Re: ses enclosure stuff not working with Promise Vtrak J610S JBOD

[John Hughes <john@Calva.COM>]

John Hughes wrote:
> Like Lars Täuber last year I have a Promise Vtrak J610S "just a bunch 
> of disks" cabinet, and like him I find that the ses enclosure services 
> don't seem to be working right.
The problem may not be related to the Promise box, in the same machine I 
have a built-in enclosure (It's a Dell R710):

[    1.461216] scsi 0:0:32:0: Enclosure         DP       BACKPLANE        1.07 PQ: 0 ANSI: 5
[    1.472957] scsi 0:2:0:0: Direct-Access     DELL     PERC 6/i         1.21 PQ: 0 ANSI: 5
[    1.492211] sd 0:2:0:0: [sda] 285474816 512-byte logical blocks: (146 GB/136 GiB)
[    1.492299] sd 0:2:0:0: [sda] Write Protect is off
[    1.492302] sd 0:2:0:0: [sda] Mode Sense: 1f 00 10 08
[    1.492354] sd 0:2:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[    1.492564]  sda: sda1 sda2 sda3 sda4
[    1.493167] sd 0:2:0:0: [sda] Attached SCSI disk


But when I look in /sys/class/enclosure/0:0:32:0 I find no devices, and 
in /sys/block/sda/device I see no trace of the enclosure.

This is with 2.6.31.


--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html