From: Richard Scobie <richard@sauce.co.nz>
To: linux-scsi@vger.kernel.org
Cc: sebastian@wasilewski.name
Subject: Re: mptbase Code={Abort} (LSI SAS1068 PCI-X Fusion-MPT)
Date: Wed, 23 Apr 2008 07:28:45 +1200 [thread overview]
Message-ID: <480E3C6D.5090604@sauce.co.nz> (raw)
I received a reply from LSI:
"It seems there is some bad cable or connectivity or bad device in the
topology. The loginfo 0x31123000 says the I/O is aborted due to a Stuck
Link. The loginfo 0x31120403 specifies the I/O is aborted due to frame
transfer errors."
So far doing large dd reads and writes, I have been unable to generate
any of these errors, it is only during the initial md RAID5 sync up, so
I guess this is going to be a little tricky to pin down.
Regards,
Richard
next reply other threads:[~2008-04-22 19:26 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-22 19:28 Richard Scobie [this message]
2008-04-22 20:02 ` mptbase Code={Abort} (LSI SAS1068 PCI-X Fusion-MPT) Moore, Eric
2008-04-22 20:16 ` Richard Scobie
2008-04-22 23:21 ` Sebastian Wasilewski
-- strict thread matches above, loose matches on Subject: below --
2008-05-02 4:26 Richard Scobie
2008-05-02 22:37 ` Moore, Eric
2008-05-02 22:49 ` Richard Scobie
2008-04-20 19:14 Richard Scobie
2008-04-13 20:47 mptbase Code={Abort} Richard Scobie
2008-04-13 20:54 ` Sebastian Wasilewski
2008-04-20 13:14 ` mptbase Code={Abort} (LSI SAS1068 PCI-X Fusion-MPT) Sebastian Wasilewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=480E3C6D.5090604@sauce.co.nz \
--to=richard@sauce.co.nz \
--cc=linux-scsi@vger.kernel.org \
--cc=sebastian@wasilewski.name \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).