linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeff Garzik <jeff@garzik.org>
To: Tejun Heo <tj@kernel.org>
Cc: linux-ide@vger.kernel.org, jens.axboe@oracle.com,
	linux-scsi@vger.kernel.org, James.Bottomley@suse.de,
	linux-kernel@vger.kernel.org, ben@decadent.org.uk,
	davem@davemloft.net, bzolnier@gmail.com
Subject: Re: [PATCH 6/8] SCSI: implement sd_unlock_native_capacity()
Date: Wed, 02 Jun 2010 13:50:47 -0400	[thread overview]
Message-ID: <4C0699F7.20004@garzik.org> (raw)
In-Reply-To: <1273946974-29131-7-git-send-email-tj@kernel.org>

On 05/15/2010 02:09 PM, Tejun Heo wrote:
> Implement sd_unlock_native_capacity() method which calls into
> hostt->unlock_native_capacity() if implemented.  This will be invoked
> by block layer if partitions extend beyond the end of the device and
> can be used to implement, for example, on-demand ATA host protected
> area unlocking.
>
> Signed-off-by: Tejun Heo<tj@kernel.org>
> Cc: Ben Hutchings<ben@decadent.org.uk>
> ---
>   drivers/scsi/sd.c        |   22 ++++++++++++++++++++++
>   include/scsi/scsi_host.h |    8 ++++++++
>   2 files changed, 30 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
> index 8b827f3..b85906e 100644
> --- a/drivers/scsi/sd.c
> +++ b/drivers/scsi/sd.c
> @@ -97,6 +97,7 @@ MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC);
>   #endif
>
>   static int  sd_revalidate_disk(struct gendisk *);
> +static void sd_unlock_native_capacity(struct gendisk *disk);
>   static int  sd_probe(struct device *);
>   static int  sd_remove(struct device *);
>   static void sd_shutdown(struct device *);
> @@ -1100,6 +1101,7 @@ static const struct block_device_operations sd_fops = {
>   #endif
>   	.media_changed		= sd_media_changed,
>   	.revalidate_disk	= sd_revalidate_disk,
> +	.unlock_native_capacity	= sd_unlock_native_capacity,
>   };
>
>   static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
> @@ -2101,6 +2103,26 @@ static int sd_revalidate_disk(struct gendisk *disk)
>   }
>
>   /**
> + *	sd_unlock_native_capacity - unlock native capacity
> + *	@disk: struct gendisk to set capacity for
> + *
> + *	Block layer calls this function if it detects that partitions
> + *	on @disk reach beyond the end of the device.  If the SCSI host
> + *	implements ->unlock_native_capacity() method, it's invoked to
> + *	give it a chance to adjust the device capacity.
> + *
> + *	CONTEXT:
> + *	Defined by block layer.  Might sleep.
> + */
> +static void sd_unlock_native_capacity(struct gendisk *disk)
> +{
> +	struct scsi_device *sdev = scsi_disk(disk)->device;
> +
> +	if (sdev->host->hostt->unlock_native_capacity)
> +		sdev->host->hostt->unlock_native_capacity(sdev);
> +}
> +
> +/**
>    *	sd_format_disk_name - format disk name
>    *	@prefix: name prefix - ie. "sd" for SCSI disks
>    *	@index: index of the disk to format name for
> diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
> index c50a97f..b7bdecb 100644
> --- a/include/scsi/scsi_host.h
> +++ b/include/scsi/scsi_host.h
> @@ -327,6 +327,14 @@ struct scsi_host_template {
>   			sector_t, int []);
>
>   	/*
> +	 * This function is called when one or more partitions on the
> +	 * device reach beyond the end of the device.
> +	 *
> +	 * Status: OPTIONAL
> +	 */
> +	void (*unlock_native_capacity)(struct scsi_device *);
> +
> +	/*

applied 6-8, including this SCSI patch



  parent reply	other threads:[~2010-06-02 17:50 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-05-15 18:09 [PATCHSET] block,libata: implement ->unlock_native_capacity() Tejun Heo
2010-05-15 18:09 ` [PATCH 1/8] buffer: make invalidate_bdev() drain all percpu LRU add caches Tejun Heo
2010-05-16  7:11   ` David Miller
2010-05-15 18:09 ` [PATCH 2/8] block: restart partition scan after resizing a device Tejun Heo
2010-05-16  7:15   ` David Miller
2010-05-15 18:09 ` [PATCH 3/8] block,ide: simplify bdops->set_capacity() to ->unlock_native_capacity() Tejun Heo
2010-05-15 18:48   ` Bartlomiej Zolnierkiewicz
2010-05-15 18:58     ` Tejun Heo
2010-05-16  7:15   ` David Miller
2010-05-15 18:09 ` [PATCH 4/8] block: use struct parsed_partitions *state universally in partition check code Tejun Heo
2010-05-16  7:16   ` David Miller
2010-05-15 18:09 ` [PATCH 5/8] block: improve automatic native capacity unlocking Tejun Heo
2010-05-16  7:17   ` David Miller
2010-05-15 18:09 ` [PATCH 6/8] SCSI: implement sd_unlock_native_capacity() Tejun Heo
2010-05-16  7:18   ` David Miller
2010-05-16 13:39   ` James Bottomley
2010-05-16 15:07     ` Ben Hutchings
2010-05-16 16:00       ` James Bottomley
2010-05-16 17:00         ` Tejun Heo
2010-05-16 19:23           ` James Bottomley
2010-05-17  5:30             ` Tejun Heo
2010-06-02 17:50   ` Jeff Garzik [this message]
2010-05-15 18:09 ` [PATCH 7/8] libata: use the enlarged capacity after late HPA unlock Tejun Heo
2010-05-15 19:22   ` Jeff Garzik
2010-05-16  7:18   ` David Miller
2010-05-15 18:09 ` [PATCH 8/8] libata: implement on-demand HPA unlocking Tejun Heo
2010-05-15 19:22   ` Jeff Garzik
2010-05-16  7:19   ` David Miller
2010-05-19  7:05 ` [PATCHSET] block,libata: implement ->unlock_native_capacity() Tejun Heo
2010-05-19  7:08   ` Jens Axboe
2010-06-02 16:37 ` Tejun Heo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4C0699F7.20004@garzik.org \
    --to=jeff@garzik.org \
    --cc=James.Bottomley@suse.de \
    --cc=ben@decadent.org.uk \
    --cc=bzolnier@gmail.com \
    --cc=davem@davemloft.net \
    --cc=jens.axboe@oracle.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=tj@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).