From: Boaz Harrosh <bharrosh@panasas.com>
To: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jens Axboe <jens.axboe@oracle.com>,
Christoph Hellwig <hch@infradead.org>,
linux-scsi <linux-scsi@vger.kernel.org>,
Andrew Morton <akpm@linux-foundation.org>
Subject: [PATCH 2/3 ver2] block layer extended-cdb support
Date: Thu, 03 Apr 2008 21:32:06 +0300 [thread overview]
Message-ID: <47F522A6.3080806@panasas.com> (raw)
In-Reply-To: <1207240982.3048.45.camel@localhost.localdomain>
James Bottomley wrote:
> On Tue, 2008-03-25 at 18:32 +0200, Boaz Harrosh wrote:
>> - add varlen_cdb and varlen_cdb_len to hold a large user cdb
>> if needed. They start as empty. Allocation of buffer must
>> be done by user and held until request execution is done.
>> - Since there can be either a fix_length command up to 16 bytes
>> or a variable_length, larger then 16 bytes, commands but never
>> both, we hold the two types in a union to save space. The
>> presence of varlen_cdb_len and cmd_len==0 signals a varlen_cdb
>> mode.
>> - Please use added rq_{set,get}_varlen_cdb() to set every thing
>> up in a way that will not confuse drivers that do not support
>> varlen_cdb's.
>> - Note that this patch does not add any size to struct request
>> since the unsigned cmd_len is split here to 2 ushorts, which
>> is more then enough.
>
> My first observation is that the block stuff all looks a bit
> misnamed ... it's not about variable length commands it's about getting
> block to accept packet commands larger than BLK_MAX_CDB, be they SCSI
> OSD commands or ATA taskfiles.
>
>> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
>> ---
>> block/blk-core.c | 2 ++
>> include/linux/blkdev.h | 27 +++++++++++++++++++++++++--
>> 2 files changed, 27 insertions(+), 2 deletions(-)
>>
>> diff --git a/block/blk-core.c b/block/blk-core.c
>> index 2a438a9..70d32f7 100644
>> --- a/block/blk-core.c
>> +++ b/block/blk-core.c
>> @@ -141,6 +141,8 @@ void rq_init(struct request_queue *q, struct request *rq)
>> rq->end_io = NULL;
>> rq->end_io_data = NULL;
>> rq->next_rq = NULL;
>> + rq->varlen_cdb_len = 0;
>> + rq->varlen_cdb = NULL;
>
> possibly s/varlen/large/
>
>> }
>>
>> static void req_bio_endio(struct request *rq, struct bio *bio,
>> diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
>> index 6f79d40..f829571 100644
>> --- a/include/linux/blkdev.h
>> +++ b/include/linux/blkdev.h
>> @@ -213,8 +213,15 @@ struct request {
>> /*
>> * when request is used as a packet command carrier
>> */
>> - unsigned int cmd_len;
>> - unsigned char cmd[BLK_MAX_CDB];
>> + unsigned short cmd_len;
>> + unsigned short varlen_cdb_len; /* length of varlen_cdb buffer */
>> + union {
>> + unsigned char cmd[BLK_MAX_CDB];
>> + unsigned char *varlen_cdb;/* an optional variable-length cdb.
>> + * points to a user buffer that must
>> + * be valid until end of request
>> + */
>
> again s/varlen/large/
>
>> + };
>>
>> unsigned int data_len;
>> unsigned int extra_len; /* length of alignment and padding */
>> @@ -484,6 +491,22 @@ enum {
>> #define rq_is_sync(rq) (rq_data_dir((rq)) == READ || (rq)->cmd_flags & REQ_RW_SYNC)
>> #define rq_is_meta(rq) ((rq)->cmd_flags & REQ_RW_META)
>>
>> +static inline void rq_set_varlen_cdb(struct request *rq, u8 *cdb, short cdb_len)
>> +{
>> + rq->cmd_len = 0; /* Make sure legacy drivers don't get confused */
>> + rq->varlen_cdb_len = cdb_len;
>> + rq->varlen_cdb = cdb;
>> +}
>> +
>> +/* If ! a varlen_cdb than return NULL */
>> +static inline u8 *rq_get_varlen_cdb(struct request *rq)
>> +{
>> + if (!rq->cmd_len && rq->varlen_cdb_len)
>> + return rq->varlen_cdb;
>> + else
>> + return NULL;
>> +}
>
> These accessors look wrong ... I think what we want is rq_get_cdb and
> rq_set_cdb that handles both <= BLK_MAX_CDB by simply a memcpy and >
> BLK_MAX_CDB by setting up the large_cdb pointer. That way we can
> accessorize the whole lot and the drivers don't have to care about what
> BLK_MAX_CDB is set to (it simply becomes an internal convenience of
> block ... and possibly allows us to eliminate the request carries
> command data entirely).
>
>> static inline int blk_queue_full(struct request_queue *q, int rw)
>> {
>> if (rw == READ)
>
> James
>
>
Thanks James for your review.
With taking Benny's comments into account also, perhaps this is what you meant
(untested, for review, third patch is missing still)
Boaz
---
>From 1da591a5ef9697f37604721bfe437a2609bb8217 Mon Sep 17 00:00:00 2001
From: Boaz Harrosh <bharrosh@panasas.com>
Date: Wed, 31 Oct 2007 14:56:09 +0200
Subject: [PATCH] block layer extended-cdb support
- add ext_cdb and ext_cdb_len to hold a large external cdb
if needed. They start as empty. Allocation of buffer must
be done by user and held until request execution is done.
- Since there can be either a fix_length command up to 16 bytes
or an external extended command but never both, we hold the two
types in a union to save space. The presence of ext_cdb_len!=0
and cmd_len==0 signals an ext_cdb mode.
- Use new rq_set_cdb() to set everything up in a way that will
not confuse drivers that do not support extended cdb's.
- Use rq_get_cdb()/rq_get_cdb_len() to retrieve command and length
in a generic way.
- Once all drivers and users convert to the new accessors the cmd[]
16 bytes buffer can be discarded.
- Note that this patch does not add any size to struct request
since the unsigned cmd_len is split here to 2 ushorts, which
is more then enough.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
---
block/blk-core.c | 2 ++
include/linux/blkdev.h | 41 +++++++++++++++++++++++++++++++++++++++--
2 files changed, 41 insertions(+), 2 deletions(-)
diff --git a/block/blk-core.c b/block/blk-core.c
index 2a438a9..cc9a790 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -141,6 +141,8 @@ void rq_init(struct request_queue *q, struct request *rq)
rq->end_io = NULL;
rq->end_io_data = NULL;
rq->next_rq = NULL;
+ rq->ext_cdb_len = 0;
+ rq->ext_cdb = NULL;
}
static void req_bio_endio(struct request *rq, struct bio *bio,
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 6f79d40..2f87c9d 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -213,8 +213,15 @@ struct request {
/*
* when request is used as a packet command carrier
*/
- unsigned int cmd_len;
- unsigned char cmd[BLK_MAX_CDB];
+ unsigned short cmd_len;
+ unsigned short ext_cdb_len; /* length of ext_cdb buffer */
+ union {
+ unsigned char cmd[BLK_MAX_CDB];
+ unsigned char *ext_cdb;/* an optional extended cdb.
+ * points to a user buffer that must
+ * be valid until end of request
+ */
+ };
unsigned int data_len;
unsigned int extra_len; /* length of alignment and padding */
@@ -484,6 +491,36 @@ enum {
#define rq_is_sync(rq) (rq_data_dir((rq)) == READ || (rq)->cmd_flags & REQ_RW_SYNC)
#define rq_is_meta(rq) ((rq)->cmd_flags & REQ_RW_META)
+static inline void rq_set_cdb(struct request *rq, u8 *cdb, short cdb_len)
+{
+ if (cdb_len <= BLK_MAX_CDB) {
+ memcpy(rq->cmd, cdb, cdb_len);
+ rq->cmd_len = cdb_len;
+ rq->ext_cdb_len = 0;
+ }
+ else {
+ rq->cmd_len = 0; /*Make sure legacy drivers don't get confused*/
+ rq->ext_cdb_len = cdb_len;
+ rq->ext_cdb = cdb;
+ }
+}
+
+static inline u8 *rq_get_cdb(struct request *rq)
+{
+ if (!rq->cmd_len && rq->ext_cdb_len)
+ return rq->ext_cdb;
+ else
+ return rq->cmd;
+}
+
+static inline unsigned short rq_get_cdb_len(struct request *rq)
+{
+ if (!rq->cmd_len && rq->ext_cdb_len)
+ return rq->ext_cdb_len;
+ else
+ return rq->cmd_len;
+}
+
static inline int blk_queue_full(struct request_queue *q, int rw)
{
if (rw == READ)
--
1.5.3.3
next prev parent reply other threads:[~2008-04-03 18:33 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-25 16:21 [PATCHSET 0/3] Is it time for varlen extended and vendor-specific cdbs Boaz Harrosh
2008-03-25 16:22 ` [PATCH] Let scsi_cmnd->cmnd use request->cmd buffer Boaz Harrosh
2008-03-25 16:32 ` [PATCH 2/3] block layer varlen-cdb Boaz Harrosh
2008-04-03 16:43 ` James Bottomley
2008-04-03 17:26 ` Benny Halevy
2008-04-03 18:32 ` Boaz Harrosh [this message]
2008-04-04 11:46 ` [PATCH 2/3 ver2] block layer extended-cdb support Jens Axboe
2008-04-06 9:35 ` Boaz Harrosh
2008-04-06 11:05 ` Boaz Harrosh
2008-04-07 8:31 ` Jens Axboe
2008-04-12 5:52 ` FUJITA Tomonori
2008-04-13 9:13 ` Boaz Harrosh
2008-04-13 16:17 ` FUJITA Tomonori
2008-04-13 16:50 ` Boaz Harrosh
2008-04-14 9:49 ` [PATCH 2/3 ver3] " Boaz Harrosh
2008-04-14 11:04 ` FUJITA Tomonori
2008-04-14 11:28 ` Boaz Harrosh
2008-04-14 12:08 ` FUJITA Tomonori
2008-04-14 12:22 ` Boaz Harrosh
2008-04-14 11:04 ` [PATCH 2/3 ver2] " FUJITA Tomonori
2008-04-14 10:50 ` [PATCH 0/4] add large command support to the block layer FUJITA Tomonori
2008-04-14 10:50 ` [PATCH 1/4] block: no need to initialize rq->cmd in prepare_flush_fn hook FUJITA Tomonori
2008-04-14 10:50 ` [PATCH 2/4] block: no need to initialize rq->cmd with blk_get_request FUJITA Tomonori
2008-04-14 10:50 ` [PATCH 3/4] block: replace sizeof(rq->cmd) with BLK_MAX_CDB FUJITA Tomonori
2008-04-14 10:50 ` [PATCH 4/4] block: add large command support FUJITA Tomonori
2008-04-14 11:29 ` Jens Axboe
2008-04-14 12:08 ` FUJITA Tomonori
2008-04-15 22:50 ` Bartlomiej Zolnierkiewicz
2008-04-15 22:57 ` FUJITA Tomonori
2008-04-16 0:22 ` Bartlomiej Zolnierkiewicz
2008-04-16 8:33 ` Jens Axboe
2008-04-16 9:08 ` Boaz Harrosh
2008-04-16 9:42 ` Jens Axboe
2008-04-16 22:28 ` Bartlomiej Zolnierkiewicz
2008-04-17 3:59 ` FUJITA Tomonori
2008-04-17 7:07 ` Jens Axboe
2008-04-17 11:55 ` Bartlomiej Zolnierkiewicz
2008-04-17 11:58 ` Bartlomiej Zolnierkiewicz
2008-04-17 12:07 ` FUJITA Tomonori
2008-04-17 4:02 ` FUJITA Tomonori
2008-04-14 14:41 ` Pete Wyckoff
2008-04-14 22:33 ` FUJITA Tomonori
2008-04-15 13:44 ` Pete Wyckoff
2008-04-15 7:45 ` Boaz Harrosh
2008-04-15 10:05 ` FUJITA Tomonori
2008-04-15 7:29 ` Jens Axboe
2008-04-14 11:21 ` [PATCH 0/4] add large command support to the block layer FUJITA Tomonori
2008-04-14 11:38 ` Boaz Harrosh
2008-04-14 12:36 ` Boaz Harrosh
2008-04-14 13:06 ` FUJITA Tomonori
2008-04-15 12:24 ` [PATCH 0/3] scsi: variable-length CDBs support Boaz Harrosh
2008-04-15 12:30 ` [PATCH 1/3] Let scsi_cmnd->cmnd use request->cmd buffer Boaz Harrosh
2008-04-15 12:34 ` [PATCH 2/3] scsi: varlen extended and vendor-specific cdbs Boaz Harrosh
2008-04-16 2:09 ` FUJITA Tomonori
2008-04-16 6:40 ` Boaz Harrosh
2008-04-16 6:49 ` [PATCH 2/3 ver2] " Boaz Harrosh
2008-04-17 4:01 ` [PATCH 2/3] " FUJITA Tomonori
2008-04-17 12:25 ` [PATCH 2/3 ver3] " Boaz Harrosh
2008-04-17 12:49 ` Boaz Harrosh
2008-04-17 13:04 ` FUJITA Tomonori
2008-04-17 13:29 ` Boaz Harrosh
2008-04-15 12:37 ` [PATCH 3/3] iscsi_tcp: Enable large commands Boaz Harrosh
2008-04-15 13:08 ` James Smart
2008-04-15 13:38 ` Boaz Harrosh
2008-04-15 13:57 ` Benny Halevy
2008-04-15 13:46 ` FUJITA Tomonori
2008-04-13 14:07 ` [PATCH 2/3 ver2] block layer extended-cdb support James Bottomley
2008-04-13 16:17 ` FUJITA Tomonori
2008-03-25 16:36 ` [PATCH 3/3] scsi: varlen extended and vendor-specific cdbs Boaz Harrosh
2008-04-03 16:07 ` [PATCHSET 0/3] Is it time for " Boaz Harrosh
2008-04-13 16:30 ` [PATCHSET 0/4 ver2] " Boaz Harrosh
2008-04-13 16:37 ` [PATCH 1/4] Let scsi_cmnd->cmnd use request->cmd buffer Boaz Harrosh
2008-04-13 16:39 ` [PATCH 2/4] block layer extended-cdb support Boaz Harrosh
2008-04-13 16:39 ` [PATCH 3/4] scsi: varlen extended and vendor-specific cdbs Boaz Harrosh
2008-04-13 16:41 ` [PATCH 4/4] iscsi_tcp: Enable large command Boaz Harrosh
2008-04-18 17:11 ` Mike Christie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47F522A6.3080806@panasas.com \
--to=bharrosh@panasas.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=akpm@linux-foundation.org \
--cc=hch@infradead.org \
--cc=jens.axboe@oracle.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).