public inbox for linux-scsi@vger.kernel.org
 help / color / mirror / Atom feed
From: Wayne Boyer <wayneb@linux.vnet.ibm.com>
To: James Bottomley <James.Bottomley@suse.de>
Cc: linux-scsi <linux-scsi@vger.kernel.org>,
	Brian King <brking@linux.vnet.ibm.com>
Subject: [patch 8/9] ipr: add support for new IOASCs
Date: Fri, 19 Feb 2010 13:24:32 -0800	[thread overview]
Message-ID: <4B7F0190.9040009@linux.vnet.ibm.com> (raw)
In-Reply-To: <20100219210900.066268168@linux.vnet.ibm.com>

This patch adds support for new errors that can be received from adapters
using the next generation 64 bit IOA PCI interface chip.

Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com>
---
 drivers/scsi/ipr.c |   32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

Index: b/drivers/scsi/ipr.c
===================================================================
--- a/drivers/scsi/ipr.c	2010-02-19 12:52:30.000000000 -0800
+++ b/drivers/scsi/ipr.c	2010-02-19 13:00:51.000000000 -0800
@@ -222,6 +222,20 @@ struct ipr_error_table_t ipr_error_table
 	"FFFE: Soft device bus error recovered by the IOA"},
 	{0x01088100, 0, IPR_DEFAULT_LOG_LEVEL,
 	"4101: Soft device bus fabric error"},
+	{0x01100100, 0, IPR_DEFAULT_LOG_LEVEL,
+	"FFFC: Logical block guard error recovered by the device"},
+	{0x01100300, 0, IPR_DEFAULT_LOG_LEVEL,
+	"FFFC: Logical block reference tag error recovered by the device"},
+	{0x01108300, 0, IPR_DEFAULT_LOG_LEVEL,
+	"4171: Recovered scatter list tag / sequence number error"},
+	{0x01109000, 0, IPR_DEFAULT_LOG_LEVEL,
+	"FF3D: Recovered logical block CRC error on IOA to Host transfer"},
+	{0x01109200, 0, IPR_DEFAULT_LOG_LEVEL,
+	"4171: Recovered logical block sequence number error on IOA to Host transfer"},
+	{0x0110A000, 0, IPR_DEFAULT_LOG_LEVEL,
+	"FFFD: Recovered logical block reference tag error detected by the IOA"},
+	{0x0110A100, 0, IPR_DEFAULT_LOG_LEVEL,
+	"FFFD: Logical block guard error recovered by the IOA"},
 	{0x01170600, 0, IPR_DEFAULT_LOG_LEVEL,
 	"FFF9: Device sector reassign successful"},
 	{0x01170900, 0, IPR_DEFAULT_LOG_LEVEL,
@@ -278,12 +292,28 @@ struct ipr_error_table_t ipr_error_table
 	"3120: SCSI bus is not operational"},
 	{0x04088100, 0, IPR_DEFAULT_LOG_LEVEL,
 	"4100: Hard device bus fabric error"},
+	{0x04100100, 0, IPR_DEFAULT_LOG_LEVEL,
+	"310C: Logical block guard error detected by the device"},
+	{0x04100300, 0, IPR_DEFAULT_LOG_LEVEL,
+	"310C: Logical block reference tag error detected by the device"},
+	{0x04108300, 1, IPR_DEFAULT_LOG_LEVEL,
+	"4170: Scatter list tag / sequence number error"},
+	{0x04109000, 1, IPR_DEFAULT_LOG_LEVEL,
+	"8150: Logical block CRC error on IOA to Host transfer"},
+	{0x04109200, 1, IPR_DEFAULT_LOG_LEVEL,
+	"4170: Logical block sequence number error on IOA to Host transfer"},
+	{0x0410A000, 0, IPR_DEFAULT_LOG_LEVEL,
+	"310D: Logical block reference tag error detected by the IOA"},
+	{0x0410A100, 0, IPR_DEFAULT_LOG_LEVEL,
+	"310D: Logical block guard error detected by the IOA"},
 	{0x04118000, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9000: IOA reserved area data check"},
 	{0x04118100, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9001: IOA reserved area invalid data pattern"},
 	{0x04118200, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9002: IOA reserved area LRC error"},
+	{0x04118300, 1, IPR_DEFAULT_LOG_LEVEL,
+	"Hardware Error, IOA metadata access error"},
 	{0x04320000, 0, IPR_DEFAULT_LOG_LEVEL,
 	"102E: Out of alternate sectors for disk storage"},
 	{0x04330000, 1, IPR_DEFAULT_LOG_LEVEL,
@@ -348,6 +378,8 @@ struct ipr_error_table_t ipr_error_table
 	"Illegal request, commands not allowed to this device"},
 	{0x05258100, 0, 0,
 	"Illegal request, command not allowed to a secondary adapter"},
+	{0x05258200, 0, 0,
+	"Illegal request, command not allowed to a non-optimized resource"},
 	{0x05260000, 0, 0,
 	"Illegal request, invalid field in parameter list"},
 	{0x05260100, 0, 0,


  parent reply	other threads:[~2010-02-19 21:24 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20100219210900.066268168@linux.vnet.ibm.com>
2010-02-19 21:23 ` [patch 1/9] ipr: add support for new adapter command structures for the next generation chip Wayne Boyer
2010-02-19 21:23 ` [patch 2/9] ipr: define new offsets to registers " Wayne Boyer
2010-02-19 21:23 ` [patch 3/9] ipr: update the configuration table code " Wayne Boyer
2010-02-19 21:24 ` [patch 4/9] ipr: add error handling updates " Wayne Boyer
2010-02-19 21:24 ` [patch 5/9] ipr: add hardware assisted smart dump functionality Wayne Boyer
2010-02-19 21:24 ` [patch 6/9] ipr: implement shutdown changes and remove obsolete write cache parameter Wayne Boyer
2010-02-19 21:24 ` [patch 7/9] ipr: add support for multiple stages of initialization Wayne Boyer
2010-02-19 21:24 ` Wayne Boyer [this message]
2010-02-19 21:24 ` [patch 9/9] ipr: adds PCI ID definitions for new adapters Wayne Boyer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4B7F0190.9040009@linux.vnet.ibm.com \
    --to=wayneb@linux.vnet.ibm.com \
    --cc=James.Bottomley@suse.de \
    --cc=brking@linux.vnet.ibm.com \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox