dev/hda7. Priority:-1 extents:1 across:1959888k >> Adding 1004020k swap on /dev/hdb1. Priority:-2 extents:1 across:1004020k >> EXT3 FS on hda13, internal journal >> usb 1-4: configuration #1 chosen from 1 choice >> usbcore: registered new interface driver hiddev >> input: Logitech Optical USB Mouse as /class/input/input4 >> input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:0b.0-2 >> usbcore: registered new interface driver usbhid >> drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver >> usbcore: registered new interface driver snd-usb-audio >> loop: module loaded >> device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: >> dm-devel@redhat.com >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> device-mapper: table: 254:0: linear: dm-linear: Device lookup failed >> device-mapper: ioctl: error adding target to table >> NET: Registered protocol family 10 >> lo: Disabled Privacy Extensions >> eth0: no IPv6 routers present >> >> >> -- >> Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email >> ------- You are receiving this mail because: ------- >> You are on the CC list for the bug, or are watching someone who is. > -- An attached config file could help. It looks like you need ISA_DMA_API && VIRT_TO_BUS enabled are they? ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Bugme-new] [Bug 10226] New: BusLogic Flashpoint SCSI Adapter not working with x86_64 kernels 2008-03-12 11:03 ` Boaz Harrosh @ 2008-03-12 18:20 ` Ulrich Schweitzer 2008-03-12 18:36 ` James Bottomley 0 siblings, 1 reply; 14+ messages in thread From: Ulrich Schweitzer @ 2008-03-12 18:20 UTC (permalink / raw) To: Boaz Harrosh; +Cc: Andrew Morton, James Bottomley, bugme-daemon, linux-scsi On Wednesday March 12 2008, Boaz Harrosh wrote: > An attached config file could help. > It looks like you need ISA_DMA_API && VIRT_TO_BUS enabled are they? They are both enabled, but consider that I didn't customize the kernel in any way besides changing the processor type to K8 and setting CONFIG_IKCONFIG and CONFIG_IKCONFIG_PROC. I don't know if I need the options you mentioned. I first noticed the problem with a Fedora kernel and compiled this one only to confirm that the problem exists in the vanilla kernel as well. Here is the complete .config: # # Automatically generated make config: don't edit # Linux kernel version: 2.6.24.3 # Tue Mar 11 19:24:58 2008 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_ZONE_DMA=y # CONFIG_QUICKLIST is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="-64bit" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set CONFIG_AUDIT=y # CONFIG_AUDITSYSCALL is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 # CONFIG_CGROUPS is not set CONFIG_FAIR_GROUP_SCHED=y CONFIG_FAIR_USER_SCHED=y # CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" # # Processor type and features # # CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_X86_VSMP is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set CONFIG_MK8=y # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_GENERIC_CPU is not set CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_GART_IOMMU=y CONFIG_CALGARY_IOMMU=y CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y CONFIG_SWIOTLB=y CONFIG_NR_CPUS=32 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_PREEMPT_BKL is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y CONFIG_MICROCODE=m CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=m CONFIG_X86_CPUID=m CONFIG_NUMA=y CONFIG_K8_NUMA=y CONFIG_X86_64_ACPI_NUMA=y # CONFIG_NUMA_EMU is not set CONFIG_NODES_SHIFT=6 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set CONFIG_DISCONTIGMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_MTRR=y # CONFIG_SECCOMP is not set # CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x200000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x200000 CONFIG_HOTPLUG_CPU=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_OUT_OF_LINE_PFN_TO_PAGE=y # # Power management options # CONFIG_PM=y CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP_SMP=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND_SMP_POSSIBLE=y CONFIG_SUSPEND=y CONFIG_HIBERNATION_SMP_POSSIBLE=y # CONFIG_HIBERNATION is not set CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y # CONFIG_ACPI_PROCFS is not set CONFIG_ACPI_PROCFS_POWER=y CONFIG_ACPI_SYSFS_POWER=y CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=m CONFIG_ACPI_BATTERY=m CONFIG_ACPI_BUTTON=m CONFIG_ACPI_FAN=m CONFIG_ACPI_DOCK=m # CONFIG_ACPI_BAY is not set CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=m CONFIG_ACPI_NUMA=y CONFIG_ACPI_ASUS=m CONFIG_ACPI_TOSHIBA=m CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=m CONFIG_ACPI_SBS=m # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=m # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=m # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m # # CPUFreq processor drivers # CONFIG_X86_ACPI_CPUFREQ=m CONFIG_X86_POWERNOW_K8=m CONFIG_X86_POWERNOW_K8_ACPI=y CONFIG_X86_SPEEDSTEP_CENTRINO=m # CONFIG_X86_P4_CLOCKMOD is not set # # shared options # # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_SPEEDSTEP_LIB is not set # CONFIG_CPU_IDLE is not set # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y # CONFIG_DMAR is not set CONFIG_PCIEPORTBUS=y CONFIG_HOTPLUG_PCI_PCIE=m CONFIG_PCIEAER=y CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set CONFIG_HT_IRQ=y CONFIG_ISA_DMA_API=y CONFIG_K8_NB=y CONFIG_PCCARD=m # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=m CONFIG_PCMCIA_LOAD_CIS=y CONFIG_PCMCIA_IOCTL=y CONFIG_CARDBUS=y # # PC-card bridges # CONFIG_YENTA=m CONFIG_YENTA_O2=y CONFIG_YENTA_RICOH=y CONFIG_YENTA_TI=y CONFIG_YENTA_ENE_TUNE=y CONFIG_YENTA_TOSHIBA=y CONFIG_PD6729=m CONFIG_I82092=m CONFIG_PCCARD_NONSTATIC=m CONFIG_HOTPLUG_PCI=m CONFIG_HOTPLUG_PCI_FAKE=m CONFIG_HOTPLUG_PCI_ACPI=m CONFIG_HOTPLUG_PCI_ACPI_IBM=m # CONFIG_HOTPLUG_PCI_CPCI is not set CONFIG_HOTPLUG_PCI_SHPC=m # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_IA32_EMULATION=y CONFIG_IA32_AOUT=y CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y # # Networking # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE=m CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_LRO=m CONFIG_INET_DIAG=m CONFIG_INET_TCP_DIAG=m CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=y CONFIG_TCP_CONG_CUBIC=m CONFIG_TCP_CONG_WESTWOOD=m CONFIG_TCP_CONG_HTCP=m CONFIG_TCP_CONG_HSTCP=m CONFIG_TCP_CONG_HYBLA=m CONFIG_TCP_CONG_VEGAS=m CONFIG_TCP_CONG_SCALABLE=m CONFIG_TCP_CONG_LP=m CONFIG_TCP_CONG_VENO=m # CONFIG_TCP_CONG_YEAH is not set # CONFIG_TCP_CONG_ILLINOIS is not set CONFIG_DEFAULT_BIC=y # CONFIG_DEFAULT_CUBIC is not set # CONFIG_DEFAULT_HTCP is not set # CONFIG_DEFAULT_VEGAS is not set # CONFIG_DEFAULT_WESTWOOD is not set # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="bic" # CONFIG_TCP_MD5SIG is not set CONFIG_IP_VS=m # CONFIG_IP_VS_DEBUG is not set CONFIG_IP_VS_TAB_BITS=12 # # IPVS transport protocol load balancing support # CONFIG_IP_VS_PROTO_TCP=y CONFIG_IP_VS_PROTO_UDP=y CONFIG_IP_VS_PROTO_ESP=y CONFIG_IP_VS_PROTO_AH=y # # IPVS scheduler # CONFIG_IP_VS_RR=m CONFIG_IP_VS_WRR=m CONFIG_IP_VS_LC=m CONFIG_IP_VS_WLC=m CONFIG_IP_VS_LBLC=m CONFIG_IP_VS_LBLCR=m CONFIG_IP_VS_DH=m CONFIG_IP_VS_SH=m CONFIG_IP_VS_SED=m CONFIG_IP_VS_NQ=m # # IPVS application helper # CONFIG_IP_VS_FTP=m CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m # CONFIG_IPV6_MIP6 is not set CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_NETLABEL is not set CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_BRIDGE_NETFILTER=y # # Core Netfilter Configuration # CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m # CONFIG_NF_CONNTRACK_ENABLED is not set # CONFIG_NF_CONNTRACK is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m # CONFIG_NETFILTER_XT_TARGET_DSCP is not set CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_TRACE is not set CONFIG_NETFILTER_XT_TARGET_SECMARK=m # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m # CONFIG_NETFILTER_XT_MATCH_DSCP is not set CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # # IP: Netfilter Configuration # CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # # IPv6: Netfilter Configuration (EXPERIMENTAL) # CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_AH=m # CONFIG_IP6_NF_MATCH_MH is not set CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m # # DECnet: Netfilter Configuration # CONFIG_DECNET_NF_GRABULATOR=m # # Bridge: Netfilter Configuration # CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m CONFIG_BRIDGE_EBT_T_NAT=m CONFIG_BRIDGE_EBT_802_3=m CONFIG_BRIDGE_EBT_AMONG=m CONFIG_BRIDGE_EBT_ARP=m CONFIG_BRIDGE_EBT_IP=m CONFIG_BRIDGE_EBT_LIMIT=m CONFIG_BRIDGE_EBT_MARK=m CONFIG_BRIDGE_EBT_PKTTYPE=m CONFIG_BRIDGE_EBT_STP=m CONFIG_BRIDGE_EBT_VLAN=m CONFIG_BRIDGE_EBT_ARPREPLY=m CONFIG_BRIDGE_EBT_DNAT=m CONFIG_BRIDGE_EBT_MARK_T=m CONFIG_BRIDGE_EBT_REDIRECT=m CONFIG_BRIDGE_EBT_SNAT=m CONFIG_BRIDGE_EBT_LOG=m CONFIG_BRIDGE_EBT_ULOG=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set CONFIG_IP_DCCP_CCID3=m CONFIG_IP_DCCP_TFRC_LIB=m # CONFIG_IP_DCCP_CCID3_DEBUG is not set CONFIG_IP_DCCP_CCID3_RTO=100 # # DCCP Kernel Hacking # # CONFIG_IP_DCCP_DEBUG is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y CONFIG_TIPC=m CONFIG_TIPC_ADVANCED=y CONFIG_TIPC_ZONES=3 CONFIG_TIPC_CLUSTERS=1 CONFIG_TIPC_NODES=255 CONFIG_TIPC_SLAVE_NODES=0 CONFIG_TIPC_PORTS=8191 CONFIG_TIPC_LOG=0 # CONFIG_TIPC_DEBUG is not set CONFIG_ATM=y CONFIG_ATM_CLIP=y # CONFIG_ATM_CLIP_NO_ICMP is not set CONFIG_ATM_LANE=m CONFIG_ATM_MPOA=m CONFIG_ATM_BR2684=m # CONFIG_ATM_BR2684_IPFILTER is not set CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m CONFIG_DECNET=m # CONFIG_DECNET_ROUTER is not set CONFIG_LLC=y CONFIG_LLC2=m CONFIG_IPX=m # CONFIG_IPX_INTERN is not set CONFIG_ATALK=m CONFIG_DEV_APPLETALK=m CONFIG_IPDDP=m CONFIG_IPDDP_ENCAP=y CONFIG_IPDDP_DECAP=y CONFIG_X25=m CONFIG_LAPB=m CONFIG_ECONET=m CONFIG_ECONET_AUNUDP=y CONFIG_ECONET_NATIVE=y CONFIG_WAN_ROUTER=m CONFIG_NET_SCHED=y # # Queueing/Scheduling # CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_ATM=m CONFIG_NET_SCH_PRIO=m # CONFIG_NET_SCH_RR is not set CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m CONFIG_NET_SCH_TBF=m CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m # # Classification # CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m CONFIG_NET_CLS_ROUTE4=m CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m