From: John Hughes <john@Calva.COM>
To: James Bottomley <James.Bottomley@suse.de>
Cc: linux-scsi@vger.kernel.org
Subject: Re: ses enclosure stuff not working with Promise Vtrak J610S JBOD
Date: Wed, 04 Nov 2009 17:12:23 +0100 [thread overview]
Message-ID: <4AF1A7E7.7070307@Calva.COM> (raw)
In-Reply-To: <1257350834.2697.52.camel@mulgrave.site>
James Bottomley wrote:
> Could you tell me what the enclosure page 0 (supported diagnostic pages)
> and page 10 (additional information page that allows us to do the
> matching) say? I suspect the enclosure either doesn't support the page
> needed for the matching or there's some problem with the way the
> information is encoded.
>
Ok, here we go. (I wonder whether the "<<<additional: response too
short>>>" at the end of page 10 has something to do with the problem).
# sg_ses -p 0 /dev/sg17
PROMISE 3U-SAS-16-D BP 0107
enclosure services device
Supported diagnostic pages:
Supported diagnostic pages [0x0]
Configuration (SES) [0x1]
Enclosure status/control (SES) [0x2]
Threshold In/Out (SES) [0x5]
Enclosure busy (SES-2) [0x9]
Additional (device) element status (SES-2) [0xa]
# sg_ses -p 10 /dev/sg17
PROMISE 3U-SAS-16-D BP 0107
enclosure services device
Additional (device) element status diagnostic page:
generation code: 0x0
Element type: Array device, subenclosure id: 0
element index: 0 [0x0]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 1
phy index: 0
device type: end device
initiator port for:
target port for: SSP
attached SAS address: 0x5000155359a7723f
SAS address: 0x5000c50012b081fd
phy identifier: 0x0
element index: 1 [0x1]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 2
phy index: 0
device type: end device
initiator port for:
target port for: SSP
attached SAS address: 0x5000155359a7723f
SAS address: 0x5000c50012b07c69
phy identifier: 0x0
element index: 2 [0x2]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 3
phy index: 0
device type: end device
initiator port for:
target port for: SSP
attached SAS address: 0x5000155359a7723f
SAS address: 0x5000c50012af7b95
phy identifier: 0x0
element index: 3 [0x3]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 4
phy index: 0
device type: end device
initiator port for:
target port for: SSP
attached SAS address: 0x5000155359a7723f
SAS address: 0x5000c50012ac04dd
phy identifier: 0x0
element index: 4 [0x4]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 5
phy index: 0
device type: no device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x5000155359a7723f
SAS address: 0x5000155359a77204
phy identifier: 0x0
element index: 5 [0x5]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 6
phy index: 0
device type: end device
initiator port for:
target port for: SSP
attached SAS address: 0x5000155359a7723f
SAS address: 0x5000c50012b020a9
phy identifier: 0x0
element index: 6 [0x6]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 7
phy index: 0
device type: end device
initiator port for:
target port for: SSP
attached SAS address: 0x5000155359a7723f
SAS address: 0x5000c50012b069c1
phy identifier: 0x0
element index: 7 [0x7]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 8
phy index: 0
device type: end device
initiator port for:
target port for: SSP
attached SAS address: 0x5000155359a7723f
SAS address: 0x5000c50012b0658d
phy identifier: 0x0
element index: 8 [0x8]
flagged as invalid (no further information)
element index: 9 [0x9]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 10
phy index: 0
device type: end device
initiator port for:
target port for: SSP
attached SAS address: 0x5000155359a7723f
SAS address: 0x5000c50012b05a69
phy identifier: 0x0
element index: 10 [0xa]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 11
phy index: 0
device type: end device
initiator port for:
target port for: SSP
attached SAS address: 0x5000155359a7723f
SAS address: 0x5000c50012b071e5
phy identifier: 0x0
element index: 11 [0xb]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 12
phy index: 0
device type: end device
initiator port for:
target port for: SSP
attached SAS address: 0x5000155359a7723f
SAS address: 0x5000c50012b0815d
phy identifier: 0x0
element index: 12 [0xc]
flagged as invalid (no further information)
element index: 13 [0xd]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 14
phy index: 0
device type: end device
initiator port for:
target port for: SSP
attached SAS address: 0x5000155359a7723f
SAS address: 0x5000c50012a76085
phy identifier: 0x0
element index: 14 [0xe]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 15
phy index: 0
device type: end device
initiator port for:
target port for: SSP
attached SAS address: 0x5000155359a7723f
SAS address: 0x5000c50012b07459
phy identifier: 0x0
element index: 15 [0xf]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 16
phy index: 0
device type: end device
initiator port for:
target port for: SSP
attached SAS address: 0x5000155359a7723f
SAS address: 0x5000c50012a82989
phy identifier: 0x0
Element type: Enclosure services controller electronics, subenclosure id: 0
element index: 38 [0x26]
Transport protocol: SAS
number of phys: 24
phy index: 0
phy identifier: 0x50
connector element index: 21, other element index: 83
SAS address: 0x59a7723f28002a01
phy index: 1
phy identifier: 0x2c
connector element index: 46, other element index: 3
SAS address: 0x3004320534063607
phy index: 2
phy identifier: 0x38
connector element index: 58, other element index: 9
SAS address: 0x3c0a3e0b400c420d
phy index: 3
phy identifier: 0x44
connector element index: 70, other element index: 15
SAS address: 0x48ff49ff4aff4bff
phy index: 4
phy identifier: 0x4c
connector element index: 77
SAS address: 0x4eff4fff163e0027
phy index: 5
phy identifier: 0x18
connector element index: 0, other element index: 0
SAS address: 0x5000155359a7733f
phy index: 6
phy identifier: 0x29
connector element index: 43, other element index: 1
SAS address: 0x2d022f0331043305
phy index: 7
phy identifier: 0x35
connector element index: 55, other element index: 7
SAS address: 0x39083b093d0a3f0b
phy index: 8
phy identifier: 0x41
connector element index: 67, other element index: 13
SAS address: 0x450e470f50ff51ff
phy index: 9
phy identifier: 0x52
connector element index: 83
SAS address: 0x54ff55ff56ff57ff
phy index: 10
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 11
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 12
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 13
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 14
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 15
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 16
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 17
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 18
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 19
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 20
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 21
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 22
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 23
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
element index: 39 [0x27]
Transport protocol: SAS
number of phys: 24
phy index: 0
phy identifier: 0x50
connector element index: 21, other element index: 83
SAS address: 0x59a7733f29002b01
phy index: 1
phy identifier: 0x2d
connector element index: 47, other element index: 3
SAS address: 0x3104330535063707
phy index: 2
phy identifier: 0x39
connector element index: 59, other element index: 9
SAS address: 0x3d0a3f0b410c430d
phy index: 3
phy identifier: 0x45
connector element index: 71, other element index: 15
SAS address: 0x50ff51ff52ff53ff
phy index: 4
phy identifier: 0x54
connector element index: 85
SAS address: 0x56ff57ff00000000
phy index: 5
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 6
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 7
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 8
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 9
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 10
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 11
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 12
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 13
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 14
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 15
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 16
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 17
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 18
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 19
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 20
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 21
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 22
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 23
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
<<<additional: response too short>>>
next prev parent reply other threads:[~2009-11-04 16:12 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-04 13:00 ses enclosure stuff not working with Promise Vtrak J610S JBOD John Hughes
2009-11-04 15:17 ` John Hughes
2009-11-04 15:22 ` James Bottomley
2009-11-04 15:53 ` John Hughes
2009-11-04 16:07 ` James Bottomley
2009-11-04 16:12 ` John Hughes [this message]
2009-11-04 16:20 ` James Bottomley
2009-11-04 18:01 ` John Hughes
2009-11-04 18:05 ` James Bottomley
2009-11-04 18:10 ` John Hughes
2009-11-05 9:41 ` John Hughes
2009-11-05 15:30 ` John Hughes
2009-11-05 15:44 ` James Bottomley
2009-11-04 15:51 ` John Hughes
2009-11-04 16:54 ` John Hughes
2009-11-04 16:55 ` John Hughes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AF1A7E7.7070307@Calva.COM \
--to=john@calva.com \
--cc=James.Bottomley@suse.de \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox