linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Brian King <brking@linux.vnet.ibm.com>
To: Wayne Boyer <wayneb@linux.vnet.ibm.com>
Cc: James Bottomley <James.Bottomley@suse.de>,
	linux-scsi <linux-scsi@vger.kernel.org>
Subject: Re: [PATCH 3/3] ipr: fix a register read to use the correct address for 64 bit adapters
Date: Mon, 10 May 2010 11:21:37 -0500	[thread overview]
Message-ID: <4BE83291.6030603@linux.vnet.ibm.com> (raw)
In-Reply-To: <4BE830CF.1090603@linux.vnet.ibm.com>

Acked-by: Brian King <brking@linux.vnet.ibm.com>

On 05/10/2010 11:14 AM, Wayne Boyer wrote:
> Fix ipr_reset_enable_ioa() to read the correct IOA to host interrupt register
> address for 64 bit adapters.  We need to read the lower 32 bits, not the upper
> 32 bits.
> 
> Also change the write of the 64 bit mask value to a single writeq instead
> of two writel calls.
> 
> Finally, use the correct u8 type for the type field in the ipr_resource_entry
> structure.
> 
> Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com>
> ---
> 
>  drivers/scsi/ipr.c |   12 ++++++++----
>  drivers/scsi/ipr.h |    2 +-
>  2 files changed, 9 insertions(+), 5 deletions(-)
> 
> Index: b/drivers/scsi/ipr.c
> ===================================================================
> --- a/drivers/scsi/ipr.c	2010-05-07 09:46:11.000000000 -0700
> +++ b/drivers/scsi/ipr.c	2010-05-07 09:46:12.000000000 -0700
> @@ -7184,13 +7184,14 @@ static int ipr_reset_enable_ioa(struct i
>  {
>  	struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
>  	volatile u32 int_reg;
> +	volatile u64 maskval;
> 
>  	ENTER;
>  	ipr_cmd->job_step = ipr_ioafp_identify_hrrq;
>  	ipr_init_ioa_mem(ioa_cfg);
> 
>  	ioa_cfg->allow_interrupts = 1;
> -	int_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
> +	int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32);
> 
>  	if (int_reg & IPR_PCII_IOA_TRANS_TO_OPER) {
>  		writel((IPR_PCII_ERROR_INTERRUPTS | IPR_PCII_HRRQ_UPDATED),
> @@ -7202,9 +7203,12 @@ static int ipr_reset_enable_ioa(struct i
>  	/* Enable destructive diagnostics on IOA */
>  	writel(ioa_cfg->doorbell, ioa_cfg->regs.set_uproc_interrupt_reg32);
> 
> -	writel(IPR_PCII_OPER_INTERRUPTS, ioa_cfg->regs.clr_interrupt_mask_reg32);
> -	if (ioa_cfg->sis64)
> -		writel(IPR_PCII_IPL_STAGE_CHANGE, ioa_cfg->regs.clr_interrupt_mask_reg);
> +	if (ioa_cfg->sis64) {
> +		maskval = IPR_PCII_IPL_STAGE_CHANGE;
> +		maskval = (maskval << 32) | IPR_PCII_OPER_INTERRUPTS;
> +		writeq(maskval, ioa_cfg->regs.clr_interrupt_mask_reg);
> +	} else
> +		writel(IPR_PCII_OPER_INTERRUPTS, ioa_cfg->regs.clr_interrupt_mask_reg32);
> 
>  	int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
> 
> Index: b/drivers/scsi/ipr.h
> ===================================================================
> --- a/drivers/scsi/ipr.h	2010-05-07 09:46:11.000000000 -0700
> +++ b/drivers/scsi/ipr.h	2010-05-07 09:46:12.000000000 -0700
> @@ -1201,7 +1201,7 @@ struct ipr_resource_entry {
>  	u8 flags;
>  	__be16 res_flags;
> 
> -	__be32 type;
> +	u8 type;
> 
>  	u8 qmodel;
>  	struct ipr_std_inq_data std_inq_data;
> 


-- 
Brian King
Linux on Power Virtualization
IBM Linux Technology Center

      reply	other threads:[~2010-05-10 16:21 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20100510160631.899608040@linux.vnet.ibm.com>
2010-05-10 16:13 ` [PATCH 1/3] ipr: implement fixes for 64 bit adapter support Wayne Boyer
2010-05-10 16:15   ` Brian King
2010-05-10 16:13 ` [PATCH 2/3] ipr: include the resource path in the IOA status area structure Wayne Boyer
2010-05-10 16:20   ` Brian King
2010-05-10 16:14 ` [PATCH 3/3] ipr: fix a register read to use the correct address for 64 bit adapters Wayne Boyer
2010-05-10 16:21   ` Brian King [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4BE83291.6030603@linux.vnet.ibm.com \
    --to=brking@linux.vnet.ibm.com \
    --cc=James.Bottomley@suse.de \
    --cc=linux-scsi@vger.kernel.org \
    --cc=wayneb@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).