>bus: 05 index 1 mmio: [0xd1000000-0xd6ffffff] bus: 05 index 2 mmio: [0xb0000000-0xcfffffff] bus: 05 index 3 mmio: [0x0-0x0] bus: 06 index 0 io port: [0x2000-0x3fff] bus: 06 index 1 mmio: [0xd1000000-0xd6ffffff] bus: 06 index 2 mmio: [0xb0000000-0xcfffffff] bus: 06 index 3 mmio: [0x0-0x0] bus: 07 index 0 io port: [0x2000-0x2fff] bus: 07 index 1 mmio: [0xd1000000-0xd3ffffff] bus: 07 index 2 mmio: [0xb0000000-0xbfffffff] bus: 07 index 3 mmio: [0x0-0x0] bus: 08 index 0 io port: [0x3000-0x3fff] bus: 08 index 1 mmio: [0xd4000000-0xd6ffffff] bus: 08 index 2 mmio: [0xc0000000-0xcfffffff] bus: 08 index 3 mmio: [0x0-0x0] bus: 09 index 0 io port: [0x4000-0x4fff] bus: 09 index 1 mmio: [0xd0400000-0xd05fffff] bus: 09 index 2 mmio: [0xa4000000-0xa40fffff] bus: 09 index 3 mmio: [0x0-0x0] bus: 0a index 0 io port: [0x4000-0x4fff] bus: 0a index 1 mmio: [0xd0400000-0xd04fffff] bus: 0a index 2 mmio: [0xa4000000-0xa40fffff] bus: 0a index 3 mmio: [0x0-0x0] bus: 0b index 0 mmio: [0x0-0x0] bus: 0b index 1 mmio: [0x0-0x0] bus: 0b index 2 mmio: [0x0-0x0] bus: 0b index 3 mmio: [0x0-0x0] bus: 0f index 0 io port: [0x4000-0x4fff] bus: 0f index 1 mmio: [0xd0400000-0xd04fffff] bus: 0f index 2 mmio: [0xa4000000-0xa40fffff] bus: 0f index 3 mmio: [0x0-0x0] bus: 10 index 0 mmio: [0x0-0x0] bus: 10 index 1 mmio: [0x0-0x0] bus: 10 index 2 mmio: [0x0-0x0] bus: 10 index 3 mmio: [0x0-0x0] bus: 1f index 0 mmio: [0x0-0x0] bus: 1f index 1 mmio: [0x0-0x0] bus: 1f index 2 mmio: [0x0-0x0] bus: 1f index 3 mmio: [0x0-0x0] bus: 20 index 0 io port: [0x5000-0x5fff] bus: 20 index 1 mmio: [0xd0700000-0xd07fffff] bus: 20 index 2 mmio: [0x0-0x0] bus: 20 index 3 io port: [0x00-0xffff] bus: 20 index 4 mmio: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 5098k freed Simple Boot Flag at 0x36 set to 0x80 squashfs: version 3.4 (2008/08/26) Phillip Lougher NTFS driver 2.1.29 [Flags: R/O]. SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem msgmni has been set to 32768 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered (default) pci 0000:08:00.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: found MSI capability pci_express 0000:00:01.0:pcie00: allocate port service pci_express 0000:00:01.0:pcie01: allocate port service pcieport-driver 0000:00:05.0: setting latency timer to 64 pcieport-driver 0000:00:05.0: found MSI capability pci_express 0000:00:05.0:pcie00: allocate port service pci_express 0000:00:05.0:pcie01: allocate port service pcieport-driver 0000:00:09.0: setting latency timer to 64 pcieport-driver 0000:00:09.0: found MSI capability pci_express 0000:00:09.0:pcie00: allocate port service pci_express 0000:00:09.0:pcie01: allocate port service pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:05:00.0: setting latency timer to 64 pcieport-driver 0000:06:00.0: setting latency timer to 64 pcieport-driver 0000:06:02.0: setting latency timer to 64 pcieport-driver 0000:09:00.0: setting latency timer to 64 pci_express 0000:09:00.0:pcie11: allocate port service pcieport-driver 0000:0a:00.0: setting latency timer to 64 pcieport-driver 0000:0a:00.0: found MSI capability pci_express 0000:0a:00.0:pcie21: allocate port service pcieport-driver 0000:0a:02.0: setting latency timer to 64 pcieport-driver 0000:0a:02.0: found MSI capability pci_express 0000:0a:02.0:pcie21: allocate port service aer 0000:00:01.0:pcie01: AER service couldn't init device: no _OSC support aer 0000:00:05.0:pcie01: AER service couldn't init device: no _OSC support aer 0000:00:09.0:pcie01: AER service couldn't init device: no _OSC support intel_rng: FWH not detected Linux agpgart interface v0.103 vesafb: framebuffer at 0xd5000000, mapped to 0xffffc20002100000, using 3072k, total 14336k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module loaded Atheros(R) L2 Ethernet Driver - version 2.2.3 Copyright (c) 2007 Atheros Corporation. jme: JMicron JMC250 gigabit ethernet driver version 1.0.3 input: Macintosh mouse button emulation as /class/input/input0 Uniform Multi-Platform E-IDE driver ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports Probing IDE interface ide0... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... ide1 at 0x170-0x177,0x376 on irq 15 ide-gd driver 1.18 ide-cd driver 5.00 Loading iSCSI transport class v2.0-870. iscsi: registered transport (tcp) Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods SCSI Media Changer driver v0.25 Driver 'ch' needs updating - please use bus_type methods aoe: AoE v47 initialised. PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder TCP cubic registered NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. Freeing unused kernel memory: 380k freed Write protecting the kernel read-only data: 4636k libata version 3.00 loaded. Error: Driver 'pata_platform' is already registered, aborting... ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit pm led pmp slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m1024@0xd0a08400 port 0xd0a08500 irq 23 ata2: SATA max UDMA/133 abar m1024@0xd0a08400 port 0xd0a08580 irq 23 ata3: SATA max UDMA/133 abar m1024@0xd0a08400 port 0xd0a08600 irq 23 ata4: SATA max UDMA/133 abar m1024@0xd0a08400 port 0xd0a08680 irq 23 ata5: SATA max UDMA/133 abar m1024@0xd0a08400 port 0xd0a08700 irq 23 ata6: SATA max UDMA/133 abar m1024@0xd0a08400 port 0xd0a08780 irq 23 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB03, max UDMA/100, ATAPI AN ata1.00: configured for UDMA/100 ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB03 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 sr 0:0:0:0: Attached scsi generic sg0 type 5 arcmsr 0000:02:0e.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ARECA RAID ADAPTER6: FIRMWARE VERSION V1.46 2009-01-06 scsi6 : Areca SATA Host Adapter RAID Controller Driver Version 1.20.00.15 2008/02/27 scsi 6:0:0:0: Direct-Access Areca ARC-1210-VOL#00 R001 PQ: 0 ANSI: 5 scsi 6:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0 sd 6:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). sd 6:0:0:0: [sda] 5859374592 512-byte hardware sectors: (2.99 TB/2.72 TiB) sd 6:0:0:0: [sda] Write Protect is off sd 6:0:0:0: [sda] Mode Sense: cb 00 00 08 sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 6:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). sd 6:0:0:0: [sda] 5859374592 512-byte hardware sectors: (2.99 TB/2.72 TiB) sd 6:0:0:0: [sda] Write Protect is off sd 6:0:0:0: [sda] Mode Sense: cb 00 00 08 sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:scsi: Detection failed (no card) GDT-HA: Storage RAID Controller Driver. Version: 3.05 Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation sda1 sda2 sd 6:0:0:0: [sda] Attached SCSI disk sd 6:0:0:0: Attached scsi generic sg1 type 0 scsi 6:0:16:0: Attached scsi generic sg2 type 3 Fusion MPT SPI Host driver 3.04.07 Fusion MPT FC Host driver 3.04.07 Fusion MPT SAS Host driver 3.04.07 3ware Storage Controller device driver for Linux v1.26.02.002. 3ware 9000 Storage Controller device driver for Linux v2.26.02.011. Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 3.6.20) Adaptec aacraid driver 1.1-5[2456]-ms megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 QLogic Fibre Channel HBA Driver: 8.02.01-k9 Emulex LightPulse Fibre Channel SCSI driver 8.2.8 Copyright(c) 2004-2008 Emulex. All rights reserved. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd0a08000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.28-gentoo-r5 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.28-gentoo-r5 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.28-gentoo-r5 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.28-gentoo-r5 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.28-gentoo-r5 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver sl811: driver sl811-hcd, 19 May 2005 ohci1394 0000:20:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[d0700000-d07007ff] Max Packet=[2048] IR/IT contexts=[4/8] device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com usb 2-1: new low speed USB device using uhci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice md: raid0 personality registered for level 0 input: HID 046a:0011 as /class/input/input1 md: raid1 personality registered for level 1 generic-usb 0003:046A:0011.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:1d.0-1/input0 usb 2-1: New USB device found, idVendor=046a, idProduct=0011 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 async_tx: api initialized (async) xor: automatically using best checksumming function: generic_sse generic_sse: 9179.200 MB/sec xor: using function: generic_sse (9179.200 MB/sec) raid6: int64x1 1995 MB/s usb 2-2: new low speed USB device using uhci_hcd and address 3 raid6: int64x2 2666 MB/s usb 2-2: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 raid6: int64x4 2180 MB/s raid6: int64x8 1833 MB/s ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e081000029240c] raid6: sse2x1 2967 MB/s raid6: sse2x2 5755 MB/s raid6: sse2x4 6659 MB/s raid6: using algorithm sse2x4 (6659 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: raid10 personality registered for level 10 generic-usb 0003:046D:C040.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2/input0 usb 2-2: New USB device found, idVendor=046d, idProduct=c040 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: USB-PS/2 Optical Mouse usb 2-2: Manufacturer: Logitech JFS: nTxBlock = 8192, nTxLock = 65536 Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. EXT4-fs: Update your userspace programs to mount using ext4 EXT4-fs: ext4dev backwards compatibility will go away by 2.6.31 ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 0:0:0:0: [sr0] Sense Key : Medium Error [current] sr 0:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error end_request: I/O error, dev sr0, sector 188520 Buffer I/O error on device sr0, logical block 47130 Buffer I/O error on device sr0, logical block 47131 sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 0:0:0:0: [sr0] Sense Key : Medium Error [current] sr 0:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error end_request: I/O error, dev sr0, sector 188520 Buffer I/O error on device sr0, logical block 47130 Buffer I/O error on device sr0, logical block 47131 sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 0:0:0:0: [sr0] Sense Key : Medium Error [current] sr 0:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error end_request: I/O error, dev sr0, sector 188520 Buffer I/O error on device sr0, logical block 47130 Buffer I/O error on device sr0, logical block 47131 sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 0:0:0:0: [sr0] Sense Key : Medium Error [current] sr 0:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error end_request: I/O error, dev sr0, sector 188520 Buffer I/O error on device sr0, logical block 47130 Buffer I/O error on device sr0, logical block 47131 sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 0:0:0:0: [sr0] Sense Key : Medium Error [current] sr 0:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error end_request: I/O error, dev sr0, sector 188520 Buffer I/O error on device sr0, logical block 47130 Buffer I/O error on device sr0, logical block 47131 sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 0:0:0:0: [sr0] Sense Key : Medium Error [current] sr 0:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error end_request: I/O error, dev sr0, sector 188520 Buffer I/O error on device sr0, logical block 47130 Buffer I/O error on device sr0, logical block 47131 sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 0:0:0:0: [sr0] Sense Key : Medium Error [current] sr 0:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error end_request: I/O error, dev sr0, sector 188520 Buffer I/O error on device sr0, logical block 47130 Buffer I/O error on device sr0, logical block 47131 sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 0:0:0:0: [sr0] Sense Key : Medium Error [current] sr 0:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error end_request: I/O error, dev sr0, sector 188520 Buffer I/O error on device sr0, logical block 47130 Buffer I/O error on device sr0, logical block 47131 sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 0:0:0:0: [sr0] Sense Key : Medium Error [current] sr 0:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error end_request: I/O error, dev sr0, sector 188520 Buffer I/O error on device sr0, logical block 47130 Buffer I/O error on device sr0, logical block 47131 Real Time Clock Driver v1.12ac warning: process `hwsetup' used the deprecated sysctl system call with 1.23. e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:0f:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 e1000e 0000:0f:00.0: setting latency timer to 64 0000:0f:00.0: 0000:0f:00.0: Failed to initialize MSI interrupts. Falling back to legacy interrupts. 0000:0f:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b3:49:72 0000:0f:00.0: eth0: Intel(R) PRO/1000 Network Connection 0000:0f:00.0: eth0: MAC: 4, PHY: 5, PBA No: ffffff-0ff e1000e 0000:0f:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 e1000e 0000:0f:00.1: setting latency timer to 64 0000:0f:00.1: 0000:0f:00.1: Failed to initialize MSI interrupts. Falling back to legacy interrupts. 0000:0f:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b3:49:73 0000:0f:00.1: eth1: Intel(R) PRO/1000 Network Connection 0000:0f:00.1: eth1: MAC: 4, PHY: 5, PBA No: ffffff-0ff processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) processor ACPI_CPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) processor ACPI_CPU:02: registered as cooling_device2 ACPI: Processor [CPU2] (supports 8 throttling states) processor ACPI_CPU:03: registered as cooling_device3 ACPI: Processor [CPU3] (supports 8 throttling states) processor ACPI_CPU:04: registered as cooling_device4 ACPI: Processor [CPU4] (supports 8 throttling states) processor ACPI_CPU:05: registered as cooling_device5 ACPI: Processor [CPU5] (supports 8 throttling states) processor ACPI_CPU:06: registered as cooling_device6 ACPI: Processor [CPU6] (supports 8 throttling states) processor ACPI_CPU:07: registered as cooling_device7 ACPI: Processor [CPU7] (supports 8 throttling states) input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input4 ACPI: Power Button (CM) [PWRB] 0000:0f:00.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. EXT4-fs: barriers enabled kjournald2 starting. Commit interval 5 seconds EXT4 FS on sda2, internal journal on sda2:8 EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled ext4_orphan_cleanup: deleting unreferenced inode 206984 ext4_orphan_cleanup: deleting unreferenced inode 203101 ext4_orphan_cleanup: deleting unreferenced inode 211513 ext4_orphan_cleanup: deleting unreferenced inode 211518 ext4_orphan_cleanup: deleting unreferenced inode 33007 EXT4-fs: sda2: 5 orphan inodes deleted EXT4-fs: recovery complete. EXT4-fs: mounted filesystem with ordered data mode. arcmsr6: abort device command of scsi id = 0 lun = 0 arcmsr6: abort device command of scsi id = 0 lun = 0 arcmsr6: abort device command of scsi id = 0 lun = 0 arcmsr6: abort device command of scsi id = 0 lun = 0 arcmsr6: abort device command of scsi id = 0 lun = 0 INFO: task kjournald:17619 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kjournald D ffffffff8056b260 0 17619 2 ffff880ffdc2fce0 0000000000000046 ffff880fff99c400 00000010fd746a88 ffffffff807f4c00 ffff880ffd6bd800 ffff880ffd521380 ffff880ffdbdb750 ffff880fff921190 ffff880ffdbdb978 0000000300000287 ffff880ffdbdb978 Call Trace: [] scsi_request_fn+0x401/0x4c4 [] del_timer+0x51/0x5a [] sync_buffer+0x0/0x3f [] io_schedule+0x2d/0x39 [] sync_buffer+0x3b/0x3f [] __wait_on_bit+0x41/0x70 [] sync_buffer+0x0/0x3f [] out_of_line_wait_on_bit+0x6b/0x77 [] wake_bit_function+0x0/0x23 [] journal_commit_transaction+0x4a6/0xd65 [] lock_timer_base+0x26/0x4b [] try_to_del_timer_sync+0x52/0x5b [] kjournald+0xdf/0x202 [] autoremove_wake_function+0x0/0x2e [] kjournald+0x0/0x202 [] kthread+0x47/0x73 [] schedule_tail+0x27/0x5f [] child_rip+0xa/0x11 [] kthread+0x0/0x73 [] child_rip+0x0/0x11 INFO: task kjournald2:17621 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kjournald2 D ffffffff8056b260 0 17621 2 ffff880ffdfcbc50 0000000000000046 0000000000001000 ffffffff803fa64d ffffffff807f4c00 ffff880ffe52e340 0000000000011210 ffff880fff164bd0 ffff880fff959750 ffff880fff164df8 0000000400001000 ffff880fff164df8 Call Trace: [] __make_request+0x395/0x3fb [] generic_make_request+0x252/0x295 [] sync_buffer+0x0/0x3f [] io_schedule+0x2d/0x39 [] sync_buffer+0x3b/0x3f [] __wait_on_bit+0x41/0x70 [] sync_buffer+0x0/0x3f [] out_of_line_wait_on_bit+0x6b/0x77 [] wake_bit_function+0x0/0x23 [] jbd2_journal_commit_transaction+0xa6f/0xf9b [] dequeue_task_fair+0x45/0x144 [] lock_timer_base+0x26/0x4b [] kjournald2+0xdf/0x202 [] autoremove_wake_function+0x0/0x2e [] kjournald2+0x0/0x202 [] kthread+0x47/0x73 [] schedule_tail+0x27/0x5f [] child_rip+0xa/0x11 [] generic_unplug_device+0x0/0x2d [] kthread+0x0/0x73 [] child_rip+0x0/0x11 arcmsr6: abort device command of scsi id = 0 lun = 0 sd 6:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT,SUGGEST_OK end_request: I/O error, dev sda, sector 79084887 Buffer I/O error on device sda1, logical block 9885603 lost page write due to I/O error on sda1 Buffer I/O error on device sda1, logical block 9885604 lost page write due to I/O error on sda1 Buffer I/O error on device sda1, logical block 9885605 lost page write due to I/O error on sda1 Buffer I/O error on device sda1, logical block 9885606 lost page write due to I/O error on sda1 Buffer I/O error on device sda1, logical block 9885607 lost page write due to I/O error on sda1 Buffer I/O error on device sda1, logical block 9885608 lost page write due to I/O error on sda1 Buffer I/O error on device sda1, logical block 9885609 lost page write due to I/O error on sda1 Buffer I/O error on device sda1, logical block 9885610 lost page write due to I/O error on sda1 Buffer I/O error on device sda1, logical block 9885611 lost page write due to I/O error on sda1 Buffer I/O error on device sda1, logical block 9885612 lost page write due to I/O error on sda1 JBD: Detected IO errors while flushing file data on sda1 arcmsr6: abort device command of scsi id = 0 lun = 0 arcmsr6: abort device command of scsi id = 0 lun = 0 arcmsr6: abort device command of scsi id = 0 lun = 0 INFO: task kjournald2:17621 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kjournald2 D ffffffff8056b260 0 17621 2 ffff880ffdfcbc50 0000000000000046 0000000000001000 ffffffff803fa64d ffffffff807f4c00 ffff880ffe52e340 0000000000011210 ffff880fff164bd0 ffff880fff959750 ffff880fff164df8 0000000400001000 ffff880fff164df8 Call Trace: [] __make_request+0x395/0x3fb [] generic_make_request+0x252/0x295 [] sync_buffer+0x0/0x3f [] io_schedule+0x2d/0x39 [] sync_buffer+0x3b/0x3f [] __wait_on_bit+0x41/0x70 [] sync_buffer+0x0/0x3f [] out_of_line_wait_on_bit+0x6b/0x77 [] wake_bit_function+0x0/0x23 [] jbd2_journal_commit_transaction+0xa6f/0xf9b [] dequeue_task_fair+0x45/0x144 [] lock_timer_base+0x26/0x4b [] kjournald2+0xdf/0x202 [] autoremove_wake_function+0x0/0x2e [] kjournald2+0x0/0x202 [] kthread+0x47/0x73 [] schedule_tail+0x27/0x5f [] child_rip+0xa/0x11 [] generic_unplug_device+0x0/0x2d [] kthread+0x0/0x73 [] child_rip+0x0/0x11 arcmsr6: abort device command of scsi id = 0 lun = 0 INFO: task shutdown:17663 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. shutdown D ffff88002808e388 0 17663 1 ffff880ffe765a98 0000000000000086 0000000000000001 000000018025a875 ffffffff807f4c00 0000000000000000 ffff880ff95d9a40 ffff880fffbaf910 ffff880fffbae310 ffff880fffbafb38 00000006806f1b80 ffff880fffbafb38 Call Trace: [] __alloc_pages_internal+0xd1/0x401 [] io_schedule+0x2d/0x39 [] get_request_wait+0x93/0x122 [] autoremove_wake_function+0x0/0x2e [] __make_request+0x307/0x3fb [] mempool_alloc+0x3f/0xf5 [] generic_make_request+0x252/0x295 [] submit_bio+0xaa/0xb1 [] submit_bh+0xde/0xfe [] __block_write_full_page+0x1c5/0x2a8 [] blkdev_get_block+0x0/0x57 [] __writepage+0xa/0x25 [] write_cache_pages+0x206/0x322 [] __writepage+0x0/0x25 [] do_writepages+0x20/0x2d [] __writeback_single_inode+0x18b/0x394 [] generic_sync_sb_inodes+0x2a7/0x439 [] sync_inodes_sb+0x83/0x88 [] __sync_inodes+0x46/0x8f [] sync_inodes+0xa/0x1b [] do_sync+0x12/0x50 [] sys_sync+0xe/0x14 [] system_call_fastpath+0x16/0x1b INFO: task kjournald:17619 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kjournald D ffffffff8056b260 0 17619 2 ffff880ffdc2fc00 0000000000000046 0000000000000001 0000000000000000 ffffffff807f4c00 ffffffff802e5b8f ffffffff807f1f00 ffff880ffdbdb750 ffff880fff921190 ffff880ffdbdb978 00000003fdc2fd10 ffff880ffdbdb978 Call Trace: [] ext3_get_blocks_handle+0x7fb/0x824 [] io_schedule+0x2d/0x39 [] get_request_wait+0x93/0x122 [] autoremove_wake_function+0x0/0x2e [] __make_request+0x307/0x3fb [] mempool_alloc+0x3f/0xf5 [] generic_make_request+0x252/0x295 [] submit_bio+0xaa/0xb1 [] submit_bh+0xde/0xfe [] journal_commit_transaction+0x859/0xd65 [] lock_timer_base+0x26/0x4b [] kjournald+0xdf/0x202 [] autoremove_wake_function+0x0/0x2e [] kjournald+0x0/0x202 [] kthread+0x47/0x73 [] schedule_tail+0x27/0x5f [] child_rip+0xa/0x11 [] kthread+0x0/0x73 [] child_rip+0x0/0x11 arcmsr6: abort device command of scsi id = 0 lun = 0 arcmsr6: abort device command of scsi id = 0 lun = 0 sd 6:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT,SUGGEST_OK end_request: I/O error, dev sda, sector 842648445 end_request: I/O error, dev sda, sector 842648445 Aborting journal on device sda2:8.