CONFIG_CLS_U32_PERF=y CONFIG_CLS_U32_MARK=y CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m CONFIG_NET_EMATCH=y CONFIG_NET_EMATCH_STACK=32 CONFIG_NET_EMATCH_CMP=m CONFIG_NET_EMATCH_NBYTE=m CONFIG_NET_EMATCH_U32=m CONFIG_NET_EMATCH_META=m CONFIG_NET_EMATCH_TEXT=m CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=m CONFIG_NET_ACT_GACT=m CONFIG_GACT_PROB=y CONFIG_NET_ACT_MIRRED=m CONFIG_NET_ACT_IPT=m # CONFIG_NET_ACT_NAT is not set CONFIG_NET_ACT_PEDIT=m CONFIG_NET_ACT_SIMP=m # CONFIG_NET_CLS_POLICE is not set CONFIG_NET_CLS_IND=y CONFIG_NET_SCH_FIFO=y # # Network testing # CONFIG_NET_PKTGEN=m CONFIG_HAMRADIO=y # # Packet Radio protocols # CONFIG_AX25=m # CONFIG_AX25_DAMA_SLAVE is not set CONFIG_NETROM=m CONFIG_ROSE=m # # AX.25 network device drivers # CONFIG_MKISS=m CONFIG_6PACK=m CONFIG_BPQETHER=m CONFIG_BAYCOM_SER_FDX=m CONFIG_BAYCOM_SER_HDX=m CONFIG_BAYCOM_PAR=m CONFIG_YAM=m CONFIG_IRDA=m # # IrDA protocols # CONFIG_IRLAN=m CONFIG_IRNET=m CONFIG_IRCOMM=m # CONFIG_IRDA_ULTRA is not set # # IrDA options # CONFIG_IRDA_CACHE_LAST_LSAP=y CONFIG_IRDA_FAST_RR=y CONFIG_IRDA_DEBUG=y # # Infrared-port device drivers # # # SIR device drivers # CONFIG_IRTTY_SIR=m # # Dongle support # CONFIG_DONGLE=y CONFIG_ESI_DONGLE=m CONFIG_ACTISYS_DONGLE=m CONFIG_TEKRAM_DONGLE=m CONFIG_TOIM3232_DONGLE=m CONFIG_LITELINK_DONGLE=m CONFIG_MA600_DONGLE=m CONFIG_GIRBIL_DONGLE=m CONFIG_MCP2120_DONGLE=m CONFIG_OLD_BELKIN_DONGLE=m CONFIG_ACT200L_DONGLE=m # CONFIG_KINGSUN_DONGLE is not set # CONFIG_KSDAZZLE_DONGLE is not set # CONFIG_KS959_DONGLE is not set # # Old SIR device drivers # # # Old Serial dongle support # # # FIR device drivers # CONFIG_USB_IRDA=m CONFIG_SIGMATEL_FIR=m CONFIG_NSC_FIR=m CONFIG_WINBOND_FIR=m CONFIG_SMC_IRCC_FIR=m CONFIG_ALI_FIR=m CONFIG_VLSI_FIR=m CONFIG_VIA_FIR=m CONFIG_MCS_FIR=m CONFIG_BT=m CONFIG_BT_L2CAP=m CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m CONFIG_BT_BNEP_MC_FILTER=y CONFIG_BT_BNEP_PROTO_FILTER=y CONFIG_BT_CMTP=m CONFIG_BT_HIDP=m # # Bluetooth device drivers # CONFIG_BT_HCIUSB=m CONFIG_BT_HCIUSB_SCO=y # CONFIG_BT_HCIBTSDIO is not set CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y # CONFIG_BT_HCIUART_LL is not set CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m CONFIG_BT_HCIDTL1=m CONFIG_BT_HCIBT3C=m CONFIG_BT_HCIBLUECARD=m CONFIG_BT_HCIBTUART=m CONFIG_BT_HCIVHCI=m CONFIG_AF_RXRPC=m # CONFIG_AF_RXRPC_DEBUG is not set # CONFIG_RXKAD is not set CONFIG_FIB_RULES=y # # Wireless # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_IEEE80211_SOFTMAC=m # CONFIG_IEEE80211_SOFTMAC_DEBUG is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m CONFIG_MTD=m # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=m CONFIG_MTD_PARTITIONS=y CONFIG_MTD_REDBOOT_PARTS=m CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set # # User Modules And Translation Layers # CONFIG_MTD_CHAR=m CONFIG_MTD_BLKDEVS=m CONFIG_MTD_BLOCK=m CONFIG_MTD_BLOCK_RO=m CONFIG_FTL=m CONFIG_NFTL=m CONFIG_NFTL_RW=y CONFIG_INFTL=m CONFIG_RFD_FTL=m # CONFIG_SSFDC is not set # CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers # CONFIG_MTD_CFI=m CONFIG_MTD_JEDECPROBE=m CONFIG_MTD_GEN_PROBE=m # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set CONFIG_MTD_CFI_INTELEXT=m CONFIG_MTD_CFI_AMDSTD=m CONFIG_MTD_CFI_STAA=m CONFIG_MTD_CFI_UTIL=m CONFIG_MTD_RAM=m CONFIG_MTD_ROM=m CONFIG_MTD_ABSENT=m # # Mapping drivers for chip access # CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=m CONFIG_MTD_PHYSMAP_START=0x8000000 CONFIG_MTD_PHYSMAP_LEN=0x4000000 CONFIG_MTD_PHYSMAP_BANKWIDTH=2 CONFIG_MTD_PNC2000=m CONFIG_MTD_SC520CDP=m CONFIG_MTD_NETSC520=m CONFIG_MTD_TS5500=m CONFIG_MTD_SBC_GXX=m # CONFIG_MTD_AMD76XROM is not set # CONFIG_MTD_ICHXROM is not set # CONFIG_MTD_ESB2ROM is not set # CONFIG_MTD_CK804XROM is not set # CONFIG_MTD_SCB2_FLASH is not set CONFIG_MTD_NETtel=m CONFIG_MTD_DILNETPC=m CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000 # CONFIG_MTD_L440GX is not set CONFIG_MTD_PCI=m # CONFIG_MTD_INTEL_VR_NOR is not set CONFIG_MTD_PLATRAM=m # # Self-contained MTD device drivers # CONFIG_MTD_PMC551=m # CONFIG_MTD_PMC551_BUGFIX is not set # CONFIG_MTD_PMC551_DEBUG is not set CONFIG_MTD_DATAFLASH=m CONFIG_MTD_M25P80=m CONFIG_MTD_SLRAM=m CONFIG_MTD_PHRAM=m CONFIG_MTD_MTDRAM=m CONFIG_MTDRAM_TOTAL_SIZE=4096 CONFIG_MTDRAM_ERASE_SIZE=128 CONFIG_MTD_BLOCK2MTD=m # # Disk-On-Chip Device Drivers # CONFIG_MTD_DOC2000=m CONFIG_MTD_DOC2001=m CONFIG_MTD_DOC2001PLUS=m CONFIG_MTD_DOCPROBE=m CONFIG_MTD_DOCECC=m # CONFIG_MTD_DOCPROBE_ADVANCED is not set CONFIG_MTD_DOCPROBE_ADDRESS=0 CONFIG_MTD_NAND=m # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=m CONFIG_MTD_NAND_DISKONCHIP=m # CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 # CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set # CONFIG_MTD_NAND_CAFE is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set CONFIG_MTD_ONENAND=m CONFIG_MTD_ONENAND_VERIFY_WRITE=y # CONFIG_MTD_ONENAND_OTP is not set # CONFIG_MTD_ONENAND_2X_PROGRAM is not set # CONFIG_MTD_ONENAND_SIM is not set # # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_SERIAL=m CONFIG_PARPORT_PC_FIFO=y # CONFIG_PARPORT_PC_SUPERIO is not set CONFIG_PARPORT_PC_PCMCIA=m # CONFIG_PARPORT_GSC is not set CONFIG_PARPORT_AX88796=m CONFIG_PARPORT_1284=y CONFIG_PARPORT_NOT_PC=y CONFIG_PNP=y CONFIG_PNP_DEBUG=y # # Protocols # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y CONFIG_BLK_DEV_FD=m CONFIG_PARIDE=m # # Parallel IDE high-level drivers # CONFIG_PARIDE_PD=m CONFIG_PARIDE_PCD=m CONFIG_PARIDE_PF=m CONFIG_PARIDE_PT=m CONFIG_PARIDE_PG=m # # Parallel IDE protocol modules # CONFIG_PARIDE_ATEN=m CONFIG_PARIDE_BPCK=m CONFIG_PARIDE_COMM=m CONFIG_PARIDE_DSTR=m CONFIG_PARIDE_FIT2=m CONFIG_PARIDE_FIT3=m CONFIG_PARIDE_EPAT=m # CONFIG_PARIDE_EPATC8 is not set CONFIG_PARIDE_EPIA=m CONFIG_PARIDE_FRIQ=m CONFIG_PARIDE_FRPW=m CONFIG_PARIDE_KBIC=m CONFIG_PARIDE_KTTI=m CONFIG_PARIDE_ON20=m CONFIG_PARIDE_ON26=m CONFIG_BLK_CPQ_DA=m CONFIG_BLK_CPQ_CISS_DA=m CONFIG_CISS_SCSI_TAPE=y CONFIG_BLK_DEV_DAC960=m CONFIG_BLK_DEV_UMEM=m # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_SX8=m # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m CONFIG_MISC_DEVICES=y CONFIG_IBM_ASM=m # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ASUS_LAPTOP is not set # CONFIG_FUJITSU_LAPTOP is not set # CONFIG_MSI_LAPTOP is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set CONFIG_IDE=m CONFIG_BLK_DEV_IDE=m # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=m # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECS=m # CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=m CONFIG_BLK_DEV_IDETAPE=m CONFIG_BLK_DEV_IDEFLOPPY=m # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_BLK_DEV_IDEACPI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=m # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_CMD640=y # CONFIG_BLK_DEV_CMD640_ENHANCED is not set # CONFIG_BLK_DEV_IDEPNP is not set # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_IDEPCI_PCIBUS_ORDER is not set # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=m CONFIG_BLK_DEV_OPTI621=m CONFIG_BLK_DEV_RZ1000=m CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_AEC62XX=m CONFIG_BLK_DEV_ALI15X3=m # CONFIG_WDC_ALI15X3 is not set CONFIG_BLK_DEV_AMD74XX=m CONFIG_BLK_DEV_ATIIXP=m CONFIG_BLK_DEV_CMD64X=m CONFIG_BLK_DEV_TRIFLEX=m CONFIG_BLK_DEV_CY82C693=m CONFIG_BLK_DEV_CS5520=m CONFIG_BLK_DEV_CS5530=m CONFIG_BLK_DEV_HPT34X=m # CONFIG_HPT34X_AUTODMA is not set CONFIG_BLK_DEV_HPT366=m CONFIG_BLK_DEV_JMICRON=m CONFIG_BLK_DEV_SC1200=m CONFIG_BLK_DEV_PIIX=m # CONFIG_BLK_DEV_IT8213 is not set CONFIG_BLK_DEV_IT821X=m CONFIG_BLK_DEV_NS87415=m CONFIG_BLK_DEV_PDC202XX_OLD=m CONFIG_PDC202XX_BURST=y CONFIG_BLK_DEV_PDC202XX_NEW=m CONFIG_BLK_DEV_SVWKS=m CONFIG_BLK_DEV_SIIMAGE=m CONFIG_BLK_DEV_SIS5513=m CONFIG_BLK_DEV_SLC90E66=m CONFIG_BLK_DEV_TRM290=m CONFIG_BLK_DEV_VIA82CXXX=m # CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set # # SCSI device support # CONFIG_RAID_ATTRS=m CONFIG_SCSI=m CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=m CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_CHR_DEV_SCH=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m # CONFIG_SCSI_SAS_LIBSAS is not set CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m CONFIG_BLK_DEV_3W_XXXX_RAID=m CONFIG_SCSI_3W_9XXX=m CONFIG_SCSI_ACARD=m CONFIG_SCSI_AACRAID=m CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=8 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 CONFIG_AIC7XXX_DEBUG_ENABLE=y CONFIG_AIC7XXX_DEBUG_MASK=0 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y CONFIG_SCSI_AIC7XXX_OLD=m CONFIG_SCSI_AIC79XX=m CONFIG_AIC79XX_CMDS_PER_DEVICE=32 CONFIG_AIC79XX_RESET_DELAY_MS=15000 CONFIG_AIC79XX_DEBUG_ENABLE=y CONFIG_AIC79XX_DEBUG_MASK=0 CONFIG_AIC79XX_REG_PRETTY_PRINT=y # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_ADVANSYS is not set CONFIG_SCSI_ARCMSR=m # CONFIG_SCSI_ARCMSR_AER is not set CONFIG_MEGARAID_NEWGEN=y CONFIG_MEGARAID_MM=m CONFIG_MEGARAID_MAILBOX=m CONFIG_MEGARAID_LEGACY=m CONFIG_MEGARAID_SAS=m CONFIG_SCSI_HPTIOP=m CONFIG_SCSI_BUSLOGIC=m # CONFIG_SCSI_OMIT_FLASHPOINT is not set CONFIG_SCSI_DMX3191D=m CONFIG_SCSI_EATA=m CONFIG_SCSI_EATA_TAGGED_QUEUE=y CONFIG_SCSI_EATA_LINKED_COMMANDS=y CONFIG_SCSI_EATA_MAX_TAGS=16 CONFIG_SCSI_FUTURE_DOMAIN=m CONFIG_SCSI_GDTH=m CONFIG_SCSI_IPS=m CONFIG_SCSI_INITIO=m CONFIG_SCSI_INIA100=m CONFIG_SCSI_PPA=m CONFIG_SCSI_IMM=m # CONFIG_SCSI_IZIP_EPP16 is not set # CONFIG_SCSI_IZIP_SLOW_CTR is not set # CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=m CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_SYM53C8XX_MMIO=y CONFIG_SCSI_QLOGIC_1280=m CONFIG_SCSI_QLA_FC=m # CONFIG_SCSI_QLA_ISCSI is not set CONFIG_SCSI_LPFC=m CONFIG_SCSI_DC395x=m CONFIG_SCSI_DC390T=m CONFIG_SCSI_DEBUG=m # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_EMC=m # CONFIG_DM_MULTIPATH_RDAC is not set # CONFIG_DM_MULTIPATH_HP is not set # CONFIG_DM_DELAY is not set # CONFIG_DM_UEVENT is not set CONFIG_FUSION=y CONFIG_FUSION_SPI=m CONFIG_FUSION_FC=m CONFIG_FUSION_SAS=m CONFIG_FUSION_MAX_SGE=40 CONFIG_FUSION_CTL=m CONFIG_FUSION_LAN=m # CONFIG_FUSION_LOGGING is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set CONFIG_IEEE1394=m # # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set # # Controllers # CONFIG_IEEE1394_PCILYNX=m CONFIG_IEEE1394_OHCI1394=m # # Protocols # CONFIG_IEEE1394_VIDEO1394=m CONFIG_IEEE1394_SBP2=m # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y CONFIG_IEEE1394_ETH1394=m CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=m CONFIG_I2O=m CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y CONFIG_I2O_EXT_ADAPTEC=y CONFIG_I2O_EXT_ADAPTEC_DMA64=y CONFIG_I2O_CONFIG=m CONFIG_I2O_CONFIG_OLD_IOCTL=y CONFIG_I2O_BUS=m CONFIG_I2O_BLOCK=m CONFIG_I2O_SCSI=m CONFIG_I2O_PROC=m # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y # CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_IFB=m CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set CONFIG_EQUALIZER=m CONFIG_TUN=m # CONFIG_VETH is not set CONFIG_NET_SB1000=m CONFIG_ARCNET=m CONFIG_ARCNET_1201=m CONFIG_ARCNET_1051=m CONFIG_ARCNET_RAW=m CONFIG_ARCNET_CAP=m CONFIG_ARCNET_COM90xx=m CONFIG_ARCNET_COM90xxIO=m CONFIG_ARCNET_RIM_I=m CONFIG_ARCNET_COM20020=m CONFIG_ARCNET_COM20020_PCI=m CONFIG_PHYLIB=m # # MII PHY device drivers # CONFIG_MARVELL_PHY=m CONFIG_DAVICOM_PHY=m CONFIG_QSEMI_PHY=m CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set CONFIG_FIXED_PHY=m # CONFIG_FIXED_MII_10_FDX is not set # CONFIG_FIXED_MII_100_FDX is not set # CONFIG_FIXED_MII_1000_FDX is not set CONFIG_FIXED_MII_AMNT=1 # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_HAPPYMEAL=m CONFIG_SUNGEM=m CONFIG_CASSINI=m CONFIG_NET_VENDOR_3COM=y CONFIG_VORTEX=m CONFIG_TYPHOON=m CONFIG_NET_TULIP=y CONFIG_DE2104X=m CONFIG_TULIP=m # CONFIG_TULIP_MWI is not set # CONFIG_TULIP_MMIO is not set CONFIG_TULIP_NAPI=y CONFIG_TULIP_NAPI_HW_MITIGATION=y CONFIG_DE4X5=m CONFIG_WINBOND_840=m CONFIG_DM9102=m CONFIG_ULI526X=m CONFIG_PCMCIA_XIRCOM=m CONFIG_HP100=m # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y CONFIG_PCNET32=m # CONFIG_PCNET32_NAPI is not set CONFIG_AMD8111_ETH=m CONFIG_AMD8111E_NAPI=y CONFIG_ADAPTEC_STARFIRE=m CONFIG_ADAPTEC_STARFIRE_NAPI=y CONFIG_B44=m CONFIG_B44_PCI_AUTOSELECT=y CONFIG_B44_PCICORE_AUTOSELECT=y CONFIG_B44_PCI=y CONFIG_FORCEDETH=m # CONFIG_FORCEDETH_NAPI is not set CONFIG_EEPRO100=m CONFIG_E100=m CONFIG_FEALNX=m CONFIG_NATSEMI=m CONFIG_NE2K_PCI=m CONFIG_8139CP=m CONFIG_8139TOO=m # CONFIG_8139TOO_PIO is not set CONFIG_8139TOO_TUNE_TWISTER=y CONFIG_8139TOO_8129=y # CONFIG_8139_OLD_RX_RESET is not set CONFIG_SIS900=m CONFIG_EPIC100=m CONFIG_SUNDANCE=m # CONFIG_SUNDANCE_MMIO is not set CONFIG_VIA_RHINE=m # CONFIG_VIA_RHINE_MMIO is not set CONFIG_VIA_RHINE_NAPI=y # CONFIG_SC92031 is not set # CONFIG_NET_POCKET is not set CONFIG_NETDEV_1000=y CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set CONFIG_DL2K=m CONFIG_E1000=m CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set CONFIG_NS83820=m CONFIG_HAMACHI=m CONFIG_YELLOWFIN=m CONFIG_R8169=m CONFIG_R8169_NAPI=y CONFIG_R8169_VLAN=y CONFIG_SIS190=m CONFIG_SKGE=m # CONFIG_SKGE_DEBUG is not set CONFIG_SKY2=m # CONFIG_SKY2_DEBUG is not set # CONFIG_SK98LIN is not set CONFIG_VIA_VELOCITY=m CONFIG_TIGON3=m CONFIG_BNX2=m # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set CONFIG_NETDEV_10000=y CONFIG_CHELSIO_T1=m # CONFIG_CHELSIO_T1_1G is not set CONFIG_CHELSIO_T1_NAPI=y # CONFIG_CHELSIO_T3 is not set # CONFIG_IXGBE is not set CONFIG_IXGB=m CONFIG_IXGB_NAPI=y CONFIG_S2IO=m CONFIG_S2IO_NAPI=y CONFIG_MYRI10GE=m # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set CONFIG_TR=y CONFIG_IBMOL=m # CONFIG_3C359 is not set CONFIG_TMS380TR=m CONFIG_TMSPCI=m CONFIG_ABYSS=m # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # # USB Network Adapters # CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m CONFIG_USB_NET_CDCETHER=m # CONFIG_USB_NET_DM9601 is not set CONFIG_USB_NET_GL620A=m CONFIG_USB_NET_NET1080=m CONFIG_USB_NET_PLUSB=m # CONFIG_USB_NET_MCS7830 is not set CONFIG_USB_NET_RNDIS_HOST=m CONFIG_USB_NET_CDC_SUBSET=m CONFIG_USB_ALI_M5632=y CONFIG_USB_AN2720=y CONFIG_USB_BELKIN=y CONFIG_USB_ARMLINUX=y CONFIG_USB_EPSON2888=y # CONFIG_USB_KC2190 is not set CONFIG_USB_NET_ZAURUS=m CONFIG_NET_PCMCIA=y CONFIG_PCMCIA_3C589=m CONFIG_PCMCIA_3C574=m CONFIG_PCMCIA_FMVJ18X=m CONFIG_PCMCIA_PCNET=m CONFIG_PCMCIA_NMCLAN=m CONFIG_PCMCIA_SMC91C92=m CONFIG_PCMCIA_XIRC2PS=m CONFIG_PCMCIA_AXNET=m CONFIG_ARCNET_COM20020_CS=m CONFIG_WAN=y CONFIG_LANMEDIA=m CONFIG_HDLC=m CONFIG_HDLC_RAW=m CONFIG_HDLC_RAW_ETH=m CONFIG_HDLC_CISCO=m CONFIG_HDLC_FR=m CONFIG_HDLC_PPP=m CONFIG_HDLC_X25=m CONFIG_PCI200SYN=m CONFIG_WANXL=m CONFIG_PC300=m CONFIG_PC300_MLPPP=y # # Cyclades-PC300 MLPPP support is disabled. # # # Refer to the file README.mlppp, provided by PC300 package. # # CONFIG_PC300TOO is not set CONFIG_FARSYNC=m CONFIG_DSCC4=m CONFIG_DSCC4_PCISYNC=y CONFIG_DSCC4_PCI_RST=y CONFIG_DLCI=m CONFIG_DLCI_MAX=8 CONFIG_WAN_ROUTER_DRIVERS=m CONFIG_CYCLADES_SYNC=m CONFIG_CYCLOMX_X25=y CONFIG_LAPBETHER=m CONFIG_X25_ASY=m CONFIG_SBNI=m # CONFIG_SBNI_MULTILINE is not set CONFIG_ATM_DRIVERS=y CONFIG_ATM_DUMMY=m CONFIG_ATM_TCP=m CONFIG_ATM_LANAI=m CONFIG_ATM_ENI=m # CONFIG_ATM_ENI_DEBUG is not set # CONFIG_ATM_ENI_TUNE_BURST is not set CONFIG_ATM_FIRESTREAM=m CONFIG_ATM_ZATM=m # CONFIG_ATM_ZATM_DEBUG is not set CONFIG_ATM_IDT77252=m # CONFIG_ATM_IDT77252_DEBUG is not set # CONFIG_ATM_IDT77252_RCV_ALL is not set CONFIG_ATM_IDT77252_USE_SUNI=y CONFIG_ATM_AMBASSADOR=m # CONFIG_ATM_AMBASSADOR_DEBUG is not set CONFIG_ATM_HORIZON=m # CONFIG_ATM_HORIZON_DEBUG is not set CONFIG_ATM_FORE200E_MAYBE=m CONFIG_ATM_FORE200E_PCA=y CONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y # CONFIG_ATM_FORE200E_USE_TASKLET is not set CONFIG_ATM_FORE200E_TX_RETRY=16 CONFIG_ATM_FORE200E_DEBUG=0 CONFIG_ATM_FORE200E=m CONFIG_ATM_HE=m CONFIG_ATM_HE_USE_SUNI=y CONFIG_FDDI=y CONFIG_DEFXX=m # CONFIG_DEFXX_MMIO is not set CONFIG_SKFP=m CONFIG_HIPPI=y CONFIG_ROADRUNNER=m # CONFIG_ROADRUNNER_LARGE_RINGS is not set CONFIG_PLIP=m CONFIG_PPP=m CONFIG_PPP_MULTILINK=y CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m CONFIG_PPP_MPPE=m CONFIG_PPPOE=m CONFIG_PPPOATM=m # CONFIG_PPPOL2TP is not set CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLHC=m CONFIG_SLIP_SMART=y # CONFIG_SLIP_MODE_SLIP6 is not set CONFIG_NET_FC=y CONFIG_SHAPER=m CONFIG_NETCONSOLE=m # CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y CONFIG_ISDN=m CONFIG_ISDN_I4L=m CONFIG_ISDN_PPP=y CONFIG_ISDN_PPP_VJ=y CONFIG_ISDN_MPP=y CONFIG_IPPP_FILTER=y CONFIG_ISDN_PPP_BSDCOMP=m CONFIG_ISDN_AUDIO=y CONFIG_ISDN_TTY_FAX=y CONFIG_ISDN_X25=y # # ISDN feature submodules # CONFIG_ISDN_DIVERSION=m # # ISDN4Linux hardware drivers # # # Passive cards # CONFIG_ISDN_DRV_HISAX=m # # D-channel protocol features # CONFIG_HISAX_EURO=y CONFIG_DE_AOC=y # CONFIG_HISAX_NO_SENDCOMPLETE is not set # CONFIG_HISAX_NO_LLC is not set # CONFIG_HISAX_NO_KEYPAD is not set CONFIG_HISAX_1TR6=y CONFIG_HISAX_NI1=y CONFIG_HISAX_MAX_CARDS=8 # # HiSax supported cards # CONFIG_HISAX_16_3=y CONFIG_HISAX_TELESPCI=y CONFIG_HISAX_S0BOX=y CONFIG_HISAX_FRITZPCI=y CONFIG_HISAX_AVM_A1_PCMCIA=y CONFIG_HISAX_ELSA=y CONFIG_HISAX_DIEHLDIVA=y CONFIG_HISAX_SEDLBAUER=y CONFIG_HISAX_NETJET=y CONFIG_HISAX_NETJET_U=y CONFIG_HISAX_NICCY=y CONFIG_HISAX_BKM_A4T=y CONFIG_HISAX_SCT_QUADRO=y CONFIG_HISAX_GAZEL=y CONFIG_HISAX_HFC_PCI=y CONFIG_HISAX_W6692=y CONFIG_HISAX_HFC_SX=y CONFIG_HISAX_ENTERNOW_PCI=y # CONFIG_HISAX_DEBUG is not set # # HiSax PCMCIA card service modules # CONFIG_HISAX_SEDLBAUER_CS=m CONFIG_HISAX_ELSA_CS=m CONFIG_HISAX_AVM_A1_CS=m CONFIG_HISAX_TELES_CS=m # # HiSax sub driver modules # CONFIG_HISAX_ST5481=m CONFIG_HISAX_HFCUSB=m CONFIG_HISAX_HFC4S8S=m CONFIG_HISAX_FRITZ_PCIPNP=m CONFIG_HISAX_HDLC=y # # Active cards # CONFIG_ISDN_DRV_GIGASET=m CONFIG_GIGASET_BASE=m CONFIG_GIGASET_M105=m # CONFIG_GIGASET_M101 is not set # CONFIG_GIGASET_DEBUG is not set # CONFIG_GIGASET_UNDOCREQ is not set CONFIG_ISDN_CAPI=m CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y CONFIG_CAPI_TRACE=y CONFIG_ISDN_CAPI_MIDDLEWARE=y CONFIG_ISDN_CAPI_CAPI20=m CONFIG_ISDN_CAPI_CAPIFS_BOOL=y CONFIG_ISDN_CAPI_CAPIFS=m CONFIG_ISDN_CAPI_CAPIDRV=m # # CAPI hardware drivers # CONFIG_CAPI_AVM=y CONFIG_ISDN_DRV_AVMB1_B1PCI=m CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m CONFIG_ISDN_DRV_AVMB1_AVM_CS=m CONFIG_ISDN_DRV_AVMB1_T1PCI=m CONFIG_ISDN_DRV_AVMB1_C4=m CONFIG_CAPI_EICON=y CONFIG_ISDN_DIVAS=m CONFIG_ISDN_DIVAS_BRIPCI=y CONFIG_ISDN_DIVAS_PRIPCI=y CONFIG_ISDN_DIVAS_DIVACAPI=m CONFIG_ISDN_DIVAS_USERIDI=m CONFIG_ISDN_DIVAS_MAINT=m CONFIG_PHONE=m CONFIG_PHONE_IXJ=m CONFIG_PHONE_IXJ_PCMCIA=m # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set CONFIG_INPUT_POLLDEV=m # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y CONFIG_KEYBOARD_SUNKBD=m CONFIG_KEYBOARD_LKKBD=m CONFIG_KEYBOARD_XTKBD=m CONFIG_KEYBOARD_NEWTON=m # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_APPLETOUCH is not set CONFIG_MOUSE_VSXXXAA=m CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_ANALOG=m CONFIG_JOYSTICK_A3D=m CONFIG_JOYSTICK_ADI=m CONFIG_JOYSTICK_COBRA=m CONFIG_JOYSTICK_GF2K=m CONFIG_JOYSTICK_GRIP=m CONFIG_JOYSTICK_GRIP_MP=m CONFIG_JOYSTICK_GUILLEMOT=m CONFIG_JOYSTICK_INTERACT=m CONFIG_JOYSTICK_SIDEWINDER=m CONFIG_JOYSTICK_TMDC=m CONFIG_JOYSTICK_IFORCE=m CONFIG_JOYSTICK_IFORCE_USB=y CONFIG_JOYSTICK_IFORCE_232=y CONFIG_JOYSTICK_WARRIOR=m CONFIG_JOYSTICK_MAGELLAN=m CONFIG_JOYSTICK_SPACEORB=m CONFIG_JOYSTICK_SPACEBALL=m CONFIG_JOYSTICK_STINGER=m CONFIG_JOYSTICK_TWIDJOY=m CONFIG_JOYSTICK_DB9=m CONFIG_JOYSTICK_GAMECON=m CONFIG_JOYSTICK_TURBOGRAFX=m CONFIG_JOYSTICK_JOYDUMP=m # CONFIG_JOYSTICK_XPAD is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=m # CONFIG_TOUCHSCREEN_FUJITSU is not set CONFIG_TOUCHSCREEN_GUNZE=m CONFIG_TOUCHSCREEN_ELO=m CONFIG_TOUCHSCREEN_MTOUCH=m CONFIG_TOUCHSCREEN_MK712=m # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_UCB1400 is not set # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_ATLAS_BTNS is not set # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set CONFIG_INPUT_UINPUT=m # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=m CONFIG_SERIO_CT82C710=m CONFIG_SERIO_PARKBD=m CONFIG_SERIO_PCIPS2=m CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=m CONFIG_GAMEPORT=m CONFIG_GAMEPORT_NS558=m CONFIG_GAMEPORT_L4=m CONFIG_GAMEPORT_EMU10K1=m CONFIG_GAMEPORT_FM801=m # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set CONFIG_SERIAL_NONSTANDARD=y CONFIG_COMPUTONE=m CONFIG_ROCKETPORT=m CONFIG_CYCLADES=m # CONFIG_CYZ_INTR is not set CONFIG_DIGIEPCA=m CONFIG_MOXA_INTELLIO=m CONFIG_MOXA_SMARTIO=m # CONFIG_MOXA_SMARTIO_NEW is not set CONFIG_ISI=m CONFIG_SYNCLINK=m CONFIG_SYNCLINKMP=m CONFIG_SYNCLINK_GT=m CONFIG_N_HDLC=m CONFIG_SPECIALIX=m # CONFIG_SPECIALIX_RTSCTS is not set CONFIG_SX=m CONFIG_RIO=m CONFIG_RIO_OLDPCI=y CONFIG_STALDRV=y # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_CS=m CONFIG_SERIAL_8250_NR_UARTS=16 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_JSM=m CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=16 CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=m CONFIG_IPMI_HANDLER=m # CONFIG_IPMI_PANIC_EVENT is not set CONFIG_IPMI_DEVICE_INTERFACE=m CONFIG_IPMI_SI=m CONFIG_IPMI_WATCHDOG=m CONFIG_IPMI_POWEROFF=m CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_INTEL=m CONFIG_HW_RANDOM_AMD=m CONFIG_NVRAM=m CONFIG_RTC=y CONFIG_R3964=m CONFIG_APPLICOM=m # # PCMCIA character devices # CONFIG_SYNCLINK_CS=m CONFIG_CARDMAN_4000=m CONFIG_CARDMAN_4040=m CONFIG_MWAVE=m CONFIG_PC8736x_GPIO=m CONFIG_NSC_GPIO=m CONFIG_RAW_DRIVER=m CONFIG_MAX_RAW_DEVS=256 CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y CONFIG_HANGCHECK_TIMER=m # CONFIG_TCG_TPM is not set CONFIG_TELCLOCK=m CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m # # I2C Algorithms # CONFIG_I2C_ALGOBIT=m CONFIG_I2C_ALGOPCF=m CONFIG_I2C_ALGOPCA=m # # I2C Hardware Bus support # CONFIG_I2C_ALI1535=m CONFIG_I2C_ALI1563=m CONFIG_I2C_ALI15X3=m CONFIG_I2C_AMD756=m CONFIG_I2C_AMD756_S4882=m CONFIG_I2C_AMD8111=m CONFIG_I2C_I801=m CONFIG_I2C_I810=m CONFIG_I2C_PIIX4=m CONFIG_I2C_NFORCE2=m CONFIG_I2C_OCORES=m CONFIG_I2C_PARPORT=m CONFIG_I2C_PARPORT_LIGHT=m CONFIG_I2C_PROSAVAGE=m CONFIG_I2C_SAVAGE4=m # CONFIG_I2C_SIMTEC is not set CONFIG_I2C_SIS5595=m CONFIG_I2C_SIS630=m CONFIG_I2C_SIS96X=m # CONFIG_I2C_TAOS_EVM is not set CONFIG_I2C_STUB=m # CONFIG_I2C_TINY_USB is not set CONFIG_I2C_VIA=m CONFIG_I2C_VIAPRO=m CONFIG_I2C_VOODOO3=m # # Miscellaneous I2C Chip support # CONFIG_SENSORS_DS1337=m CONFIG_SENSORS_DS1374=m # CONFIG_DS1682 is not set CONFIG_SENSORS_EEPROM=m CONFIG_SENSORS_PCF8574=m CONFIG_SENSORS_PCA9539=m CONFIG_SENSORS_PCF8591=m CONFIG_SENSORS_MAX6875=m # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # SPI support # CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # CONFIG_SPI_BITBANG=m CONFIG_SPI_BUTTERFLY=m # CONFIG_SPI_LM70_LLP is not set # # SPI Protocol Masters # # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_W1=m CONFIG_W1_CON=y # # 1-wire Bus Masters # CONFIG_W1_MASTER_MATROX=m CONFIG_W1_MASTER_DS2490=m CONFIG_W1_MASTER_DS2482=m # # 1-wire Slaves # CONFIG_W1_SLAVE_THERM=m CONFIG_W1_SLAVE_SMEM=m CONFIG_W1_SLAVE_DS2433=m # CONFIG_W1_SLAVE_DS2433_CRC is not set # CONFIG_W1_SLAVE_DS2760 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set CONFIG_HWMON=y CONFIG_HWMON_VID=m CONFIG_SENSORS_ABITUGURU=m # CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7418 is not set CONFIG_SENSORS_ADM1021=m CONFIG_SENSORS_ADM1025=m CONFIG_SENSORS_ADM1026=m # CONFIG_SENSORS_ADM1029 is not set CONFIG_SENSORS_ADM1031=m CONFIG_SENSORS_ADM9240=m # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_K8TEMP is not set CONFIG_SENSORS_ASB100=m CONFIG_SENSORS_ATXP1=m CONFIG_SENSORS_DS1621=m # CONFIG_SENSORS_I5K_AMB is not set CONFIG_SENSORS_F71805F=m # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set CONFIG_SENSORS_FSCHER=m CONFIG_SENSORS_FSCPOS=m # CONFIG_SENSORS_FSCHMD is not set CONFIG_SENSORS_GL518SM=m CONFIG_SENSORS_GL520SM=m # CONFIG_SENSORS_CORETEMP is not set # CONFIG_SENSORS_IBMPEX is not set CONFIG_SENSORS_IT87=m CONFIG_SENSORS_LM63=m CONFIG_SENSORS_LM70=m CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM77=m CONFIG_SENSORS_LM78=m CONFIG_SENSORS_LM80=m CONFIG_SENSORS_LM83=m CONFIG_SENSORS_LM85=m CONFIG_SENSORS_LM87=m CONFIG_SENSORS_LM90=m CONFIG_SENSORS_LM92=m # CONFIG_SENSORS_LM93 is not set CONFIG_SENSORS_MAX1619=m # CONFIG_SENSORS_MAX6650 is not set CONFIG_SENSORS_PC87360=m # CONFIG_SENSORS_PC87427 is not set CONFIG_SENSORS_SIS5595=m # CONFIG_SENSORS_DME1737 is not set CONFIG_SENSORS_SMSC47M1=m CONFIG_SENSORS_SMSC47M192=m CONFIG_SENSORS_SMSC47B397=m # CONFIG_SENSORS_THMC50 is not set CONFIG_SENSORS_VIA686A=m # CONFIG_SENSORS_VT1211 is not set CONFIG_SENSORS_VT8231=m CONFIG_SENSORS_W83781D=m CONFIG_SENSORS_W83791D=m CONFIG_SENSORS_W83792D=m CONFIG_SENSORS_W83793=m CONFIG_SENSORS_W83L785TS=m CONFIG_SENSORS_W83627HF=m CONFIG_SENSORS_W83627EHF=m CONFIG_SENSORS_HDAPS=m # CONFIG_SENSORS_APPLESMC is not set # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers # CONFIG_SOFT_WATCHDOG=m CONFIG_ACQUIRE_WDT=m CONFIG_ADVANTECH_WDT=m CONFIG_ALIM1535_WDT=m CONFIG_ALIM7101_WDT=m CONFIG_SC520_WDT=m CONFIG_EUROTECH_WDT=m CONFIG_IB700_WDT=m CONFIG_IBMASR=m CONFIG_WAFER_WDT=m CONFIG_I6300ESB_WDT=m # CONFIG_ITCO_WDT is not set # CONFIG_IT8712F_WDT is not set CONFIG_SC1200_WDT=m # CONFIG_PC87413_WDT is not set CONFIG_60XX_WDT=m CONFIG_SBC8360_WDT=m CONFIG_CPU5_WDT=m # CONFIG_SMSC37B787_WDT is not set CONFIG_W83627HF_WDT=m # CONFIG_W83697HF_WDT is not set CONFIG_W83877F_WDT=m CONFIG_W83977F_WDT=m CONFIG_MACHZ_WDT=m CONFIG_SBC_EPX_C3_WATCHDOG=m # # PCI-based Watchdog Cards # CONFIG_PCIPCWATCHDOG=m CONFIG_WDTPCI=m CONFIG_WDT_501_PCI=y # # USB-based Watchdog Cards # CONFIG_USBPCWATCHDOG=m # # Sonics Silicon Backplane # CONFIG_SSB_POSSIBLE=y CONFIG_SSB=m CONFIG_SSB_PCIHOST_POSSIBLE=y CONFIG_SSB_PCIHOST=y CONFIG_SSB_PCMCIAHOST_POSSIBLE=y # CONFIG_SSB_PCMCIAHOST is not set # CONFIG_SSB_DEBUG is not set CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y CONFIG_SSB_DRIVER_PCICORE=y # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set # # Multimedia devices # CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y CONFIG_VIDEO_V4L2=y CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y CONFIG_VIDEO_TVAUDIO=m CONFIG_VIDEO_TDA7432=m CONFIG_VIDEO_TDA9840=m CONFIG_VIDEO_TDA9875=m CONFIG_VIDEO_TEA6415C=m CONFIG_VIDEO_TEA6420=m CONFIG_VIDEO_MSP3400=m CONFIG_VIDEO_WM8775=m CONFIG_VIDEO_BT819=m CONFIG_VIDEO_BT856=m CONFIG_VIDEO_KS0127=m CONFIG_VIDEO_SAA7110=m CONFIG_VIDEO_SAA7111=m CONFIG_VIDEO_SAA7114=m CONFIG_VIDEO_SAA711X=m CONFIG_VIDEO_TVP5150=m CONFIG_VIDEO_VPX3220=m CONFIG_VIDEO_CX25840=m CONFIG_VIDEO_CX2341X=m CONFIG_VIDEO_SAA7185=m CONFIG_VIDEO_ADV7170=m CONFIG_VIDEO_ADV7175=m CONFIG_VIDEO_VIVI=m CONFIG_VIDEO_BT848=m CONFIG_VIDEO_BT848_DVB=y CONFIG_VIDEO_SAA6588=m CONFIG_VIDEO_BWQCAM=m CONFIG_VIDEO_CQCAM=m CONFIG_VIDEO_W9966=m CONFIG_VIDEO_CPIA=m CONFIG_VIDEO_CPIA_PP=m CONFIG_VIDEO_CPIA_USB=m CONFIG_VIDEO_CPIA2=m CONFIG_VIDEO_SAA5246A=m CONFIG_VIDEO_SAA5249=m CONFIG_TUNER_3036=m CONFIG_VIDEO_STRADIS=m CONFIG_VIDEO_ZORAN_ZR36060=m CONFIG_VIDEO_ZORAN=m CONFIG_VIDEO_ZORAN_BUZ=m CONFIG_VIDEO_ZORAN_DC10=m CONFIG_VIDEO_ZORAN_DC30=m CONFIG_VIDEO_ZORAN_LML33=m CONFIG_VIDEO_ZORAN_LML33R10=m CONFIG_VIDEO_ZORAN_AVS6EYES=m CONFIG_VIDEO_SAA7134=m CONFIG_VIDEO_SAA7134_ALSA=m CONFIG_VIDEO_SAA7134_OSS=m CONFIG_VIDEO_SAA7134_DVB=m CONFIG_VIDEO_MXB=m CONFIG_VIDEO_DPC=m CONFIG_VIDEO_HEXIUM_ORION=m CONFIG_VIDEO_HEXIUM_GEMINI=m CONFIG_VIDEO_CX88=m CONFIG_VIDEO_CX88_ALSA=m CONFIG_VIDEO_CX88_BLACKBIRD=m CONFIG_VIDEO_CX88_DVB=m CONFIG_VIDEO_CX88_VP3054=m # CONFIG_VIDEO_CX23885 is not set # CONFIG_VIDEO_IVTV is not set # CONFIG_VIDEO_CAFE_CCIC is not set CONFIG_V4L_USB_DRIVERS=y CONFIG_VIDEO_PVRUSB2=m # CONFIG_VIDEO_PVRUSB2_29XXX is not set CONFIG_VIDEO_PVRUSB2_24XXX=y CONFIG_VIDEO_PVRUSB2_SYSFS=y # CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set CONFIG_VIDEO_EM28XX=m # CONFIG_VIDEO_USBVISION is not set CONFIG_VIDEO_USBVIDEO=m CONFIG_USB_VICAM=m CONFIG_USB_IBMCAM=m CONFIG_USB_KONICAWC=m CONFIG_USB_QUICKCAM_MESSENGER=m CONFIG_USB_ET61X251=m CONFIG_VIDEO_OVCAMCHIP=m CONFIG_USB_W9968CF=m CONFIG_USB_OV511=m CONFIG_USB_SE401=m CONFIG_USB_SN9C102=m CONFIG_USB_STV680=m CONFIG_USB_ZC0301=m CONFIG_USB_PWC=m # CONFIG_USB_PWC_DEBUG is not set # CONFIG_USB_ZR364XX is not set CONFIG_RADIO_ADAPTERS=y CONFIG_RADIO_GEMTEK_PCI=m CONFIG_RADIO_MAXIRADIO=m CONFIG_RADIO_MAESTRO=m CONFIG_USB_DSBR=m CONFIG_DVB_CORE=m # CONFIG_DVB_CORE_ATTACH is not set CONFIG_DVB_CAPTURE_DRIVERS=y # # Supported SAA7146 based PCI Adapters # CONFIG_DVB_AV7110=m CONFIG_DVB_AV7110_OSD=y CONFIG_DVB_BUDGET=m CONFIG_DVB_BUDGET_CI=m CONFIG_DVB_BUDGET_AV=m CONFIG_DVB_BUDGET_PATCH=m # # Supported USB Adapters # CONFIG_DVB_USB=m # CONFIG_DVB_USB_DEBUG is not set CONFIG_DVB_USB_A800=m CONFIG_DVB_USB_DIBUSB_MB=m CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y CONFIG_DVB_USB_DIBUSB_MC=m # CONFIG_DVB_USB_DIB0700 is not set CONFIG_DVB_USB_UMT_010=m CONFIG_DVB_USB_CXUSB=m # CONFIG_DVB_USB_M920X is not set # CONFIG_DVB_USB_GL861 is not set # CONFIG_DVB_USB_AU6610 is not set CONFIG_DVB_USB_DIGITV=m CONFIG_DVB_USB_VP7045=m CONFIG_DVB_USB_VP702X=m CONFIG_DVB_USB_GP8PSK=m CONFIG_DVB_USB_NOVA_T_USB2=m # CONFIG_DVB_USB_TTUSB2 is not set CONFIG_DVB_USB_DTT200U=m # CONFIG_DVB_USB_OPERA1 is not set # CONFIG_DVB_USB_AF9005 is not set CONFIG_DVB_TTUSB_BUDGET=m CONFIG_DVB_TTUSB_DEC=m CONFIG_DVB_CINERGYT2=m # CONFIG_DVB_CINERGYT2_TUNING is not set # # Supported FlexCopII (B2C2) Adapters # CONFIG_DVB_B2C2_FLEXCOP=m CONFIG_DVB_B2C2_FLEXCOP_PCI=m CONFIG_DVB_B2C2_FLEXCOP_USB=m # CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set # # Supported BT878 Adapters # CONFIG_DVB_BT8XX=m # # Supported Pluto2 Adapters # CONFIG_DVB_PLUTO2=m # # Supported DVB Frontends # # # Customise DVB Frontends # # CONFIG_DVB_FE_CUSTOMISE is not set # # DVB-S (satellite) frontends # CONFIG_DVB_STV0299=m CONFIG_DVB_CX24110=m CONFIG_DVB_CX24123=m CONFIG_DVB_TDA8083=m CONFIG_DVB_MT312=m CONFIG_DVB_VES1X93=m CONFIG_DVB_S5H1420=m CONFIG_DVB_TDA10086=m # # DVB-T (terrestrial) frontends # CONFIG_DVB_SP8870=m CONFIG_DVB_SP887X=m CONFIG_DVB_CX22700=m CONFIG_DVB_CX22702=m CONFIG_DVB_L64781=m CONFIG_DVB_TDA1004X=m CONFIG_DVB_NXT6000=m CONFIG_DVB_MT352=m CONFIG_DVB_ZL10353=m CONFIG_DVB_DIB3000MB=m CONFIG_DVB_DIB3000MC=m # CONFIG_DVB_DIB7000M is not set # CONFIG_DVB_DIB7000P is not set # # DVB-C (cable) frontends # CONFIG_DVB_VES1820=m CONFIG_DVB_TDA10021=m CONFIG_DVB_TDA10023=m CONFIG_DVB_STV0297=m # # ATSC (North American/Korean Terrestrial/Cable DTV) frontends # CONFIG_DVB_NXT200X=m CONFIG_DVB_OR51211=m CONFIG_DVB_OR51132=m CONFIG_DVB_BCM3510=m CONFIG_DVB_LGDT330X=m # CONFIG_DVB_S5H1409 is not set # # Tuners/PLL support # CONFIG_DVB_PLL=m CONFIG_DVB_TDA826X=m CONFIG_DVB_TDA827X=m # CONFIG_DVB_TUNER_QT1010 is not set CONFIG_DVB_TUNER_MT2060=m # CONFIG_DVB_TUNER_MT2266 is not set # CONFIG_DVB_TUNER_MT2131 is not set # CONFIG_DVB_TUNER_DIB0070 is not set # # Miscellaneous devices # CONFIG_DVB_LNBP21=m CONFIG_DVB_ISL6421=m CONFIG_DVB_TUA6100=m CONFIG_VIDEO_SAA7146=m CONFIG_VIDEO_SAA7146_VV=m CONFIG_VIDEO_TUNER=m # CONFIG_VIDEO_TUNER_CUSTOMIZE is not set CONFIG_TUNER_MT20XX=m CONFIG_TUNER_TDA8290=m CONFIG_TUNER_TEA5761=m CONFIG_TUNER_TEA5767=m CONFIG_TUNER_SIMPLE=m CONFIG_VIDEOBUF_GEN=m CONFIG_VIDEOBUF_DMA_SG=m CONFIG_VIDEOBUF_VMALLOC=m CONFIG_VIDEOBUF_DVB=m CONFIG_VIDEO_BTCX=m CONFIG_VIDEO_IR_I2C=m CONFIG_VIDEO_IR=m CONFIG_VIDEO_TVEEPROM=m CONFIG_DAB=y # CONFIG_USB_DABUSB is not set # # Graphics support # CONFIG_AGP=y CONFIG_AGP_AMD64=y CONFIG_AGP_INTEL=m CONFIG_AGP_SIS=m CONFIG_AGP_VIA=m CONFIG_DRM=m CONFIG_DRM_TDFX=m CONFIG_DRM_R128=m CONFIG_DRM_RADEON=m CONFIG_DRM_I810=m CONFIG_DRM_I830=m CONFIG_DRM_I915=m CONFIG_DRM_MGA=m CONFIG_DRM_SIS=m CONFIG_DRM_VIA=m CONFIG_DRM_SAVAGE=m CONFIG_VGASTATE=m # CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=m CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set CONFIG_FB_SYS_FILLRECT=m CONFIG_FB_SYS_COPYAREA=m CONFIG_FB_SYS_IMAGEBLIT=m CONFIG_FB_SYS_FOPS=m CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # CONFIG_FB_CIRRUS=m CONFIG_FB_PM2=m CONFIG_FB_PM2_FIFO_DISCONNECT=y CONFIG_FB_CYBER2000=m CONFIG_FB_ARC=m # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_VGA16=m # CONFIG_FB_UVESA is not set CONFIG_FB_VESA=y # CONFIG_FB_EFI is not set # CONFIG_FB_HECUBA is not set CONFIG_FB_HGA=m # CONFIG_FB_HGA_ACCEL is not set CONFIG_FB_S1D13XXX=m CONFIG_FB_NVIDIA=m # CONFIG_FB_NVIDIA_I2C is not set # CONFIG_FB_NVIDIA_DEBUG is not set CONFIG_FB_NVIDIA_BACKLIGHT=y # CONFIG_FB_RIVA is not set # CONFIG_FB_LE80578 is not set CONFIG_FB_INTEL=m # CONFIG_FB_INTEL_DEBUG is not set CONFIG_FB_INTEL_I2C=y CONFIG_FB_MATROX=m CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y CONFIG_FB_MATROX_G=y CONFIG_FB_MATROX_I2C=m CONFIG_FB_MATROX_MAVEN=m CONFIG_FB_MATROX_MULTIHEAD=y CONFIG_FB_RADEON=m CONFIG_FB_RADEON_I2C=y CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_RADEON_DEBUG is not set CONFIG_FB_ATY128=m CONFIG_FB_ATY128_BACKLIGHT=y CONFIG_FB_ATY=m CONFIG_FB_ATY_CT=y # CONFIG_FB_ATY_GENERIC_LCD is not set CONFIG_FB_ATY_GX=y CONFIG_FB_ATY_BACKLIGHT=y # CONFIG_FB_S3 is not set CONFIG_FB_SAVAGE=m # CONFIG_FB_SAVAGE_I2C is not set # CONFIG_FB_SAVAGE_ACCEL is not set CONFIG_FB_SIS=m CONFIG_FB_SIS_300=y CONFIG_FB_SIS_315=y CONFIG_FB_NEOMAGIC=m CONFIG_FB_KYRO=m CONFIG_FB_3DFX=m # CONFIG_FB_3DFX_ACCEL is not set CONFIG_FB_VOODOO1=m # CONFIG_FB_VT8623 is not set CONFIG_FB_TRIDENT=m # CONFIG_FB_TRIDENT_ACCEL is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_GEODE is not set CONFIG_FB_VIRTUAL=m CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_CORGI is not set # CONFIG_BACKLIGHT_PROGEAR is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_LOGO is not set # # Sound # CONFIG_SOUND=m # # Advanced Linux Sound Architecture # CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_HWDEP=m CONFIG_SND_RAWMIDI=m CONFIG_SND_SEQUENCER=m CONFIG_SND_SEQ_DUMMY=m CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_RTCTIMER=m CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m CONFIG_SND_VX_LIB=m CONFIG_SND_AC97_CODEC=m CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m # CONFIG_SND_MTS64 is not set CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m # CONFIG_SND_PORTMAN2X4 is not set CONFIG_SND_SB_COMMON=m # # PCI devices # CONFIG_SND_AD1889=m CONFIG_SND_ALS300=m CONFIG_SND_ALS4000=m CONFIG_SND_ALI5451=m CONFIG_SND_ATIIXP=m CONFIG_SND_ATIIXP_MODEM=m CONFIG_SND_AU8810=m CONFIG_SND_AU8820=m CONFIG_SND_AU8830=m CONFIG_SND_AZT3328=m CONFIG_SND_BT87X=m # CONFIG_SND_BT87X_OVERCLOCK is not set CONFIG_SND_CA0106=m CONFIG_SND_CMIPCI=m CONFIG_SND_CS4281=m CONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y # CONFIG_SND_CS5530 is not set CONFIG_SND_DARLA20=m CONFIG_SND_GINA20=m CONFIG_SND_LAYLA20=m CONFIG_SND_DARLA24=m CONFIG_SND_GINA24=m CONFIG_SND_LAYLA24=m CONFIG_SND_MONA=m CONFIG_SND_MIA=m CONFIG_SND_ECHO3G=m CONFIG_SND_INDIGO=m CONFIG_SND_INDIGOIO=m CONFIG_SND_INDIGODJ=m CONFIG_SND_EMU10K1=m CONFIG_SND_EMU10K1X=m CONFIG_SND_ENS1370=m CONFIG_SND_ENS1371=m CONFIG_SND_ES1938=m CONFIG_SND_ES1968=m CONFIG_SND_FM801=m CONFIG_SND_FM801_TEA575X_BOOL=y CONFIG_SND_FM801_TEA575X=m CONFIG_SND_HDA_INTEL=m # CONFIG_SND_HDA_HWDEP is not set CONFIG_SND_HDA_CODEC_REALTEK=y CONFIG_SND_HDA_CODEC_ANALOG=y CONFIG_SND_HDA_CODEC_SIGMATEL=y CONFIG_SND_HDA_CODEC_VIA=y CONFIG_SND_HDA_CODEC_ATIHDMI=y CONFIG_SND_HDA_CODEC_CONEXANT=y CONFIG_SND_HDA_CODEC_CMEDIA=y CONFIG_SND_HDA_CODEC_SI3054=y CONFIG_SND_HDA_GENERIC=y # CONFIG_SND_HDA_POWER_SAVE is not set CONFIG_SND_HDSP=m CONFIG_SND_HDSPM=m CONFIG_SND_ICE1712=m CONFIG_SND_ICE1724=m CONFIG_SND_INTEL8X0=m CONFIG_SND_INTEL8X0M=m CONFIG_SND_KORG1212=m CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL=y CONFIG_SND_MAESTRO3=m CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL=y CONFIG_SND_MIXART=m CONFIG_SND_NM256=m CONFIG_SND_PCXHR=m CONFIG_SND_RIPTIDE=m CONFIG_SND_RME32=m CONFIG_SND_RME96=m CONFIG_SND_RME9652=m CONFIG_SND_SONICVIBES=m CONFIG_SND_TRIDENT=m CONFIG_SND_VIA82XX=m CONFIG_SND_VIA82XX_MODEM=m CONFIG_SND_VX222=m CONFIG_SND_YMFPCI=m CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y # CONFIG_SND_AC97_POWER_SAVE is not set # # SPI devices # # # USB devices # CONFIG_SND_USB_AUDIO=m CONFIG_SND_USB_USX2Y=m # CONFIG_SND_USB_CAIAQ is not set # # PCMCIA devices # CONFIG_SND_VXPOCKET=m CONFIG_SND_PDAUDIOCF=m # # System on Chip audio support # # CONFIG_SND_SOC is not set # # SoC Audio support for SuperH # # # Open Sound System # CONFIG_SOUND_PRIME=m CONFIG_SOUND_TRIDENT=m # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set CONFIG_SOUND_OSS=m # CONFIG_SOUND_TRACEINIT is not set # CONFIG_SOUND_DMAP is not set CONFIG_SOUND_SSCAPE=m CONFIG_SOUND_VMIDI=m CONFIG_SOUND_TRIX=m CONFIG_SOUND_MSS=m CONFIG_SOUND_MPU401=m CONFIG_SOUND_PAS=m CONFIG_SOUND_PSS=m CONFIG_PSS_MIXER=y CONFIG_SOUND_SB=m CONFIG_SOUND_YM3812=m CONFIG_SOUND_UART6850=m CONFIG_SOUND_AEDSP16=m CONFIG_SC6600=y CONFIG_SC6600_JOY=y CONFIG_SC6600_CDROM=4 CONFIG_SC6600_CDROMBASE=0x0 # CONFIG_AEDSP16_MSS is not set # CONFIG_AEDSP16_SBPRO is not set CONFIG_SOUND_KAHLUA=m CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HID_DEBUG=y # CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT_POWERBOOK=y # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y # # USB HID Boot Protocol drivers # CONFIG_USB_KBD=m CONFIG_USB_MOUSE=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_SUSPEND=y # CONFIG_USB_PERSIST is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_ISP116X_HCD=m CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_HCD_SSB is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=m CONFIG_USB_SL811_HCD=m CONFIG_USB_SL811_CS=m # CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_ALAUDA=y # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m CONFIG_USB_MON=y # # USB port drivers # CONFIG_USB_USS720=m # # USB Serial Converter support # CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRCABLE is not set CONFIG_USB_SERIAL_AIRPRIME=m CONFIG_USB_SERIAL_ARK3116=m CONFIG_USB_SERIAL_BELKIN=m # CONFIG_USB_SERIAL_CH341 is not set CONFIG_USB_SERIAL_WHITEHEAT=m CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m CONFIG_USB_SERIAL_CP2101=m CONFIG_USB_SERIAL_CYPRESS_M8=m CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m CONFIG_USB_SERIAL_FUNSOFT=m CONFIG_USB_SERIAL_VISOR=m CONFIG_USB_SERIAL_IPAQ=m CONFIG_USB_SERIAL_IR=m CONFIG_USB_SERIAL_EDGEPORT=m CONFIG_USB_SERIAL_EDGEPORT_TI=m CONFIG_USB_SERIAL_GARMIN=m CONFIG_USB_SERIAL_IPW=m CONFIG_USB_SERIAL_KEYSPAN_PDA=m # CONFIG_USB_SERIAL_KEYSPAN is not set CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m # CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set CONFIG_USB_SERIAL_NAVMAN=m CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_SERIAL_OTI6858 is not set CONFIG_USB_SERIAL_HP4X=m CONFIG_USB_SERIAL_SAFE=m # CONFIG_USB_SERIAL_SAFE_PADDED is not set CONFIG_USB_SERIAL_SIERRAWIRELESS=m CONFIG_USB_SERIAL_TI=m CONFIG_USB_SERIAL_CYBERJACK=m CONFIG_USB_SERIAL_XIRCOM=m CONFIG_USB_SERIAL_OPTION=m CONFIG_USB_SERIAL_OMNINET=m # CONFIG_USB_SERIAL_DEBUG is not set CONFIG_USB_EZUSB=y # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set CONFIG_USB_AUERSWALD=m CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m # CONFIG_USB_BERRY_CHARGE is not set CONFIG_USB_LED=m CONFIG_USB_CYPRESS_CY7C63=m CONFIG_USB_CYTHERM=m # CONFIG_USB_PHIDGET is not set CONFIG_USB_IDMOUSE=m # CONFIG_USB_FTDI_ELAN is not set CONFIG_USB_APPLEDISPLAY=m CONFIG_USB_SISUSBVGA=m CONFIG_USB_SISUSBVGA_CON=y CONFIG_USB_LD=m # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set CONFIG_USB_TEST=m # # USB DSL modem support # CONFIG_USB_ATM=m CONFIG_USB_SPEEDTOUCH=m CONFIG_USB_CXACRU=m CONFIG_USB_UEAGLEATM=m CONFIG_USB_XUSBATM=m # # USB Gadget Support # CONFIG_USB_GADGET=m # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set # CONFIG_USB_GADGET_DEBUG_FS is not set CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_AMD5536UDC is not set # CONFIG_USB_GADGET_ATMEL_USBA is not set # CONFIG_USB_GADGET_FSL_USB2 is not set CONFIG_USB_GADGET_NET2280=y CONFIG_USB_NET2280=m # CONFIG_USB_GADGET_PXA2XX is not set # CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_S3C2410 is not set # CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_ETH_RNDIS=y CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m # CONFIG_USB_FILE_STORAGE_TEST is not set CONFIG_USB_G_SERIAL=m # CONFIG_USB_MIDI_GADGET is not set CONFIG_MMC=m # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # # MMC/SD Card Drivers # CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_SDIO_UART is not set # # MMC/SD Host Controller Drivers # CONFIG_MMC_SDHCI=m # CONFIG_MMC_RICOH_MMC is not set CONFIG_MMC_WBSD=m # CONFIG_MMC_TIFM_SD is not set # CONFIG_MMC_SPI is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m # # LED drivers # # # LED Triggers # CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_IDE_DISK=y CONFIG_LEDS_TRIGGER_HEARTBEAT=m CONFIG_INFINIBAND=m CONFIG_INFINIBAND_USER_MAD=m CONFIG_INFINIBAND_USER_ACCESS=m CONFIG_INFINIBAND_USER_MEM=y CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_MTHCA=m CONFIG_INFINIBAND_MTHCA_DEBUG=y CONFIG_INFINIBAND_IPATH=m # CONFIG_INFINIBAND_AMSO1100 is not set # CONFIG_MLX4_INFINIBAND is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_CM is not set CONFIG_INFINIBAND_IPOIB_DEBUG=y # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=m CONFIG_INFINIBAND_ISER=m # CONFIG_EDAC is not set CONFIG_RTC_LIB=m CONFIG_RTC_CLASS=m # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # CONFIG_RTC_DRV_DS1307=m # CONFIG_RTC_DRV_DS1374 is not set CONFIG_RTC_DRV_DS1672=m # CONFIG_RTC_DRV_MAX6900 is not set CONFIG_RTC_DRV_RS5C372=m CONFIG_RTC_DRV_ISL1208=m CONFIG_RTC_DRV_X1205=m CONFIG_RTC_DRV_PCF8563=m CONFIG_RTC_DRV_PCF8583=m # CONFIG_RTC_DRV_M41T80 is not set # # SPI RTC drivers # CONFIG_RTC_DRV_RS5C348=m CONFIG_RTC_DRV_MAX6902=m # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set CONFIG_RTC_DRV_DS1553=m # CONFIG_RTC_DRV_STK17TA8 is not set CONFIG_RTC_DRV_DS1742=m CONFIG_RTC_DRV_M48T86=m # CONFIG_RTC_DRV_M48T59 is not set CONFIG_RTC_DRV_V3020=m # # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set CONFIG_VIRTUALIZATION=y # CONFIG_KVM is not set # # Userspace I/O # # CONFIG_UIO is not set # # Firmware Drivers # CONFIG_EDD=m CONFIG_DELL_RBU=m CONFIG_DCDBAS=m CONFIG_DMIID=y # # File systems # CONFIG_EXT2_FS=m CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=m CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=m CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set CONFIG_REISERFS_FS_XATTR=y CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y CONFIG_JFS_FS=m CONFIG_JFS_POSIX_ACL=y CONFIG_JFS_SECURITY=y # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y CONFIG_XFS_RT=y # CONFIG_GFS2_FS is not set CONFIG_OCFS2_FS=m CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_MINIX_FS=m CONFIG_ROMFS_FS=m CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y # CONFIG_QUOTA_NETLINK_INTERFACE is not set CONFIG_PRINT_QUOTA_WARNING=y CONFIG_QFMT_V1=m CONFIG_QFMT_V2=m CONFIG_QUOTACTL=y CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_NTFS_FS=m # CONFIG_NTFS_DEBUG is not set CONFIG_NTFS_RW=y # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems # CONFIG_ADFS_FS=m # CONFIG_ADFS_FS_RW is not set CONFIG_AFFS_FS=m # CONFIG_ECRYPT_FS is not set CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_BEFS_FS=m # CONFIG_BEFS_DEBUG is not set CONFIG_BFS_FS=m CONFIG_EFS_FS=m CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set CONFIG_JFFS2_FS_XATTR=y CONFIG_JFFS2_FS_POSIX_ACL=y CONFIG_JFFS2_FS_SECURITY=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y CONFIG_VXFS_FS=m CONFIG_HPFS_FS=m CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=m CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_ACL_SUPPORT=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_SUNRPC_XPRT_RDMA=m # CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=m CONFIG_RPCSEC_GSS_SPKM3=m CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set # CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set CONFIG_NCP_FS=m CONFIG_NCPFS_PACKET_SIGNING=y CONFIG_NCPFS_IOCTL_LOCKING=y CONFIG_NCPFS_STRONG=y CONFIG_NCPFS_NFS_NS=y CONFIG_NCPFS_OS2_NS=y # CONFIG_NCPFS_SMALLDOS is not set CONFIG_NCPFS_NLS=y CONFIG_NCPFS_EXTRAS=y CONFIG_CODA_FS=m # CONFIG_CODA_FS_OLD_API is not set CONFIG_AFS_FS=m # CONFIG_AFS_DEBUG is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y CONFIG_ACORN_PARTITION=y # CONFIG_ACORN_PARTITION_CUMANA is not set # CONFIG_ACORN_PARTITION_EESOX is not set CONFIG_ACORN_PARTITION_ICS=y # CONFIG_ACORN_PARTITION_ADFS is not set # CONFIG_ACORN_PARTITION_POWERTEC is not set CONFIG_ACORN_PARTITION_RISCIX=y CONFIG_OSF_PARTITION=y CONFIG_AMIGA_PARTITION=y CONFIG_ATARI_PARTITION=y CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y CONFIG_LDM_PARTITION=y # CONFIG_LDM_DEBUG is not set CONFIG_SGI_PARTITION=y CONFIG_ULTRIX_PARTITION=y CONFIG_SUN_PARTITION=y CONFIG_KARMA_PARTITION=y CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_CODEPAGE_852=m CONFIG_NLS_CODEPAGE_855=m CONFIG_NLS_CODEPAGE_857=m CONFIG_NLS_CODEPAGE_860=m CONFIG_NLS_CODEPAGE_861=m CONFIG_NLS_CODEPAGE_862=m CONFIG_NLS_CODEPAGE_863=m CONFIG_NLS_CODEPAGE_864=m CONFIG_NLS_CODEPAGE_865=m CONFIG_NLS_CODEPAGE_866=m CONFIG_NLS_CODEPAGE_869=m CONFIG_NLS_CODEPAGE_936=m CONFIG_NLS_CODEPAGE_950=m CONFIG_NLS_CODEPAGE_932=m CONFIG_NLS_CODEPAGE_949=m CONFIG_NLS_CODEPAGE_874=m CONFIG_NLS_ISO8859_8=m CONFIG_NLS_CODEPAGE_1250=m CONFIG_NLS_CODEPAGE_1251=m CONFIG_NLS_ASCII=m CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_2=m CONFIG_NLS_ISO8859_3=m CONFIG_NLS_ISO8859_4=m CONFIG_NLS_ISO8859_5=m CONFIG_NLS_ISO8859_6=m CONFIG_NLS_ISO8859_7=m CONFIG_NLS_ISO8859_9=m CONFIG_NLS_ISO8859_13=m CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # CONFIG_DLM is not set CONFIG_INSTRUMENTATION=y CONFIG_PROFILING=y CONFIG_OPROFILE=m # CONFIG_KPROBES is not set # CONFIG_MARKERS is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_FRAME_POINTER is not set # CONFIG_FORCED_INLINING is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set CONFIG_EARLY_PRINTK=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_RODATA is not set # CONFIG_IOMMU_DEBUG is not set # # Security options # CONFIG_KEYS=y # CONFIG_KEYS_DEBUG_PROC_KEYS is not set CONFIG_SECURITY=y CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y CONFIG_SECURITY_CAPABILITIES=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 # CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m CONFIG_ASYNC_MEMCPY=m CONFIG_ASYNC_XOR=m CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m # CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=m # CONFIG_CRYPTO_FCRYPT is not set CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_TWOFISH_X86_64 is not set CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_AES_X86_64=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m # CONFIG_CRYPTO_SEED is not set CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_TEST=m # CONFIG_CRYPTO_AUTHENC is not set CONFIG_CRYPTO_HW=y # # Library routines # CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_REED_SOLOMON=m CONFIG_REED_SOLOMON_DEC16=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_CHECK_SIGNATURE=y ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Bugme-new] [Bug 10226] New: BusLogic Flashpoint SCSI Adapter not working with x86_64 kernels 2008-03-12 18:20 ` Ulrich Schweitzer @ 2008-03-12 18:36 ` James Bottomley 2008-03-12 18:49 ` Boaz Harrosh 0 siblings, 1 reply; 14+ messages in thread From: James Bottomley @ 2008-03-12 18:36 UTC (permalink / raw) To: Ulrich Schweitzer; +Cc: Boaz Harrosh, Andrew Morton, bugme-daemon, linux-scsi On Wed, 2008-03-12 at 19:20 +0100, Ulrich Schweitzer wrote: > On Wednesday March 12 2008, Boaz Harrosh wrote: > > > An attached config file could help. > > It looks like you need ISA_DMA_API && VIRT_TO_BUS enabled are they? > > They are both enabled, but consider that I didn't customize the kernel in any > way besides changing the processor type to K8 and setting CONFIG_IKCONFIG and > CONFIG_IKCONFIG_PROC. I don't know if I need the options you mentioned. > > I first noticed the problem with a Fedora kernel and compiled this one only to > confirm that the problem exists in the vanilla kernel as well. > > Here is the complete .config: Actually, this is the problem in BusLogic.h: /* FlashPoint support is only available for the Intel x86 Architecture with CONFIG_PCI set. */ #ifndef __i386__ #undef CONFIG_SCSI_OMIT_FLASHPOINT #define CONFIG_SCSI_OMIT_FLASHPOINT #endif #ifndef CONFIG_PCI #undef CONFIG_SCSI_OMIT_FLASHPOINT #define CONFIG_SCSI_OMIT_FLASHPOINT #define BusLogic_InitializeProbeInfoListISA BusLogic_InitializeProbeInfoList #endif Having this dependency logic done in the header file is not very user friendly, but the comment is pretty clear. I can move it to Kconfig, but it will still not work on x86_64 if that comment is accurate. James ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Bugme-new] [Bug 10226] New: BusLogic Flashpoint SCSI Adapter not working with x86_64 kernels 2008-03-12 18:36 ` James Bottomley @ 2008-03-12 18:49 ` Boaz Harrosh 2008-03-12 19:02 ` James Bottomley 0 siblings, 1 reply; 14+ messages in thread From: Boaz Harrosh @ 2008-03-12 18:49 UTC (permalink / raw) To: James Bottomley Cc: Ulrich Schweitzer, Andrew Morton, bugme-daemon, linux-scsi On Wed, Mar 12 2008 at 20:36 +0200, James Bottomley <James.Bottomley@HansenPartnership.com> wrote: > On Wed, 2008-03-12 at 19:20 +0100, Ulrich Schweitzer wrote: >> On Wednesday March 12 2008, Boaz Harrosh wrote: >> >>> An attached config file could help. >>> It looks like you need ISA_DMA_API && VIRT_TO_BUS enabled are they? >> They are both enabled, but consider that I didn't customize the kernel in any >> way besides changing the processor type to K8 and setting CONFIG_IKCONFIG and >> CONFIG_IKCONFIG_PROC. I don't know if I need the options you mentioned. >> >> I first noticed the problem with a Fedora kernel and compiled this one only to >> confirm that the problem exists in the vanilla kernel as well. >> >> Here is the complete .config: > > Actually, this is the problem in BusLogic.h: > > /* > FlashPoint support is only available for the Intel x86 Architecture with > CONFIG_PCI set. > */ > > #ifndef __i386__ > #undef CONFIG_SCSI_OMIT_FLASHPOINT > #define CONFIG_SCSI_OMIT_FLASHPOINT > #endif > > #ifndef CONFIG_PCI > #undef CONFIG_SCSI_OMIT_FLASHPOINT > #define CONFIG_SCSI_OMIT_FLASHPOINT > #define BusLogic_InitializeProbeInfoListISA BusLogic_InitializeProbeInfoList > #endif > > Having this dependency logic done in the header file is not very user > friendly, but the comment is pretty clear. I can move it to Kconfig, > but it will still not work on x86_64 if that comment is accurate. > > James > I think the all thing is total bullshit and should be removed. First it says x86 but that's not what is checked. Second if it is LE bad then it should be possible to be compiled on other ARCHs and problems reported and fixed. There is never a point in not letting it compile. At most a | BROKEN logic in Kconfig. The all thing stinks of Windowism with the capitalized file names and all that stuff. My mailer crashed in the middle of last post so a repost just in case: --- BusLogic: Remove total bullshit. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> git-diff --stat -p drivers/scsi/BusLogic.h | 5 ----- 1 files changed, 0 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/BusLogic.h b/drivers/scsi/BusLogic.h index bfbfb5c..0f0d7f3 100644 --- a/drivers/scsi/BusLogic.h +++ b/drivers/scsi/BusLogic.h @@ -38,11 +38,6 @@ CONFIG_PCI set. */ -#ifndef __i386__ -#undef CONFIG_SCSI_OMIT_FLASHPOINT -#define CONFIG_SCSI_OMIT_FLASHPOINT -#endif - #ifndef CONFIG_PCI #undef CONFIG_SCSI_OMIT_FLASHPOINT #define CONFIG_SCSI_OMIT_FLASHPOINT ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [Bugme-new] [Bug 10226] New: BusLogic Flashpoint SCSI Adapter not working with x86_64 kernels 2008-03-12 18:49 ` Boaz Harrosh @ 2008-03-12 19:02 ` James Bottomley 2008-03-12 20:25 ` Ulrich Schweitzer 0 siblings, 1 reply; 14+ messages in thread From: James Bottomley @ 2008-03-12 19:02 UTC (permalink / raw) To: Boaz Harrosh; +Cc: Ulrich Schweitzer, Andrew Morton, bugme-daemon, linux-scsi On Wed, 2008-03-12 at 20:49 +0200, Boaz Harrosh wrote: > On Wed, Mar 12 2008 at 20:36 +0200, James Bottomley <James.Bottomley@HansenPartnership.com> wrote: > > On Wed, 2008-03-12 at 19:20 +0100, Ulrich Schweitzer wrote: > >> On Wednesday March 12 2008, Boaz Harrosh wrote: > >> > >>> An attached config file could help. > >>> It looks like you need ISA_DMA_API && VIRT_TO_BUS enabled are they? > >> They are both enabled, but consider that I didn't customize the kernel in any > >> way besides changing the processor type to K8 and setting CONFIG_IKCONFIG and > >> CONFIG_IKCONFIG_PROC. I don't know if I need the options you mentioned. > >> > >> I first noticed the problem with a Fedora kernel and compiled this one only to > >> confirm that the problem exists in the vanilla kernel as well. > >> > >> Here is the complete .config: > > > > Actually, this is the problem in BusLogic.h: > > > > /* > > FlashPoint support is only available for the Intel x86 Architecture with > > CONFIG_PCI set. > > */ > > > > #ifndef __i386__ > > #undef CONFIG_SCSI_OMIT_FLASHPOINT > > #define CONFIG_SCSI_OMIT_FLASHPOINT > > #endif > > > > #ifndef CONFIG_PCI > > #undef CONFIG_SCSI_OMIT_FLASHPOINT > > #define CONFIG_SCSI_OMIT_FLASHPOINT > > #define BusLogic_InitializeProbeInfoListISA BusLogic_InitializeProbeInfoList > > #endif > > > > Having this dependency logic done in the header file is not very user > > friendly, but the comment is pretty clear. I can move it to Kconfig, > > but it will still not work on x86_64 if that comment is accurate. > > > > James > > > > I think the all thing is total bullshit and should be removed. First > it says x86 but that's not what is checked. Yes it is ... when this driver was written, i386 and x86 were synonymous. > Second if it is LE bad > then it should be possible to be compiled on other ARCHs and problems > reported and fixed. There is never a point in not letting it compile. This is just a guess ... Flashpoint is 7,700 lines long; be my guest and look in it to see what the problem is. Unfortunately, the original author isn't around to explain the reasoning. However, it seems obvious to me that the packed sccb format will immediately fail on a 64 bit system, so I don't think it's at all safe to blindly enable it. The driver also doesn't look to be big endian safe. > At most a | BROKEN logic in Kconfig. > > The all thing stinks of Windowism with the capitalized file names and all > that stuff. James ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Bugme-new] [Bug 10226] New: BusLogic Flashpoint SCSI Adapter not working with x86_64 kernels 2008-03-12 19:02 ` James Bottomley @ 2008-03-12 20:25 ` Ulrich Schweitzer 2008-03-12 21:35 ` James Bottomley 0 siblings, 1 reply; 14+ messages in thread From: Ulrich Schweitzer @ 2008-03-12 20:25 UTC (permalink / raw) To: James Bottomley; +Cc: Boaz Harrosh, Andrew Morton, bugme-daemon, linux-scsi On Wednesday March 12 2008, James Bottomley wrote: > On Wed, 2008-03-12 at 20:49 +0200, Boaz Harrosh wrote: > > On Wed, Mar 12 2008 at 20:36 +0200, James Bottomley <James.Bottomley@HansenPartnership.com> wrote: > > > Actually, this is the problem in BusLogic.h: > > > > > > /* > > > FlashPoint support is only available for the Intel x86 Architecture > > > with CONFIG_PCI set. > > > */ > > > > > > #ifndef __i386__ > > > #undef CONFIG_SCSI_OMIT_FLASHPOINT > > > #define CONFIG_SCSI_OMIT_FLASHPOINT > > > #endif > > > > > > #ifndef CONFIG_PCI > > > #undef CONFIG_SCSI_OMIT_FLASHPOINT > > > #define CONFIG_SCSI_OMIT_FLASHPOINT > > > #define BusLogic_InitializeProbeInfoListISA > > > BusLogic_InitializeProbeInfoList #endif > > > > > > Having this dependency logic done in the header file is not very user > > > friendly, but the comment is pretty clear. I can move it to Kconfig, > > > but it will still not work on x86_64 if that comment is accurate. > > > > > > James > > > > I think the all thing is total bullshit and should be removed. First > > it says x86 but that's not what is checked. > > Yes it is ... when this driver was written, i386 and x86 were > synonymous. > > > Second if it is LE bad > > then it should be possible to be compiled on other ARCHs and problems > > reported and fixed. There is never a point in not letting it compile. > > This is just a guess ... > > Flashpoint is 7,700 lines long; be my guest and look in it to see what > the problem is. Unfortunately, the original author isn't around to > explain the reasoning. > > However, it seems obvious to me that the packed sccb format will > immediately fail on a 64 bit system, so I don't think it's at all safe > to blindly enable it. The driver also doesn't look to be big endian > safe. You are right. I removed those lines and recompiled the module. Now I get BusLogic: FlashPoint Host Adapter detected at PCI Bus 4 Device 8 BusLogic: I/O Address 0xCC00 PCI Address 0xFDBFE000, but FlashPoint BusLogic: Probe Function failed to validate it. when I try to insert it. Sorry for straying off topic, but this has to be the right crowd to ask: I assume that the driver won't be ported to x86_64 soon (if ever), so I'll need a different SCSI adapter. Is the Adaptec AHA-2940 supported on x86_64 (those are cheap on ebay)? If not, what other, preferably cheap, SE SCSI adapter would you recommend? Ulrich ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Bugme-new] [Bug 10226] New: BusLogic Flashpoint SCSI Adapter not working with x86_64 kernels 2008-03-12 20:25 ` Ulrich Schweitzer @ 2008-03-12 21:35 ` James Bottomley 2008-03-13 6:09 ` Ulrich Schweitzer 0 siblings, 1 reply; 14+ messages in thread From: James Bottomley @ 2008-03-12 21:35 UTC (permalink / raw) To: Ulrich Schweitzer; +Cc: Boaz Harrosh, Andrew Morton, bugme-daemon, linux-scsi On Wed, 2008-03-12 at 21:25 +0100, Ulrich Schweitzer wrote: > Sorry for straying off topic, but this has to be the right crowd to ask: > I assume that the driver won't be ported to x86_64 soon (if ever), Not unless someone volunteers, but FlashPoint.c is huge. > so I'll > need a different SCSI adapter. Is the Adaptec AHA-2940 supported on x86_64 > (those are cheap on ebay)? If not, what other, preferably cheap, SE SCSI > adapter would you recommend? Yes, the adaptec 7xxx/79xx series work fine both on 64 bits and big endian. James ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Bugme-new] [Bug 10226] New: BusLogic Flashpoint SCSI Adapter not working with x86_64 kernels 2008-03-12 21:35 ` James Bottomley @ 2008-03-13 6:09 ` Ulrich Schweitzer 2008-03-13 12:55 ` [Bug 10226] " Matthew Wilcox 0 siblings, 1 reply; 14+ messages in thread From: Ulrich Schweitzer @ 2008-03-13 6:09 UTC (permalink / raw) To: James Bottomley; +Cc: Boaz Harrosh, Andrew Morton, bugme-daemon, linux-scsi On Wednesday March 12 2008, James Bottomley wrote: > On Wed, 2008-03-12 at 21:25 +0100, Ulrich Schweitzer wrote: > > Sorry for straying off topic, but this has to be the right crowd to ask: > > I assume that the driver won't be ported to x86_64 soon (if ever), > > Not unless someone volunteers, but FlashPoint.c is huge. If its not going to be ported, I guess we should add a sentence to the help text of CONFIG_SCSI_BUSLOGIC so people like me don't think its a bug. Something like "Flashpoint Host Adapter support is only available on x86 but not on x86_64 systems." Would one of you please submit such a patch? I've never submitted a kernel patch and don't know how to do it. Ulrich ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Bug 10226] BusLogic Flashpoint SCSI Adapter not working with x86_64 kernels 2008-03-13 6:09 ` Ulrich Schweitzer @ 2008-03-13 12:55 ` Matthew Wilcox 2008-03-13 16:45 ` Christoph Hellwig 0 siblings, 1 reply; 14+ messages in thread From: Matthew Wilcox @ 2008-03-13 12:55 UTC (permalink / raw) To: Ulrich Schweitzer Cc: James Bottomley, Boaz Harrosh, Andrew Morton, bugme-daemon, linux-scsi On Thu, Mar 13, 2008 at 07:09:43AM +0100, Ulrich Schweitzer wrote: > If its not going to be ported, I guess we should add a sentence to the help > text of CONFIG_SCSI_BUSLOGIC so people like me don't think its a bug. > Something like "Flashpoint Host Adapter support is only available on x86 but > not on x86_64 systems." > Would one of you please submit such a patch? I've never submitted a kernel > patch and don't know how to do it. How does this look? I've inverted the sense of the flashpoint config option and neatened up the PCI-less support while I was there. diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c index 4d3ebb1..2d689af 100644 --- a/drivers/scsi/BusLogic.c +++ b/drivers/scsi/BusLogic.c @@ -896,7 +896,7 @@ static int __init BusLogic_InitializeFlashPointProbeInfo(struct BusLogic_HostAda IRQ_Channel = PCI_Device->irq; IO_Address = BaseAddress0 = pci_resource_start(PCI_Device, 0); PCI_Address = BaseAddress1 = pci_resource_start(PCI_Device, 1); -#ifndef CONFIG_SCSI_OMIT_FLASHPOINT +#ifdef CONFIG_SCSI_FLASHPOINT if (pci_resource_flags(PCI_Device, 0) & IORESOURCE_MEM) { BusLogic_Error("BusLogic: Base Address0 0x%X not I/O for " "FlashPoint Host Adapter\n", NULL, BaseAddress0); BusLogic_Error("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, Bus, Device, IO_Address); @@ -1006,6 +1006,9 @@ static void __init BusLogic_InitializeProbeInfoList(struct BusLogic_HostAdapter } +#else +#define BusLogic_InitializeProbeInfoList(adapter) \ + BusLogic_InitializeProbeInfoListISA(adapter) #endif /* CONFIG_PCI */ diff --git a/drivers/scsi/BusLogic.h b/drivers/scsi/BusLogic.h index bfbfb5c..73f237a 100644 --- a/drivers/scsi/BusLogic.h +++ b/drivers/scsi/BusLogic.h @@ -34,23 +34,6 @@ #endif /* - FlashPoint support is only available for the Intel x86 Architecture with - CONFIG_PCI set. -*/ - -#ifndef __i386__ -#undef CONFIG_SCSI_OMIT_FLASHPOINT -#define CONFIG_SCSI_OMIT_FLASHPOINT -#endif - -#ifndef CONFIG_PCI -#undef CONFIG_SCSI_OMIT_FLASHPOINT -#define CONFIG_SCSI_OMIT_FLASHPOINT -#define BusLogic_InitializeProbeInfoListISA BusLogic_InitializeProbeInfoList -#endif - - -/* Define the maximum number of BusLogic Host Adapters supported by this driver. */ @@ -178,7 +161,7 @@ static int BusLogic_HostAdapterAddressCount[3] = { 0, BusLogic_MultiMasterAddres Define macros for testing the Host Adapter Type. */ -#ifndef CONFIG_SCSI_OMIT_FLASHPOINT +#ifdef CONFIG_SCSI_FLASHPOINT #define BusLogic_MultiMasterHostAdapterP(HostAdapter) \ (HostAdapter->HostAdapterType == BusLogic_MultiMaster) @@ -871,7 +854,7 @@ struct BusLogic_CCB { void (*CallbackFunction) (struct BusLogic_CCB *); /* Bytes 40-43 */ u32 BaseAddress; /* Bytes 44-47 */ enum BusLogic_CompletionCode CompletionCode; /* Byte 48 */ -#ifndef CONFIG_SCSI_OMIT_FLASHPOINT +#ifdef CONFIG_SCSI_FLASHPOINT unsigned char:8; /* Byte 49 */ unsigned short OS_Flags; /* Bytes 50-51 */ unsigned char Private[48]; /* Bytes 52-99 */ diff --git a/drivers/scsi/FlashPoint.c b/drivers/scsi/FlashPoint.c index 1c90781..b374e45 100644 --- a/drivers/scsi/FlashPoint.c +++ b/drivers/scsi/FlashPoint.c @@ -16,7 +16,7 @@ */ -#ifndef CONFIG_SCSI_OMIT_FLASHPOINT +#ifdef CONFIG_SCSI_FLASHPOINT #define MAX_CARDS 8 #undef BUSTYPE_PCI @@ -7626,7 +7626,7 @@ FlashPoint__HandleInterrupt(FlashPoint_CardHandle_T CardHandle) #define FlashPoint_InterruptPending FlashPoint__InterruptPending #define FlashPoint_HandleInterrupt FlashPoint__HandleInterrupt -#else /* CONFIG_SCSI_OMIT_FLASHPOINT */ +#else /* !CONFIG_SCSI_FLASHPOINT */ /* Define prototypes for the FlashPoint SCCB Manager Functions. @@ -7641,4 +7641,4 @@ extern bool FlashPoint_InterruptPending(FlashPoint_CardHandle_T); extern int FlashPoint_HandleInterrupt(FlashPoint_CardHandle_T); extern void FlashPoint_ReleaseHostAdapter(FlashPoint_CardHandle_T); -#endif /* CONFIG_SCSI_OMIT_FLASHPOINT */ +#endif /* CONFIG_SCSI_FLASHPOINT */ diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index c46666a..196d7d0 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -588,18 +588,20 @@ config SCSI_BUSLOGIC <http://www.tldp.org/docs.html#howto>, and the files <file:Documentation/scsi/BusLogic.txt> and <file:Documentation/scsi/FlashPoint.txt> for more information. + Note that support for FlashPoint is only available for 32-bit + x86 configurations. To compile this driver as a module, choose M here: the module will be called BusLogic. -config SCSI_OMIT_FLASHPOINT - bool "Omit FlashPoint support" - depends on SCSI_BUSLOGIC +config SCSI_FLASHPOINT + bool "FlashPoint support" + depends on SCSI_BUSLOGIC && PCI && X86_32 help - This option allows you to omit the FlashPoint support from the + This option allows you to add FlashPoint support to the BusLogic SCSI driver. The FlashPoint SCCB Manager code is - substantial, so users of MultiMaster Host Adapters may wish to omit - it. + substantial, so users of MultiMaster Host Adapters may not + wish to include it. config SCSI_DMX3191D tristate "DMX3191D SCSI support" -- Intel are signing my paycheques ... these opinions are still mine "Bill, look, we understand that you're interested in selling us this operating system, but compare it to ours. We can't possibly take such a retrograde step." ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [Bug 10226] BusLogic Flashpoint SCSI Adapter not working with x86_64 kernels 2008-03-13 12:55 ` [Bug 10226] " Matthew Wilcox @ 2008-03-13 16:45 ` Christoph Hellwig 2008-03-13 17:11 ` Matthew Wilcox 0 siblings, 1 reply; 14+ messages in thread From: Christoph Hellwig @ 2008-03-13 16:45 UTC (permalink / raw) To: Matthew Wilcox Cc: Ulrich Schweitzer, James Bottomley, Boaz Harrosh, Andrew Morton, bugme-daemon, linux-scsi On Thu, Mar 13, 2008 at 06:55:08AM -0600, Matthew Wilcox wrote: > How does this look? I've inverted the sense of the flashpoint config > option and neatened up the PCI-less support while I was there. I think it's a good start. Long-term flashpoint should either die or become a driver of it's own - these cards have very little in common with the regular intelligent buslogic cards and if you look at the driver it's full of if (flashpoint) in every major function. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Bug 10226] BusLogic Flashpoint SCSI Adapter not working with x86_64 kernels 2008-03-13 16:45 ` Christoph Hellwig @ 2008-03-13 17:11 ` Matthew Wilcox 2008-03-13 17:15 ` Christoph Hellwig 0 siblings, 1 reply; 14+ messages in thread From: Matthew Wilcox @ 2008-03-13 17:11 UTC (permalink / raw) To: Christoph Hellwig Cc: Ulrich Schweitzer, James Bottomley, Boaz Harrosh, Andrew Morton, bugme-daemon, linux-scsi On Thu, Mar 13, 2008 at 12:45:37PM -0400, Christoph Hellwig wrote: > On Thu, Mar 13, 2008 at 06:55:08AM -0600, Matthew Wilcox wrote: > > How does this look? I've inverted the sense of the flashpoint config > > option and neatened up the PCI-less support while I was there. > > I think it's a good start. Long-term flashpoint should either die or > become a driver of it's own - these cards have very little in common > with the regular intelligent buslogic cards and if you look at the > driver it's full of if (flashpoint) in every major function. Completely agreed about the long term direction. I'm not volunteering to work on this particular obsolescent driver though. Advansys is quite enough trouble for me. -- Intel are signing my paycheques ... these opinions are still mine "Bill, look, we understand that you're interested in selling us this operating system, but compare it to ours. We can't possibly take such a retrograde step." ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Bug 10226] BusLogic Flashpoint SCSI Adapter not working with x86_64 kernels 2008-03-13 17:11 ` Matthew Wilcox @ 2008-03-13 17:15 ` Christoph Hellwig 0 siblings, 0 replies; 14+ messages in thread From: Christoph Hellwig @ 2008-03-13 17:15 UTC (permalink / raw) To: Matthew Wilcox Cc: Christoph Hellwig, Ulrich Schweitzer, James Bottomley, Boaz Harrosh, Andrew Morton, bugme-daemon, linux-scsi On Thu, Mar 13, 2008 at 11:11:35AM -0600, Matthew Wilcox wrote: > On Thu, Mar 13, 2008 at 12:45:37PM -0400, Christoph Hellwig wrote: > > On Thu, Mar 13, 2008 at 06:55:08AM -0600, Matthew Wilcox wrote: > > > How does this look? I've inverted the sense of the flashpoint config > > > option and neatened up the PCI-less support while I was there. > > > > I think it's a good start. Long-term flashpoint should either die or > > become a driver of it's own - these cards have very little in common > > with the regular intelligent buslogic cards and if you look at the > > driver it's full of if (flashpoint) in every major function. > > Completely agreed about the long term direction. > > I'm not volunteering to work on this particular obsolescent driver > though. Advansys is quite enough trouble for me. Yes, that's why I said your patch is a good start :) Anything more than that is not required although it would of course be nice if we could find someone with too much spare time on his/her hand to fix the driver up. Actually a proper driver for the multimaster adapters wouldn't even be a lot of time as this hardware is quite nice (unlike the driver). ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Bugme-new] [Bug 10226] New: BusLogic Flashpoint SCSI Adapter not working with x86_64 kernels 2008-03-11 20:44 ` [Bugme-new] [Bug 10226] New: BusLogic Flashpoint SCSI Adapter not working with x86_64 kernels Andrew Morton 2008-03-12 11:03 ` Boaz Harrosh @ 2008-03-12 11:29 ` James Bottomley 1 sibling, 0 replies; 14+ messages in thread From: James Bottomley @ 2008-03-12 11:29 UTC (permalink / raw) To: Andrew Morton; +Cc: bugme-daemon, linux-scsi, us-, protasnb On Tue, 2008-03-11 at 13:44 -0700, Andrew Morton wrote: > I thought that scsi-related bugzilla reports were being autosent to > linux-scsi but afacit that isn't working. Is it supposed to be? It certainly is ... no-one's watching the bugzilla, so if it's not sending the email, the bug reports will just be getting dropped. I've cc'd Natalie to see if she can investigate the problem. > Anyway, have a bug! We don't appear to have a buslogic maintainer? Not since Leonard Zubkoff, I'm afraid, no. > On Tue, 11 Mar 2008 13:24:49 -0700 (PDT) bugme-daemon@bugzilla.kernel.org wrote: > > > http://bugzilla.kernel.org/show_bug.cgi?id=10226 > > > > Summary: BusLogic Flashpoint SCSI Adapter not working with x86_64 > > kernels > > Product: SCSI Drivers > > Version: 2.5 > > KernelVersion: 2.6.24.3 > > Platform: All > > OS/Version: Linux > > Tree: Mainline > > Status: NEW > > Severity: normal > > Priority: P1 > > Component: BUSLOGIC > > AssignedTo: scsi_drivers-buslogic@kernel-bugs.osdl.org > > ReportedBy: us-@gmx.de > > > > > > Latest working kernel version: unknown > > > > Earliest failing kernel version: unknown (but 2.6.18 fails, too) > > > > Distribution: Debian Etch > > > > Hardware Environment: BusLogic Flashpoint BT-950 UW-SCSI on ASUS M2NPV-VM with > > Athlon64 Brisbane > > > > Software Environment: Minimal Debian installation (just the netinstall image > > plus build environment to be able to build the kernel) > > > > Problem Description: > > BusLogic Flashpoint Adapter doesn't work with kernels compiled for x86_64. > > 'dmesg' shows > > > > BusLogic: FlashPoint Host Adapter detected at PCI Bus 4 Device 8 > > BusLogic: I/O Address 0xCC00 PCI Address 0xFDBFE000, irq 16, but FlashPoint > > BusLogic: support was omitted in this kernel configuration. > > > > even though CONFIG_SCSI_OMIT_FLASHPOINT was not set. > > The SCSi Adapter works fine with a kernel compiled with the same configuration > > for i686. 'dmesg' in that case shows Um, are you sure about that? The kernel source has these particular lines enclosed in #ifndef CONFIG_SCSI_OMIT_FLASHPOINT ... #else print the message you see #endif So that symbol has to be defined somewhere, somehow. Could you do a grep -r SCSI_OMIT_FLASHPOINT . In your kernel build and see what turns up? Thanks, James ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2008-03-13 17:16 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <bug-10226-10286@http.bugzilla.kernel.org/>
2008-03-11 20:44 ` [Bugme-new] [Bug 10226] New: BusLogic Flashpoint SCSI Adapter not working with x86_64 kernels Andrew Morton
2008-03-12 11:03 ` Boaz Harrosh
2008-03-12 18:20 ` Ulrich Schweitzer
2008-03-12 18:36 ` James Bottomley
2008-03-12 18:49 ` Boaz Harrosh
2008-03-12 19:02 ` James Bottomley
2008-03-12 20:25 ` Ulrich Schweitzer
2008-03-12 21:35 ` James Bottomley
2008-03-13 6:09 ` Ulrich Schweitzer
2008-03-13 12:55 ` [Bug 10226] " Matthew Wilcox
2008-03-13 16:45 ` Christoph Hellwig
2008-03-13 17:11 ` Matthew Wilcox
2008-03-13 17:15 ` Christoph Hellwig
2008-03-12 11:29 ` [Bugme-new] [Bug 10226] New: " James Bottomley
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox